Intersil Corporation HCTS157MS Datasheet
August 1995
HCTS157MS
Radiation Hardened
Quad 2-Input Multiplexers
Features
• 3 Micron Radiation Hardened CMOS SOS
• Total Dose 200K RAD (Si)
2
• SEP Effective LET No Upsets: >100 MEV-cm
• Single Event Upset (SEU) Immunity < 2 x 10
/mg
-9
Errors/
Bit-Day (Typ)
• Dose Rate Survivability: >1 x 10
10
• Dose Rate Upset >10
RAD (Si)/s 20ns Pulse
12
RAD (Si)/s
• Latch-Up Free Under Any Conditions
• Fanout (Over Temperature Range)
- Standard Outputs 10 LSTTL Loads
• Military Temperature Range: -55
o
C to +125oC
• Significant Power Reduction Compared to LSTTL ICs
• DC Operating Voltage Range: 4.5V to 5.5V
• LSTTL Input Compatibility
- VIL = 0.8V Max
- VIH = VCC/2 Min
• Input Current Levels Ii ≤ 5µA at VOL, VOH
Description
The Intersil HCTS157MS is a Radiation Hardened quad
2-input multiplexers with select and enable inputs.
The HCTS157MS utilizes advanced CMOS/SOS technology
to achieve high-speed operation. This device is a member of
radiation hardened, high-speed, CMOS/SOS Logic Family.
Pinouts
S
1I0
1I1
1Y
2I0
2I1
2Y
GND
16 LEAD CERAMIC DUAL-IN-LINE
METAL SEAL PACKAGE (SBDIP)
MIL-STD-1835 CDIP2-T16
TOP VIEW
16
1
S
2
1I0
3
1I1
4
1Y
5
2I0
6
2I1
7
2Y
8
GND
16 LEAD CERAMIC METAL SEAL
FLATPACK PACKAGE (FLATPACK)
MIL-STD-1835 CDFP4-F16
TOP VIEW
116
2
3
4
5
6
7
8
VCC
15
E
14
4I0
13
4I1
12
4Y
3I0
11
10
3I1
3Y
9
15
14
13
12
11
10
9
VCC
E
4I0
4I1
4Y
3I0
3I1
3Y
The HCTS157MS is supplied in a 16 lead Ceramic flatpack
(K suffix) or a SBDIP Package (D suffix).
Ordering Information
PART NUMBER TEMPERATURE RANGE SCREENING LEVEL PACKAGE
HCTS157DMSR -55oC to +125oC Intersil Class S Equivalent 16 Lead SBDIP
HCTS157KMSR -55oC to +125oC Intersil Class S Equivalent 16 Lead Ceramic Flatpack
HCTS157D/Sample +25oC Sample 16 Lead SBDIP
HCTS157K/Sample +25oC Sample 16 Lead Ceramic Flatpack
HCTS157HMSR +25oC Die Die
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207
| Copyright © Intersil Corporation 1999
550
Spec Number
File Number 2464.2
DB NA
518610
Functional Block Diagram
1
S
15
E
13
4I1
14
4I0
10
3I1
11
3I0
6
2I1
5
2I0
3
1I1
2
1I0
HCTS157MS
3 CIRCUITS IDENTICAL TO CIRCUIT
IN ABOVE DASHED OUTLINE
12
4Y
9
3Y
7
2Y
4
1Y
ENABLE
E S I0 I1 Y
HXXXL
LLLXL
LLHXH
LHXLL
LHXHH
H = High Level
L = Low Level
X = Immaterial
TRUTH TABLE
SELECT
INPUTS DATA INPUTS OUTPUT
551
Spec Number 518610
Specifications HCTS157MS
Absolute Maximum Ratings Reliability Information
Supply Voltage (VCC). . . . . . . . . . . . . . . . . . . . . . . . .-0.5V to +7.0V
Input Voltage Range, All Inputs . . . . . . . . . . . . .-0.5V to VCC +0.5V
DC Input Current, Any One Input . . . . . . . . . . . . . . . . . . . . . . . .±10mA
DC Drain Current, Any One Output. . . . . . . . . . . . . . . . . . . . . . .±25mA
(All Voltage Reference to the VSS Terminal)
Storage Temperature Range (TSTG) . . . . . . . . . . . -65oC to +150oC
Lead Temperature (Soldering 10sec) . . . . . . . . . . . . . . . . . . +265oC
Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
CAUTION: As with all semiconductors, stress listed under “Absolute Maximum Ratings” may be applied to devices (one at a time) without resulting in permanent
damage. This is a stress rating only. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. The conditions listed
under “Electrical Performance Characteristics” are the only conditions recommended for satisfactory device operation.
