Intersil JANSR2N7408 Datasheet

JANSR2N7408

Data Sheet December 1998 File Number

Formerly Available As FSF450R4,
Radiation Hardened, SEGR Resistant,
N-Channel Power MOSFETs

The Discrete Products Operation of Intersil has developeda
series of Radiation Hardened MOSFETs specifically
designed for commercial and military space applications.
Enhanced Power MOSFET immunity toSingleEvent Effects
(SEE), Single Event Gate Rupture (SEGR) in particular, is
combined with 100K RADS of total dose hardness to provide
devices which are ideally suited to harsh space
environments. The dose rate and neutron tolerance
necessary for military applications have not been sacrificed.

The Intersil portfolio of SEGR resistant radiation hardened
MOSFETs includes N-Channel and P-Channel devices in a
variety of voltage, current and on-resistance ratings.
Numerous packaging options are also available.

This MOSFET is an enhancement-mode silicon-gate power
field-effect transistor of the vertical DMOS (VDMOS)
structure. It is specially designed and processed to be
radiation tolerant. The MOSFET is well suited for
applications exposed to radiation environments such as
switching regulation, switching converters, motor drives,
relay drivers and drivers for high-power bipolar switching
transistors requiring high speed and low gate drive power.
This type can be operated directly from integrated circuits.

Features

• 9A, 500V, r

• Total Dose

- Meets Pre-RAD Specifications to 100K RAD (Si)

• Single Event

- Safe Operating Area Curve for Single Event Effects

- SEE Immunity for LET of 36MeV/mg/cm
to 80% of Rated Breakdown and V

• Dose Rate

- Typically Survives 3E9 RAD (Si)/s at 80% BV

- Typically Survives 2E12 if Current Limited to I

• Photo Current

- 30nA Per-RAD(Si)/s Typically

• Neutron

- Maintain Pre-RAD Specifications
for 3E12 Neutrons/cm

• Usable to 3E13 Neutrons/cm

DS(ON)

= 0.600Ω

2

2

with VDS up

of 10V Off-Bias

GS

2

Symbol

4637

DSS

DM

Also availableat other radiation and screening levels.See us
on the web, Intersil’ home page:
http://www.semi.intersil.com. Contact your local Intersil
Sales Office for additional information.

Ordering Information

PART NUMBER PACKAGE BRAND

JANSR2N7408 TO-254AA JANSR2N7408

Die Family TA17659.
MIL-PRF-19500/634.

Packaging

CAUTION: Beryllia Warning per MIL-S-19500

TO-254AA

G

S

D

refer to package specifications.

4-1

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.

www.intersil.com or 407-727-9207

| Copyright © Intersil Corporation 1999

JANSR2N7408

Absolute Maximum Ratings T

= 25oC, Unless Otherwise Specified

C

JANSR2N7408 UNITS

Drain to Source Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V

Drain to Gate Voltage (RGS = 20kΩ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V

DS

DGR

500 V
500 V

Continuous Drain Current

TC = 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .I

TC = 100oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .I

Pulsed Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .I

Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V

D
D

DM

GS

9A
6A

27 A

±20 V

Maximum Power Dissipation

TC = 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P

TC = 100oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P

T
T

125 W

50 W

Linear Derating Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.00 W/oC

Single Pulsed Avalanche Current, L = 100µH, (See Test Figure) . . . . . . . . . . . . . . . . . . . . . .I

Continuous Source Current (Body Diode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .I

Pulsed Source Current (Body Diode). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I

Operating and Storage Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TJ, T

STG

Lead Temperature (During Soldering). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T

AS

S

SM

L

27 A

9A

27 A

-55 to 150
300

o

C

o

C

(Distance >0.063in (1.6mm) from Case, 10s Max)

Weight (Typical). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operationofthe
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

Electrical Specifications T

= 25oC, Unless Otherwise Specified

C

9.3

g

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS

Drain to Source Breakdown Voltage BV
Gate Threshold Voltage V

DSSID

GS(TH)VGS

= 1mA, VGS = 0V 500 - - V

= VDS,

ID = 1mA

TC = -55oC - - 5.0 V
TC = 25oC 1.5 - 4.0 V
TC = 125oC 0.5 - - V

Zero Gate Voltage Drain Current I

Gate to Source Leakage Current I

DSS

GSS

VDS = 400V,
VGS = 0V

TC = 25oC--25µA
TC = 125oC - - 250 µA

VGS = ±20V TC = 25oC - - 100 nA

TC = 125oC - - 200 nA
Drain to Source On-State Voltage V
Drain to Source On Resistance r

