Intersil has initiated a Vendor Item Drawing
(VID) compliance program intended to offer
value-added, cost-effective solutions to military,
aerospace and other harsh-environment
customers who believe that an extended
temperature plastic packaged part is suitable
for their particular application. Intersil’s VID
offering is a market driven strategy, that
brings a broad range of Intersil’s newest
high performance analog, digital and power
management products to the high reliability
marketplace. The VID program is recognized
by DSCC (Defense Supply Center Columbus),
with DSCC generated part numbers which will
also be available on their web site:
VID products offer an alternative to upscreening for customers that need performance
above and beyond the standard limits of
commercial grade components. Intersil’s VID
products receive additional verifi cation and/or
screening vs their commercial counterparts.
VID products are not MIL-PRF-38535 (QML)
qualifi ed, and hence may not be suitable for
all end applications and environments. For
applications that need a ceramic/hermetic
packaged component and/or QML screening,
Intersil continues to offer a broad range of
military and Hi-Rel products. These products
can be found within the Product Selection
Guide under the Mil/Hi-Rel product section:
www.intersil.com/design/psg/Military_Space.
pdf
www.intersil.com/military |
www.BDTIC.com/Intersil
Salient Features of
Intersil’s VID Offering
Enhanced Obsolescence Management
3
Enhanced Lot Combination and Traceability
Practices
Full homogenous lot process in wafer fab
•
No combination of wafer fabrication lots in
•
assembly
Full traceability through assembly and test by
•
date/trace code assignment
Full Mil-Temp Electrical
Performance
Controlled Baseline for
Enhanced Homogeneity
One wafer fabrication site
•
One assembly site
•
Enhanced PCN (Process
Change Notifi cation)
Change Notifi cation is per MIL-PRF-38535 with a
90 days advance notice (Notifi cation only)
Intersil provides an opportunity for end of
•
life purchase for all Form, Fit, or Function
changes
Notifi cations provided 18 months in advance
of product obsolescence with the following
provisions:
Up to 12 months from the notice date the
•
customer may place purchase orders for end
of life buys
Up to 6 months from the end of the end of life
•
buy date and 18 months from the notice date
shipments may be made to the customer
Plastic Encapsulated Package
Eliminates need for
Up-Screening a COTS
Component
Eliminate extra logistics,
•
product/drawing
maintenance and device
testing
Remove need to add excess guard band for
•
unknown lot to lot performance variability
Reduce concerns about reliability from
•
extended temp use
Electro-migration and current density
•
validated for extended temperature use
Reduced Cost vs. QML/Class-Q SMD
(Standard Microcircuit Drawing) Products
Intersil Defi ned Process Flow
Standard VID (V62/xxxxx) Datasheet
Available on DSCC Website:
http://www.dscc.dla.mil/Programs/MilSpec/
listdwgs.asp?DocTYPE=VID
| www.intersil.com/military
www.BDTIC.com/Intersil
4
Intersil’s New VID Selection Chart
Intersil’s fi rst VID products include power management and general purpose analog solutions.
Please contact your local sales offi ce for samples, pricing, and availability.
Single-Ended, Peak Current Mode PWM Controllers with 3% Current Limit
Rising
UVLO
Device NumberVID#
ISL8840AMBEPV62/07621-01XB76.6302.91100Boost, Flyback and Forward DC-
ISL8841AMBEPV62/07621-02XB76.6302.9150Boost, Flyback and Forward DC-
ISL8842AMBEPV62/07621-03XB14.38.8302.91100Off-line Boost, Flyback and
ISL8843AMBEPV62/07621-04XB8.47.6302.91100Boost, Flyback and Forward DC-
ISL8844AMBEPV62/07621-05XB14.38.8302.9150Off-line Boost, Flyback and
ISL8845AMBEPV62/07621-06XB8.47.6302.9150Boost, Flyback and Forward DC-
(V)
Falling
UVLO
(V)
Max
V
BIAS
(V)
Operating
Current
(mA)
Max
I
OUT
(A)
Max
Duty-cycle
(%)Target Application
DC Converters
DC Converters
Forward DC-DC Converters
DC Converters
Forward DC-DC Converters
DC Converters
Single, Synchronous Buck PWM Controllers
Min VIN
Device Number
ISL6406MREP3.350.85203.3 to 5POL Buck Converters
ISL6420BMAEP4.5280.6V
(V)
Max VIN
(V)
Min V
(V)
OUT
Max V
OUT
(V)
-0.5205POL Buck Converters
IN
Max I
(A)
OUT
V
BIAS
(V)Target Application
Dual Synchronous Integrated FET Buck Regulator
Switching
Min V
IN
Device Number
ISL65426MREP2.55.51.03.36 (125C J)1FPGA/CPLD/DSP
(V)
Max VIN
(V)
Min V
(V)
OUT
Max V
(V)
OUT
Max I
(A)
OUT
Frequency
(MHz)Target Application
Dual, Low Noise LDO
Min V
Device Number
ISL9000AMRNCEP2.36.53002009030Low Noise Supplies
IN
(V)
Max VIN
(V)
I
OUT
(mA)
Dropout
(mA)
Min PSRR
(dB)
Noise Level
(Vrms)Target Application
60V Buck Regulator with Integrated FET
Switching
Min V
IN
Device Number
ISL8560MREP9601.2552100-600Non-Isolated Supplies
(V)
Max VIN
(V)
Min V
(V)
OUT
Max V
(V)
OUT
Max I
(A)
OUT
Frequency
(kHz)Target Application
Single Supply, I2C Interface, 128-tap DCP
Min V
Device Number
ISL22316WMUEP
ISL22326WMVEP
ISL22346WMVEP
IN
(V)
2.75.557010General Purpose Analog
Max VIN
(V)
Shutdown Current
(A)
Wiper Resistance
(Ω)
Total Resistance
(kΩ)Target Application
www.intersil.com/military |
www.BDTIC.com/Intersil
Intersil plans to expand VID offering of commercially available products that
have key differentiators applicable to Hi-Rel market. These new product areas
include Interface, MOSFET Drivers, Real Time Clocks, and Video.
