RURP3060
Data Sheet January 2000
30A, 600V Ultrafast Diode
The RURP3060 is an ultrafast diode (trr< 55ns) with soft
recovery characteristics. It has a low forward voltage drop
and is of planar, silicon nitride passivated, ion-implanted,
epitaxial construction.
This device is intended for use as an energy steering/
clamping diode and rectifier in a variety of switching power
supplies and other power switching applications. Its low
stored charge and ultrafast recovery with soft recovery
characteristics minimize ringing and electrical noise in many
power switching circuits, thus reducing power loss in the
switching transistor.
Formerly developmental type TA09903.
Ordering Information
PART NUMBER PACKAGE BRAND
RURP3060 TO-220AC RURP3060
NOTE: When ordering, use the entire part number.
Symbol
K
File Number 2776.4
Features
• Ultrafast with Soft Recovery . . . . . . . . . . . . . . . . . . < 55ns
• Operating Temperature. . . . . . . . . . . . . . . . . . . . . . .175
o
• Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . .600V
• Avalanche Energy Rated
• Planar Construction
Applications
• Switching Power Supply
• Power Switching Circuits
• General Purpose
Packaging
JEDEC TO-220AC
ANODE
CATHODE
CATHODE
(FLANGE)
C
A
Absolute Maximum Ratings T
Peak Repetitive Reverse Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V
Working Peak Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V
DC Blocking Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V
Average Rectified Forward Current (TC = 130oC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I
Repetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .I
(Square Wave, 20kHz)
Nonrepetitive Peak Surge Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I
(Halfwave 1 Phase 60Hz)
Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P
Avalanche Energy (See Figures 7 and 8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E
Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T
= 25oC, Unless Otherwise Specified
C
RRM
RWM
F(AV)
FRM
FSM
STG
AVL
, T
RURP3060 UNITS
600 V
600 V
R
D
J
600 V
30 A
70 A
325 A
125 W
20 mJ
-55 to 175
o
C
1
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 2000
RURP3060
Electrical Specifications T
= 25oC, Unless Otherwise Specified
C
TEST
SYMBOL
V
F
IF = 30A - - 1.5 V
CONDITION MIN TYP MAX UNITS
IF = 30A, TC = 150oC - - 1.3 V
I
R
VR = 600V - - 250 µA
VR = 600V, TC = 150oC--1mA
t
rr
IF = 1A, dIF/dt = 100A/µs--55ns
IF = 30A, dIF/dt = 100A/µs--60ns
t
a
t
b
R
θJC
IF = 30A, dIF/dt = 100A/µs - 30 - ns
IF = 30A, dIF/dt = 100A/µs - 20 - ns
- - 1.2
DEFINITIONS
VF = Instantaneous forward voltage (pw = 300µs, D = 2%).
IR = Instantaneous reverse current.
trr = Reverse recovery time at dIF/dt = 100A/µs (See Figure 6), summation of ta + tb.
ta = Time to reach peak reverse current at dIF/dt = 100A/µs (See Figure 6).
tb = Time from peak IRM to projected zero crossing of IRM based on a straight line from peak IRM through 25% of IRM (See Figure 6).
R
= Thermal resistance junction to case.
θJC
pw = Pulse width.
D = Duty cycle.
o
C/W
Typical Performance Curves
200
100
175oC
10
100oC
, FORWARD CURRENT (A)
F
I
1
0 0.5 1 1.5 2.52
VF, FORWARD VOLTAGE (V)
25oC
FIGURE 1. FORWARD CURRENT vs FORWARD VOLTAGE FIGURE 2. REVERSE CURRENT vs REVERSE VOLTAGE
1000
100
10
1
, REVERSE CURRENT (µA)
0.1
R
I
0.01
0 100 200 300 500 600400
VR, REVERSE VOLTAGE (V)
25
175oC
100
o
C
o
C
2