Intersil Corporation HS-139RH Datasheet
HS-139RH
Data Sheet May 1999
Radiation Hardened Quad Voltage
Comparator
The Radiation Hardened HS-139RH consists of four
independent single or dual supply voltage comparators on a
single monolithicsubstrate.The commonmode inputvoltage
range includes ground, even when operated from a single
supply, and the lowsupply current makes these comparators
suitable for low power applications. These types were
designed to directly interface with TTL and CMOS.
The HS-139RH is fabricated on our dielectrically isolated
Rad Hard Silicon Gate (RSG) process, which provides an
immunity to Single Event Latch-up and the capability of
highly reliable performance in any radiation environment.
Specifications for Rad Hard QML devices are controlled
by the Defense Supply Center in Columbus (DSCC). The
SMD numbers listed below must be used when ordering.
Detailed Electrical Specifications for the HS-139RH are
contained in SMD 5962-98613. A “hot-link” is provided
on our homepage with instructions for downloading.
www.intersil.com/spacedefense/ne wsafc lasst.asp
File Number 3573.2
Features
• QML Qualified Per MIL-PRF-38535 Requirements
• Radiation Environment
- Latch-up Free Under any Conditions
- Total Dose (Max). . . . . . . . . . . . . . . . . . 3 x 10
- SEU LET Threshold . . . . . . . . . . . . . . . 20MeV/cm
5
RAD(Si)
2
/mg
- Low Dose Rate Effects Immunity
• 100V Output Voltage Withstand Capability
• ESD Protection to >3000V
• Differential Input Voltage Range Equal to the Supply
Voltage
• Input Offset Voltage (V
). . . . . . . . . . . . . . . . . 2mV (Max)
IO
• Quiescent Supply Current . . . . . . . . . . . . . . . . 2mA (Max)
Applications
• Pulse Generators
• Timing Circuitry
• Level Shifting
Ordering Information
ORDERING
NUMBER
5962F9861301VCC HS1-139RH-Q -55 to 125
5962F9861301QCC HS1-139RH-8 -55 to 125
HS1-139RH/Proto HS1-139RH/Proto -55 to 125
5962F9861301VXC HS9-139RH-Q -55 to 125
5962F9861301QXC HS9-139RH-8 -55 to 125
HS9-139RH/Proto HS9-139RH/Proto -55 to 125
INTERNAL
MKT. NUMBER TEMP. RANGE (oC)
• Analog to Digital Conversion
Pinouts
s
OUT 1
V+
- IN 1
+ IN 1
- IN 2
- IN 2
HS-139RH (SBDIP CDIP2-T14)
TOP VIEW
OUT 2
1
2
OUT 1
3
V+
4
- IN 1
5
+ IN 1
6
- IN 2
7
+ IN 2
HS-139RH (FLATPACK CDFP3-F14)
TOP VIEW
1OUT 2
2
3
4
5
6
7
14
OUT 3
13
OUT 4
12
GND
11
+ IN 4
10
- IN 4
9
+ IN 3
8
- IN 3
14
13
12
11
10
9
8
OUT 3
OUT 4
GND
+ IN 4
- IN 4
+ IN 3
- IN 3
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
Die Characteristics
HS-139RH
DIE DIMENSIONS:
3750µm x 2820µm (148 mils x 111 mils)
483µm ± 25.4µm (19 mils ± 1 mil)
INTERFACE MATERIALS:
Glassivation:
Type: Silox (SiO
)
2
Thickness: 8.0kÅ ± 1.0kÅ
Top Metallization:
Type: AlSiCu
Thickness: 16.0kÅ ± 2kÅ
Substrate:
Radiation Hardened Silicon Gate, Dielectric Isolation
Metallization Mask Layout
OUT4
(13)
Backside Finish:
Silicon
ASSEMBLY RELATED INFORMATION:
Substrate Potential:
Unbiased (DI)
ADDITIONAL INFORMATION:
Worst Case Current Density:
<2.0 x 10
5
Transistor Count:
49
HS-139RH
GND +IN4 -IN4
(12) (11) (10)
A/cm
2
OUT3
(14)
OUT2
(1)
OUT1
(2)
+IN3
(9)
-IN3
(8)
+IN2
(7)
-IN2
(6)
V+ -IN1 +IN1
(5)(4)(3)
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However,no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site www.intersil.com
2
Loading...