Potential VID Version of Commercial Products
Product FamilyPotential Products
Interface
Low Side Drivers
Real Time ClocksISL12027/8/9: Real Time Clock/Calendar with EEPROM
Buffered Crosspoint Switches
Video Drivers
Delay LinesEL9115: Triple Analog Video Delay Line
Muxes
Sync Separators
Voltage References
Precision Op Amps
Bridge DriversISL2100A/01A: 100V, 2A Peak, High Frequency Half-Bridge Drivers
EL7202: Hi-speed Dual, Non-inverting Power MOSFET Drivers
EL7212: Hi-speed Dual, Inverting Power MOSFET Drivers
EL7222: Hi-speed Dual, complementary Power MOSFET Drivers
ISL59532: 32x32 Video Crosspoint
ISL59533: 32x32 Video Crosspoint with Differential Inputs
ISL59830A: True Single Supply Video Driver With Power Down
ISL59112: 40MHz Rail-to-Rail Video Buffer
ISL59115: Triple Channel Video Driver with LPF
ISL43681: Low-Voltage, Single and Dual Supply, 8 to 1 Multiplexer
ISL43741: Low-Voltage, Single and Dual Supply, Differential 4 to 1 Multiplexer
EL4583A: Sync Separator, 50% Slice, S-H, Filter, H
ISL59885: Auto-Adjusting Sync Separator for HD and SD Video
ISL21007: Precision, Low Noise FGA™ Voltage References
ISL21009: High Voltage Input Precision, Low Noise FGA™ Voltage References
ISL28156/8: 34μA Micro-power Single Precision Rail-to-Rail Input-Output (RRIO)
Low Input Bias Current Op Amps
OUT
5
| www.intersil.com/military
www.BDTIC.com/Intersil
6
Newly Released Military SMD Products
Intersil has a strong heritage of supplying memory, microprocessor
peripherals and analog products to the Hi-Rel marketplace for over
35 years. Intersil continues to develop new SMD products that are
offered in hermetic packages and with guaranteed performance over a
-55°C to +125°C temperature range. SMD products are MIL-PRF-38535
compliant and are 100% burned in.
The following Military SMD RS-232 transceiver products were recently released.
3V and 5V RS-232 Interface Products with 15kV HBM ESD
Commercial Part#
EquivalentSMD#PackageConfi guraton
5V Devices
ICL3243E5962-0620701Q3A28 Ld CLCC 3Tx/5Rx
ICL3238E5962-0620702Q3A28 Ld CLCC5Tx/3Rx
ICL3232E5962-0620703Q2A20 Ld CLCC2Tx/2Rx
ICL3221E5962-0620704Q2A20 Ld CLCC1Tx/1Rx
3V Devices
ICL3243E5962-0620705Q3A28 Ld CLCC 3Tx/5Rx
ICL3238E 5962-0620706Q3A28 Ld CLCC 5Tx/3Rx
ICL3232E5962-0620707Q2A20 Ld CLCC 2Tx/2Rx
ICL3221E5962-0620708Q2A20 Ld CLCC1Tx/1Rx
Contact your local sales offi ce for availability of these new high speed Op Amps.
New High Speed Op Amp Products
Commercial Part#
EquivalentSMD #PackageDescription
EL81025962-0623501QPC8 Ld SideBraze DIPSingle, 500MHz Rail-to-rail Op Amp with Enable
EL81035962-0623502QPC8 Ld SideBraze DIPSingle, 500MHz Rail-to-rail Op Amp
EL51325962-0623601QPC8 Ld SideBraze DIPSingle, 650MHz A
Enable
EL51335962-0623602QPC8 Ld SideBraze DIPSingle, 650MHz A
EL51065962-0625501QXC10 Ld FlatpackSingle, 300MHz FGA A
EL51665962-0625601QXC10 Ld FlatpackSingle, 1.2GHz CFA with Enable
EL51675962-0625602QXC10 Ld FlatpackSingle, 1.2GHz CFA
EL81085962-0721201QXC10 Ld FlatpackVideo Distribution Amplifi er
EL82025962-0721301QXC10 Ld FlatpackDual, 500MHz Rail-to-rail Op Amp with Enable
EL82035962-0721302QXC10 Ld FlatpackDual, 500MHz Rail-to-rail Op Amp
EL84035962-0721303QYC14 Ld FlatpackQuad, 500MHz Railt-to-rail Op Amp
= 10 Low Noise VFA with
V
= 10 Low Noise VFA
V
= ±1, 2, with Enable
O
Mil compliant packages per MIL-STD-1835
http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1835/std1835.pdf
www.intersil.com/military |
www.BDTIC.com/Intersil
Military IC Selection Guide
These new SMD offerings are representative of Intersil’s ability to bring its latest high performance analog
offerings to the Military marketplace. If you have other Intersil COTS products that you would like to see in
VID or SMD please contact your local Intersil sales offi ce.
DSCC SMD (Non-Rad hard)
Auxiliary Output
DeviceDevice DescriptionPackage
5962M95A0501QXASMD Version Auxiliary Output Chip40 Ld LCC
5962M95A0501QYASMD Version Auxilary Output Chip28 Ld SBDIP