Intersil Corporation FSF450R, FSF450D Datasheet

June 1998

FSF450D, FSF450R

9A, 500V, 0.600 Ohm, Rad Hard,

SEGR Resistant, N-Channel Power MOSFETs

Features

• 9A, 500V, r

• Total Dose

- Meets Pre-RAD Specifications to 100K RAD (Si)

• Single Event

- Safe Operating Area Curve for Single Event Effects

- SEE Immunity for LET of 36MeV/mg/cm
V

up to 80% of Rated Breakdown and

DS

V

of 10V Off-Bias

GS

• Dose Rate

- Typically Survives 3E9 RAD (Si)/s at 80% BV

- Typically Survives 2E12 if Current Limited to I

• Photo Current

- 30nA Per-RAD(Si)/s Typically

• Neutron

- Maintain Pre-RAD Specifications
for 3E12 Neutrons/cm

- Usable to 3E13 Neutrons/cm

DS(ON)

= 0.600Ω

2

2

with

DSS

DM

2

Ordering Information

RAD LEVEL SCREENING LEVEL PART NUMBER/BRAND

10K Commercial FSF450D1
10K TXV FSF450D3
100K Commercial FSF450R1
100K TXV FSF450R3
100K Space FSF450R4

Description

The Discrete Products Operation of Intersil Corporation has
developed a series of Radiation Hardened MOSFETs specif­ically designed for commercial and military space applica­tions. Enhanced Power MOSFET immunity to Single Event
Effects (SEE), Single Event Gate Rupture (SEGR) in particu­lar, is combined with 100K RADS of total dose hardness to
provide devices which are ideally suited to harsh space envi­ronments. The dose rate and neutron tolerance necessary
for military applications have not been sacrificed.

The Intersil portfolio of SEGR resistant radiation hardened
MOSFETs includes N-Channel and P-Channel devices in a
variety of voltage, current and on-resistance ratings.
umerous packaging options are also available.

This MOSFET is an enhancement-mode silicon-gate power
field-effect transistor of the vertical DMOS (VDMOS) struc­ture. It is specially designed and processed to be radiation
tolerant. The MOSFET is well suited for applications
exposed to radiation environments such as switching regula­tion, switching converters, motor drives, relay drivers and
drivers for high-power bipolar switching transistors requiring
high speed and low gate drive power. This type can be
operated directly from integrated circuits.

Reliability screening is available as either commercial, TXV
equivalent of MIL-S-19500, or Space equivalent of
MIL-S-19500. Contact Intersil for any desired deviations
from the data sheet.

Symbol

D

G

Formerly available as type TA17659.

Package

TO-254AA

G

S

D

CAUTION: Beryllia Warning per MIL-S-19500

refer to package specifications.

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207

| Copyright © Intersil Corporation 1999

3-119

S

File Number 3970.3

FSF450D, FSF450R

Absolute Maximum Ratings T

= 25oC, Unless Otherwise Specified

C

FSF450D, FSF450R UNITS

Drain to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V

Drain to Gate Voltage (RGS = 20kΩ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V

DS

DGR

500 V
500 V

Continuous Drain Current

TC = 25oC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I

TC = 100oC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I

Pulsed Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I

Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V

D
D

DM

GS

9A
6A

27 A

±20 V

Maximum Power Dissipation

TC = 25oC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P

TC = 100oC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P

T
T

125 W

50 W

Linear Derating Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.00 W/oC

Single Pulsed Avalanche Current, L = 100µH, (See Test Figure). . . . . . . . . . . . . . . . . . . . . . I

Continuous Source Current (Body Diode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I

Pulsed Source Current (Body Diode). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I

Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TJ, T

STG

Lead Temperature (During Soldering) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T

AS

S

SM

L

27 A

9A

27 A

-55 to 150
300

o

C

o

C

(Distance >0.063in (1.6mm) from Case, 10s Max)

CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

Electrical Specifications T

= 25oC, Unless Otherwise Specified

C

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS

Drain to Source Breakdown Voltage BV
Gate Threshold Voltage V

DSSID

GS(TH)VGS

= 1mA, VGS = 0V 500 - - V

= VDS,

ID = 1mA

TC = -55oC - - 5.0 V
TC = 25oC 1.5 - 4.0 V
TC = 125oC 0.5 - - V

Zero Gate Voltage Drain Current I

Gate to Source Leakage Current I

DSS

GSS

VDS = 400V,
VGS = 0V

TC = 25oC--25µA
TC = 125oC - - 250 µA

VGS = ±20V TC = 25oC - - 100 nA

TC = 125oC 200 nA
Drain to Source On-State Voltage V
Drain to Source On Resistance r