Turn-On Delay Time t

DS(ON)VGS

DS(ON)12ID

d(ON)

Rise Time t
Turn-Off Delay Time t

d(OFF)

Fall Time t
Total Gate Charge (Not on slash sheet) Q

g(TOT)VGS

Gate Charge at 12V Q
Threshold Gate Charge (Not on slash sheet) Q
Gate Charge Source Q
Gate Charge Drain Q
Thermal Resistance Junction to Case R
Thermal Resistance Junction to Ambient R

r

f

g(12)

g(TH)

gs

gd

JC

θ

JA

θ

= 12V, ID = 9A - - 5.67 V

= 6A,

VGS = 12V

VDD = 250V, ID = 9A,
RL = 27.8Ω, VGS = 12V,
RGS = 2.35Ω

TC = 25oC - 0.425 0.600 Ω

TC = 125oC - - 1.20 Ω

- - 150 ns

- - 140 ns

- - 180 ns

- - 70 ns

= 0V to 20V VDD = 250V,

VGS = 0V to 12V - 110 150 nC

ID = 9A

- - 220 nC

VGS = 0V to 2V - - 8.2 nC

-2128nC

-4962nC

- - 1.00

o

C/W

--48oC/W

4-2

Source to Drain Diode Specifications

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS

Forward Voltage V
Reverse Recovery Time t

SD

rr

JANSR2N7408

ISD = 9A 0.6 - 1.8 V
ISD = 9A, dISD/dt = 100A/µs - - 810 ns

Electrical Specifications up to 100K RAD T

= 25oC, Unless Otherwise Specified

C

PARAMETER SYMBOL TEST CONDITIONS MIN MAX UNITS

Drain to Source Breakdown Volts (Note 3) BV
Gate to Source Threshold Volts (Note 3) V
Gate to Body Leakage (Notes 2, 3) I
Zero Gate Leakage (Note 3) I
Drain to Source On-State Volts (Notes 1, 3) V
Drain to Source On Resistance (Notes 1, 3) r

DS(ON)12VGS

DSS

GS(TH)VGS

GSS
DSS

DS(ON)VGS

VGS = 0, ID = 1mA 500 - V

= VDS, ID = 1mA 1.5 4.0 V
VGS = ±20V, VDS = 0V - 100 nA
VGS = 0, VDS = 400V - 25 µA

= 12V, ID = 9A - 5.67 V

= 12V, ID = 6A - 0.600 Ω

NOTES:

1. Pulse test, 300µs Max.

2. Absolute value.

3. Insitu Gamma bias must be sampled for both VGS = 12V, VDS = 0V and VGS = 0V, VDS = 80% BV

DSS

.

Single Event Effects (SEB, SEGR) Note 4

ENVIRONMENT (NOTE 5)

TEST SYMBOL

ION

SPECIES

TYPICAL LET

(MeV/mg/cm)

TYPICAL

RANGE (µ)

Single Event Effects Safe Operating Area SEESOA Ni 26 43 -15 500

Ni 26 43 -20 450
Br 37 36 -5 500
Br 37 36 -10 400
Br 37 36 -15 100

NOTES:

4. Testing conducted at Brookhaven National Labs; sponsored by Naval Surface Warfare Center (NSWC), Crane, IN.

5. Fluence = 1E5 ions/cm2 (typical), TC = 25oC.

6. Does not exhibit Single Event Burnout (SEB) or Single Event Gate Rupture (SEGR).

APPLIED

V

BIAS

GS

(V)

(NOTE 6)

MAXIMUM

VDSBIAS (V)

Typical Performance Curves

LET = 26MeV/mg/cm

600

500

400

(V)

300

DS

V

200

100

TEMP = 25oC

0

0 -10 -15 -20 -25

LET = 37MeV/mg/cm2, RANGE = 36µ

FLUENCE = 1E5 IONS/cm2 (TYPICAL)

-5
V

GS

Unless Otherwise Specified

2

, RANGE = 43µ

(V)

LIMITING INDUCTANCE (HENRY)

1E-3

1E-4

1E-5

1E-6

1E-7

30

DRAIN SUPPLY (V)

ILM = 10A

30A

100A

300A

30010010

FIGURE 1. SINGLE EVENT EFFECTS SAFE OPERATING AREA FIGURE 2. DRAIN INDUCTANCE REQUIRED TO LIMIT

GAMMA DOT CURRENT TO I

AS

4-3

1000