Page 1
Errors excepted. No warranty for the correctness of the information St
ate
:
30.08.2017
IPC 1.5U-1528L
The 1.5U-1528L is the perfect rack for a small server system. The
special design in 1.5U enables you to run two external drives (2.5" or
3.5") in Hot-Swap mode on an ITX-Mainboard base. The interior offers
the option to mount two additional 2.5" drives and more height for
CPU-cooler than a regular 1U case.
Two serial 60mm fans behind the front panel ensure a reliable cooling.
It also offers two USB front connectors in the front, next to the
controls.
more space than 1U racks
2x 60mm Fan
Depth only 280mm
Aluminum front
Page 2
Errors excepted. No warranty for the correctness of the information State
:
30.08.2017
Specifications
Motherboard Mini-ITX
Drive Bays 2.5" or 3.5" Hot-Swap (max. 6G): 2
Front Connectors USB 2.0: 2
Cooling System Front: 2x 60mm
Controls Power-Button
LED Power
Material 1.0/1.2mm Steel
Packing Units Shipping unit: 1 Piece
Warranty 24 Months
Article Number
EAN-Code
Scope of Delivery Screw Set
Features Option to mount Flex-ATX PSU´s
Dimensions and Weight
Cage Case Package
Height 65mm 65mm 185mm
Width 423mm 482mm 430mm
Depth 280mm 314mm 560mm
Weight (net): 4.29 kgs
Weight (gross): 6.03 kgs
Certification:
Max board dimensions WxH: 170mm x 170mm, 6.7" x 6.7"
2.5" internal: 2
(serial, Molex connector)
Reset-Button
HDD Activity
Pallet: 32 Pieces
4260455641722
Only 280mm Depth
2x 60mm serial fans
Two Riser-Slots for expansion cards
(full height max. 7cm depth, half height max. 9cm depth)
USB 2.0 intern as block connector
Power Supply
Connector Quantity Max. Length
Mainboard 20+4Pin - -
P4 12V 4Pin - -
P4/EPS 4+4Pin - -
P8 12V 8Pin - -
PCI-Express 6+2Pin - -
PCI-Express 6Pin - -
IDE 4Pin - -
S-ATA - -
Floppy - -
RPM sensor cable - -
Fan Control - -
Fan: 120mm - -
88887210
(without grips)
Loading...