Turn-On Delay Time t

DS(ON)VGS

DS(ON)12ID

d(ON)

Rise Time t
Turn-Off Delay Time t

d(OFF)

Fall Time t
Total Gate Charge Q

g(TOT)VGS

Gate Charge at 12V Q
Threshold Gate Charge Q
Gate Charge Source Q
Gate Charge Drain Q
Plateau Voltage V

(PLATEAU)ID

Input Capacitance C
Output Capacitance C
Reverse Transfer Capacitance C
Thermal Resistance Junction to Case R
Thermal Resistance Junction to Ambient R

r

f

g(12)

g(TH)

gs

gd

ISS
OSS
RSS

JC

θ

JA

θ

= 12V, ID = 9A 5.67 V

=6A,

VGS = 12V

VDD = 250V, ID =9A,
RL = 27.8Ω, VGS = 12V,
RGS = 2.35Ω

TC = 25oC - 0.425 0.600 Ω
TC = 125oC - - 1.20 Ω

- - 150 ns

- - 140 ns

- - 180 ns

- - 70 ns

= 0V to 20V VDD = 250V,

VGS = 0V to 12V - 110 150 nC

ID =9A

- - 220 nC

VGS = 0V to 2V - - 8.2 nC

-2128nC

-4962nC

= 9A, VDS = 15V - 7 - V

VDS = 25V, VGS = 0V,
f = 1MHz

- 3150 - pF

- 540 - pF

- 150 - pF

- - 1.00

o

C/W

--48oC/W

3-120

Source to Drain Diode Specifications

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS

FSF450D, FSF450R

Forward Voltage V
Reverse Recovery Time t

SD

rr

Electrical Specifications up to 100K RAD T

ISD = 9A 0.6 - 1.8 V
ISD = 9A, dISD/dt = 100A/µs - - 810 ns

= 25oC, Unless Otherwise Specified

C

PARAMETER SYMBOL TEST CONDITIONS MIN MAX UNITS

Drain to Source Breakdown Volts (Note 3) BV
Gate to Source Threshold Volts (Note 3) V
Gate to Body Leakage (Notes 2, 3) I
Zero Gate Leakage (Note 3) I
Drain to Source On-State Volts (Notes 1, 3) V
Drain to Source On Resistance (Notes 1, 3) r

DS(ON)

DS(ON)12VGS

DSS

GS(TH)

GSS
DSS

VGS = 0, ID = 1mA 500 - V
VGS = VDS, ID = 1mA 1.5 4.0 V
VGS = ±20V, VDS = 0V - 100 nA
VGS = 0, VDS = 400V - 25 µA
VGS = 12V, ID = 9A - 5.67 V

= 12V, ID = 6A - 0.600 Ω

NOTES:

1. Pulse test, 300µs Max.

2. Absolute value.

3. Insitu Gamma bias must be sampled for both VGS = 12V, VDS = 0V and VGS = 0V, VDS = 80% BV

DSS

.

Single Event Effects (SEB, SEGR) Note 4

ENVIRONMENT (NOTE 5)

APPLIED

VGS BIAS

TEST SYMBOL

Single Event Effects Safe Operating
Area

ION

SPECIES

SEESOA Ni 26 43 -15 500

Ni 26 43 -20 450

TYPICAL LET
(MeV/mg/cm)

TYPICAL

RANGE (µ)

Br 37 36 -5 500
Br 37 36 -10 400
Br 37 36 -15 100

NOTES:

4. Testing conducted at Brookhaven National Labs; sponsored by Naval Surface Warfare Center (NSWC), Crane, IN.

5. Fluence = 1E5 ions/cm2 (typical), T = 25oC.

6. Does not exhibit Single Event Burnout (SEB) or Single Event Gate Rupture (SEGR).

(V)

(NOTE 6)

MAXIMUM

VDS BIAS

(V)

Typical Performance Curves

LET = 26MeV/mg/cm

600

500

400

(V)

300

DS

V

200

100

TEMP = 25oC

0

0 -10 -15 -20 -25

LET = 37MeV/mg/cm2, RANGE = 36µ

FLUENCE = 1E5 IONS/cm2 (TYPICAL)

-5
(V)

V

GS

Unless Otherwise Specified

2

, RANGE = 43µ

LIMITING INDUCTANCE (HENRY)

1E-3

1E-4

1E-5

1E-6

1E-7

30

DRAIN SUPPLY (V)

ILM = 10A

30A

100A

300A

30010010

FIGURE 1. SINGLE EVENT EFFECTS SAFE OPERATING AREA FIGURE 2. DRAIN INDUCTANCE REQUIRED TO LIMIT

GAMMA DOT CURRENT TO I

AS

3-121

1000