Intersil Corporation CD54ACT245F3A, CD54AC245F3A Datasheet

SEMICONDUCTOR

CD54AC245/3A

CD54ACT245/3A

COMPLETE DATA SHEET

June 1997

Description

The CD54AC245/3A and CD54ACT245/3A are octal-bus
transceivers that utilize the Harris Advanced CMOS Logic
technology. They are non-inverting three-state bidirectional
tranceiver-buffers intended for two-way transmission from
“A” bus to “B” bus or “B” bus to “A” bus. The logic level
present on the direction input (DIR) determines the data
direction. When the output enable input (
outputs are in the high-impedance state.)

The CD54AC245/3A and CD54ACT245/3A are supplied in
20 lead dual-in-line ceramic packages (F suffix).

ACT INPUT LOAD TABLE

INPUT UNIT LOAD (NOTE 1)

An, Bn 0.83

OE 0.64

DIR 0.15

NOTE:

1. Unit load is ∆ICC limit specified in DC Electrical Specifications
Table, e.g., 2.4mA Max at +25oC.

COMING SOON!

OE) is HIGH, the

Octal-Bus Transceiver

Three-State, Non-Inverting

Functional Diagram

A0

A1

A2

A3

A4

A5

A6

A7

DIR

OE

2

3

4

5

6

7

8

9

1

18

B0

17

B1

16

B2

15

B3

14

B4

13

B5

12

B6

11

B7

19

Absolute Maximum Ratings

DC Supply Voltage, VCC. . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +6V

DC Input Diode Current, I

For VI < -0.5V or VI > VCC + 0.5V . . . . . . . . . . . . . . . . . . . . . .±20mA

DC Output Diode Current, I

For VO < -0.5V or VO > VCC + 0.5V. . . . . . . . . . . . . . . . . . . . .±50mA

DC Output Source or Sink Current, Per Output Pin, I

For VO > -0.5V or VO < VCC + 0.5V. . . . . . . . . . . . . . . . . . . . .±50mA

DC VCC or GND Current, ICC or I

For Up to 4 Outputs Per Device, Add ±25mA For Each

Additional Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±100mA

CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

IK

OK

O

GND

Power Dissipation Per Package, P

TA = -55oC to +100oC (Package F) . . . . . . . . . . . . . . . . . . 500mW

TA = +100oC to +125oC (Package F) . . . . . . . . Derate Linearly at

Operating Temperature Range, T

Package Type F. . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to +125oC

Storage Temperature, T
Lead Temperature (During Soldering)

At Distance 1/16in. ± 1/32in. (1.59mm ± 0.79mm)

From Case For 10s Max . . . . . . . . . . . . . . . . . . . . . . . . . . +265oC

Unit Inserted Into a PC Board (Min Thickness 1/16in., 1.59mm)

With Solder Contacting Lead Tips Only. . . . . . . . . . . . . . . +300oC

STG

D

8mW/oC to 300mW

A

. . . . . . . . . . . . . . . . . .-65oC to +150oC

Recommended Operating Conditions

Supply Voltage Range, V

Unless Otherwise Specified, All Voltages Referenced to GND
TA = Full Package Temperature Range

CD54AC Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5V to 5.5V

CD54ACT Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.5V to 5.5V

DC Input or Output Voltage, VI, VO. . . . . . . . . . . . . . . . . . 0V to V

CC

Operating Temperature, TA . . . . . . . . . . . . . . . . . . .-55oC to +125oC

Input Rise and Fall Slew Rate, dt/dv

at 1.5V to 3V (AC Types) . . . . . . . . . . . . . . . . . . . 0ns/V to 50ns/V

at 3.6V to 5.5V (AC Types) . . . . . . . . . . . . . . . . . 0ns/V to 20ns/V

at 4.5V to 5.5V (AC Types) . . . . . . . . . . . . . . . . . 0ns/V to 10ns/V

CC

CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper I.C. Handling Procedures.
Copyright

© Harris Corporation 1994

1

File Number

3901