Intersil Corporation HS-2400RH Datasheet

HS-2400RH
Data Sheet September 1999
Radiation Hardened PRAM Four Channel Programmable Operational Amplifier
HS-2400RH is a four-channel programmable amplifier providing a level of versatility unsurpassed by any other monolithic operational amplifier. Versatility is achieved by employingfourinput amplifier channels, any one (or none) of which may be electronically selected and connected to a single output stage through DTL/TTL compatible address inputs. The device formed by the output and the selected pair of inputs is an op amp which delivers excellent slew rate, gain bandwidth and power bandwidth performance. Other advantageous features for these dielectrically isolated amplifiers include high voltage gain and input impedance coupled with low input offset voltage and offset current. External compensation is not required on this device at closed loop gains greater than 10.
Each channel of the HS-2400RH can be controlled and operated with suitable feedback networks in any of the standard op amp configurations. This specialization makes these amplifiers excellent components for multiplexing signal selection and mathematical function designs. With 20V/µs slew rate, 20MHz gain bandwidth and low input bias currents make these devices ideal building blocks for signal generators, active filters and data acquisition designs. Programmability, coupled with 9mV maximum offset voltage and 50nA offset current, make these amplifiers outstanding components for signal conditioning circuits.
Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed here must be used when ordering.
Detailed Electrical Specifications for these devices are contained in SMD 5962-95684. A “hot-link” is provided on our homepage for downloading. http://www.intersil.com/spacedefense/space.htm
File Number 4027.1
Features
• Electrically Screened to SMD # 5962-95684
• QML Qualified per MIL-PRF-38535 Requirements
• Total GAMMA Dose . . . . . . . . . . . . . . . . . . . .10k RAD(SI)
• Digital Programmability
• High Rate Slew
- Uncompensated . . . . . . . . . . . . . . . . . . . . . .20V/µs Min
- Compensated . . . . . . . . . . . . . . . . . . . . . . . . .6V/µs Min
• Wide Gain Bandwidth
- Uncompensated . . . . . . . . . . . . . . . . . . . . . .20MHz Min
- Compensated . . . . . . . . . . . . . . . . . . . . . . . . .4MHz Min
• High Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50kV/V Min
• Low Offset Current. . . . . . . . . . . . . . . . . . . . . . .50nA Max
• Single Capacitor Compensation for Unity Gain
• DTL/TTL Compatible Inputs
Applications
• Signal Selection/Multiplexing
• Operational Amplifier Gain Stage
• Oscillator Frequency
• Filter Characteristics
• Add-Subtract Functions
• Integrator Characteristics
• Comparator Levels
Pinout
16 LEAD CERAMIC DUAL-IN-LINE FRIT SEAL PACKAGE
(CERDIP) MIL-STD-1835 GDIP-T16
TOP VIEW
Ordering Information
INTERNAL
ORDERING NUMBER
5962D9568401VEA HS1-2400RH-Q -55 to 125
MKT. NUMBER
1
TEMP. RANGE
(oC)
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
+IN3
-IN3
+IN4
-IN4
-IN1
+IN1
-IN2
+IN2
www.intersil.com or 321-724-7143
+
3
3
-
2
3
+
4
-
4
5
­1
+
6
7
­2
+
8
OUTPUT AMP
D0
DECODE
CONTROL
| Copyright © Intersil Corporation 1999
16
15
14
13
12
11
10
9
D1
ENABLE
GND COMP
V+
OUT
V-
Test Circuit
HS-2400RH
100
100
100
100
100
100
100
100
V5
0.002
10K
0.002
10K
0.002
10K
0.002
10K
0.002
10K
0.002
10K
0.002
10K
0.002
10K
S7 1
S4
S3
S2
S1
V2
47pF 1µF
S51
2
1
S61
2
1
2
1
S62
2
1
2
1
S63
2
1
2
1
S64
2
1
VIN
200
2
A2
4.9K
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
S31
S41
S32
S42
S33
S43
S34
S44
1
2 1
2 1
2
1
2
1
2
1
2
1
S52
2
1
S53
2
1
S54
2
S8
OPEN
OPEN
OPEN
OPEN
911
5
-
1
+
6
7
­+
8
DUT
2
­+
1
4
­+
3
13
14
15
2
16
12
3
4
10
S14
OPEN
15pF
2
1
V6
V7
V8
V9
ACOUT
1
S11
2
2K
NOTES:
1. For loop stability, use Min value capacitor to prevent oscillation.
2. Includes stray capacitance.
3. All capacitors = ±10% (µF).
4. All resistors = ±1% ().
5. DUT pin numbers refer to 14 pin CERDIP Package.
47pF1µF
V3
1 50pF (NOTE 2)
V1
-1
10
500K
S9
­+
50K
2 V4
(NOTE 1)
-1
FB
-
10
+
E
X2
OUT
2
Loading...
+ 3 hidden pages