Intersil IH6201 Datasheet
Semiconductor
IH6201
OBSOLETE PRODUCT
April 1999
NO RECOMMENDED REPLACEMENT
Call Central Applications 1-800-442-7747
or email: centapp@harris.com
Features
• Driven Direct from TTL or CMOS Logic
• Translates Logic Levels Up to 30V Levels
• Switches 20V
Signals When Used in Conjunction
ACPP
with the IH401A Varafet (As An Analog Gate)
•t
≤ 300ns & t
ON
≤ 200ns for 30V Level Shifts
OFF
• Quiescent Supply Current ≤ 100µA for Any State (DC)
• Provides Both Normal & Inverted Outputs
Part Number Information
TEMP. RANGE
PART NUMBER
IH6201CJE 0 to 70 16 Ld CerDIP
IH6201MJE -55 to 125 16 Ld CerDIP
IH6201CPE 0 to 70 16 Ld PDIP
(oC) PACKAGE
Dual CMOS
Driver/Voltage Translator
Description
The IH6201 is a CMOS, Monolithic, Dual Voltage Translator;
it takes low level TTL or CMOS logic signals and converts
them to higher levels (i.e. to ±15V swings). This translator is
typically used in making solid state switches, or analog
gates.
When used in conjunction with the IH401A Varafets, the
combination makes a complete solid state switch capable of
switching signals up to 22V
frequency. This switch is a “break-before-make” type (i.e.
t
time < tON time). The combination has typical t
OFF
80ns and typical t
≈ 200ns for signals up to 20V
ON
amplitude.
A TTL “1” input strobe will force the θ driver output up to V+
level; the
θ output will be driven down to the V- level. When
the TTL input goes to “0”, the θ output goes to V- and
to V+; thus θ and
θ are 180o out of phase with each other.
These complementary outputs can be used to create a wide
variety of functions such as SPDT and DPDT switches, etc.;
alternatively the complementary outputs can be used to
drive N and P channel MOSFETs, to make a complete
CMOS analog gate.
and up to 20MHz in
P-P
OFF
in
P-P
θ goes
≈
Pinout
IH6201
(OUTLINE DWGS, JE, PE)
TOP VIEW
16
15
14
13
12
11
10
9
NC
NC
NC
NC
1
θ1
2
3
4
θ1
5
θ2
6
7
8
θ2
The driver typically uses +5V and ±15V power supplies,
howev er a wide r ange of V+ and V- is also possible. It is necessary that V+ > 5V for the driver to work properly, however.
Functional Diagram
NC
TTL INPUT 1
VGND
+5V
V+
TTL INPUT 2
NC
CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper IC Handling Procedures.
Copyright
© Harris Corporation 1998
4-1
File Number 3136.2
IH6201
Absolute Maximum Ratings Thermal Information
Supply Voltage (V+ to V-) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35V
V+. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35V
V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35V
V+ to VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40V
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to 125oC
CAUTION: Stresses above those listed in “Absolute Maxim um Ratings” ma y cause permanent damage to the device . This is a stress only rating and oper ation of
the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Storage Temperature Range. . . . . . . . . . . . . . . . . . .-65oC to 150oC
Lead Temperature (Soldering, 10s). . . . . . . . . . . . . . . . . . . . . 300oC
Electrical Specifications V+ = +15V, V- = -15V, V
PARAMETER TEST CONDITIONS
θ or θ Driver Output Swing VIN = 0V + 3V, Figure 3B - 28 - - 28 - V
VIN Strobe Level (“1”) for
Proper Translation
VIN Strobe Level (“0”) for
Proper Translation
IIN Input Strobe Current
Draw (for 0V - 5V Range)
tON Time VIN = 0V CL = 30pF Switching
t
Time VIN = 0V CL= 30pF Switching
OFF
I+ (V+) Power Supply
Quiescent Current
I- (V-) Power Supply
Quiescent Current
IL (VL) Power Supply
Quiescent Current
θ≥ 14V, θ≥ -14V 3.0 3.0 3.0 - 2.4 - V
θ≥ -14V, θ≥ 14V 0.4 0.4 0.4 - 0.8 - V
VIN = 0V or +5V ±1 ±110±1 ±110µA
Turn-on Time, Figure 3B
Turn-off Time, Figure 3B
VIN = 0V or +5V 100 100 100 100 100 100 µA
VIN = 0V or +5V 100 100 100 100 100 100 µA
VIN = 0V or +5V 100 100 100 100 100 100 µA
= +5V
L
IH6201CJE, CPE IH6201MJE
- 500 - - 500 - ns
- 500 - - 500 - ns
UNITS0oC25oC70oC -55oC25oC 125oC
P-P
DC
DC
4-2
Loading...