Interspace Industries MicroCue2 User Manual

Cueing and Presentation Control Specialists

MicroCue2

User Manual

2

Contents:

Introduction 3

Safety Instructions 4

Diagrams 5

Regulations Compliance 6

Operating Instructions 10

Programming Special Cues 12

Special Requirements 14

Radio Frequency System 14

Equipment Supplied 15

Technical Support Contact 15

3

Introduction

MicroCue2 is the mobile professional’s 1st choice presentation cueing
system. Featuring USB interfacing, MicroCue

2

can connect to computers
and directly control up to 2 PowerPoint presentations as in main and back
up or a separate presentation for notes etc., as well as providing visual
and audible cues. The system design provides for a highly portable and a
quick, easy-to-set-up presentation control system.

MicroCue

2

is based on the Interspace Industries MasterCue series
platform, retaining proven features such as the robust case design and the
AV industrial grade wireless RF system.

With 3 buttons the presenter can request to go backwards as well as
forwards if required, or to communicate an alternative presentation
function (e.g. go to black or restart). The visual and audible cues are easy
to understand and designed to clearly indicate which button has been
pushed and what cue action is required.

MicroCue2

- For Professional Presentations on the Move!

We hope MicroCue

2

exceeds your expectations and welcome any

feedback that you have about this or any of our products.

Thank you.

The Interspace Industries Team
www.interspaceind.com

4

Safety Instructions

All safety and operating instructions should be read before this product is operated and
should be retained for further reference. Please adhere to all the warnings on this product
and in these operating instructions. Please follow these instructions carefully.

Power. Only use the power source indicated on the device. Devices equipped with a
grounded plug should only be used with a grounded type outlet. In no way should this
grounding be disconnected, modified or suppressed.

Power Supply Lead. To unplug the device always pull by the plug itself, not the power
supply lead. The power source outlet should always be near the MicroCue main unit and
easily accessible. Ensure the power supply lead cannot be walked on or damaged by items
placed on or against it. Do not use if the power supply lead is damaged. Using the device
with a damaged power supply lead may expose you to electric shock or other hazards.
Check the condition of the power supply lead regularly. Contact your dealer or service centre
immediately for a replacement if damaged.

Keep Away From Harmful Substances

To prevent the risk of electric shock and fire, do not expose this device to rain, humidity or
intense heat sources (such as radiators or direct sunlight). Avoid using this equipment in
environments where there is excessive heat, dust, moisture, chemicals, vibration or
mechanical shocks.

Slots and Openings. These are designed into the device for ventilation and to avoid
overheating. Always ensure these openings remain clear. Do not attempt to insert
anything into these openings under any circumstances. If liquids have been spilled on,
or objects have fallen into the product it must be checked by a qualified technician before re­using.

Connections. All inputs and outputs (except for power input) are TBTS defined under
EN60950.

DO NOT OPEN SYSTEM DUE TO HIGH VOLTAGE.
DO NOT IMMERSE IN WATER.

If you have any queries regarding these safety instructions or how to maintain the unit please
do not hesitate to contact us on:

[phone]

Servicing. Do not attempt to service this product yourself. Opening or removing covers and
screws may expose you to electric shocks or other hazards. Refer all servicing to qualified
service personnel.

5

Diagrams

Figure 1 MicroCue Connections Diagram

Figure 2 MicroCue Rear Panel

12VDC Power Input

Mini Jack Headphone

Cue Tone Output

RF Level Indicator

BNC Aerial Connector

USB Connections

Keyboard Program

Input