Operating Conditions
Supply Voltage (VCC). . . . . . . . . . . . . . . . . . . . . . . . +4.5V to +5.5V
Input Rise and Fall Times at 4.5V VCC (TR, TF). . . . . . .500ns Max
Operating Temperature Range (TA) . . . . . . . . . . . . -55oC to +125oC
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS
Thermal Resistance θ
SBDIP Package. . . . . . . . . . . . . . . . . . . . 73oC/W 24oC/W
Ceramic Flatpack Package . . . . . . . . . . . 114oC/W 29oC/W
Maximum Package Power Dissipation at +125oC Ambient
SBDIP Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.68W
Ceramic Flatpack Package . . . . . . . . . . . . . . . . . . . . . . . . . 0.44W
If device power exceeds package dissipation capability, provide heat
sinking or derate linearly at the following rate:
SBDIP Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13.7mW/oC
Ceramic Flatpack Package . . . . . . . . . . . . . . . . . . . . . .8.8mW/oC
Input Low Voltage (VIL). . . . . . . . . . . . . . . . . . . . . . . . . 0.0V to 0.8V
Input High Voltage (VIH). . . . . . . . . . . . . . . . . . . . . . .VCC/2 to VCC
JA
θ
JC
(NOTE 1)
PARAMETER SYMBOL
Quiescent Current ICC VCC = 5.5V,
Output Current
(Sink)
Output Current
(Source)
Output Voltage Low VOL VCC = 4.5V, VIH = 2.25V,
Output Voltage High VOH VCC = 4.5V, VIH = 2.25V,
Input Leakage
Current
IOL VCC = 4.5V, VIH = 4.5V,
IOH VCC = 4.5V, VIH = 4.5V,
IIN VCC = 5.5V, VIN = VCC or
CONDITIONS
VIN = VCC or GND
VOUT = 0.4V, VIL = 0V
VOUT = VCC - 0.4V,
VIL = 0V
IOL = 50µA, VIL = 0.8V
VCC = 5.5V, VIH = 2.75V,
IOL = 50µA, VIL = 0.8V
IOH = -50µA, VIL = 0.8V
VCC = 5.5V, VIH = 2.75V,
IOH = -50µA, VIL = 0.8V
GND
GROUP
A SUB-
GROUPS TEMPERATURE
1 +25oC-40µA
2, 3 +125oC, -55oC - 750 µA
1 +25oC 7.2 - mA
2, 3 +125oC, -55oC 6.0 - mA
1 +25oC -7.2 - mA
2, 3 +125oC, -55oC -6.0 - mA
1, 2, 3 +25oC, +125oC, -55oC - 0.1 V
1, 2, 3 +25oC, +125oC, -55oC - 0.1 V
1, 2, 3 +25oC, +125oC, -55oC VCC
1, 2, 3 +25oC, +125oC, -55oC VCC
1 +25oC-±0.5 µA
2, 3 +125oC, -55oC-±5.0 µA
LIMITS
-V
-0.1
-V
-0.1
UNITSMIN MAX
Noise Immunity
Functional Test
NOTES:
1. All voltages referenced to device GND.
2. For functional tests, VO ≥ 4.0V is recognized as a logic “1”, and VO ≤ 0.5V is recognized as a logic “0”.
FN VCC = 4.5V, VIH = 2.25V,
VIL = 0.8V (Note 2)
7, 8A, 8B +25oC, +125oC, -55oC---
552
Spec Number 518610
Loading...