Intersil RHRP6120CC Datasheet
RHRP6120CC
July 1996 File Number 4091.1
6A, 1200V Hyperfast Dual Diode
The RHRP6120CC is a hyperfast dual diode with soft
recovery characteristics (tRR < 55ns). It has half the
recovery time of ultrafast diodes and is silicon nitride
passivated ion-implanted epitaxial planar construction.
This device is intended for use as a freewheeling/clamping
diode and rectifier in a variety of switching power supplies
and other powerswitchingapplications.Itslow stored charge
and hyperfast soft recovery minimize ringing and electrical
noise in many power switching circuits reducing power loss
in the switching transistors.
Formerly developmental type TA49058.
PACKAGE AVAILABILITY
PART NUMBER PACKAGE BRAND
RHRP6120CC TO-220AB RHR6120C
NOTE: When ordering, use the entire part number.
Features
• Hyperfast with Soft Recovery . . . . . . . . . . . . . . . .<55ns
• Operating Temperature . . . . . . . . . . . . . . . . . . . +175
o
• Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . .1200V
• Avalanche Energy Rated
• Planar Construction
Applications
• Switching Power Supplies
• Power Switching Circuits
• General Purpose
Symbol
K
A
1
A
2
C
Packaging
JEDEC TO-220AB
ANODE 2
CATHODE
ANODE 1
CATHODE (FLANGE)
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
RHRP6120CC
Absolute Maximum Ratings (Per Leg) T
= +25oC, Unless Otherwise Specified
C
RHRP6120CC UNITS
Peak Repetitive Reverse Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V
Working Peak Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V
RRM
RWM
DC Blocking Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V
Average Rectified Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .I
F(AV)
R
1200 V
1200 V
1200 V
6A
TC = 130oC
Repetitive Peak Surge Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I
FSM
12 A
Square Wave, 20kHz
Nonrepetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I
FSM
60 A
Halfwave, 1 Phase, 60Hz
Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P
Avalanche Energy (See Figures 10 and 11). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E
Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Electrical Specifications (Per Leg) T
= +25oC, Unless Otherwise Specified
C
D
AVL
STG,TJ
50 W
10 mJ
-65 to +175
o
C
SYMBOL TEST CONDITION MIN TYP MAX UNITS
V
F
IF = 6A, TC = +25oC - - 3.2 V
IF = 6A, TC = +150oC - - 2.6 V
I
R
VR = 1200V, TC = +25oC - - 100 µA
VR = 1200V, TC = +150oC - - 500 µA
t
RR
IF = 1A, dIF/dt = 200A/µs--55ns
IF = 6A, dIF/dt = 200A/µs--65ns
t
A
t
B
Q
RR
C
J
R
θJC
IF = 6A, dIF/dt = 200A/µs - 33 - ns
IF = 6A, dIF/dt = 200A/µs - 22 - ns
IF = 6A, dIF/dt = 200A/µs - 210 - nC
VR = 10V, IF = 0A - 22 - pF
--3oC/W
DEFINITIONS
VF = Instantaneous forward voltage (pw = 300µs, D = 2%).
= Instantaneous reverse current.
I
R
= Reverse recovery time (See Figure 9), summation of tA + tB.
t
RR
= Time to reach peak reverse current (See Figure 9).
t
A
= Time from peak IRM to projected zero crossing of IRM based on a straight line from peak IRM through 25% of IRM (See Figure 9).
t
B
= Reverse recovery charge.
Q
RR
= Junction Capacitance.
C
J
R
= Thermal resistance junction to case.
θJC
= Controlled Avalanche Energy (See Figures 10 and 11).
E
AVL
pw = pulse width.
D = duty cycle.
2
Loading...