Intersil Corporation CD54ACT164F3A, CD54AC164F3A Datasheet
SEMICONDUCTOR
COMPLETE DATA SHEET
CD54AC164/3A
CD54ACT164/3A
June 1997
COMING SOON!
Description
The CD54AC164/3A and CD54ACT164/3A are 8-bit serialin/parallel-out shift registers with asynchronous reset that
utilize the Harris Advanced CMOS Logic technology. Data
are shifted on the positive edge of the clock (CP). A LOW on
the Master Reset (
outputs go to the LOW state regardless of the input conditions. Two Serial Data inputs (DS1 and DS2) are provided;
either one can be used as a Data Enable control.
The CD54AC164/3A and CD54ACT164/3A are supplied in
14 lead dual-in-line ceramic packages (F suffix).
DS1, DS2 0.5
NOTE:
1. Unit load is ∆ICC limit specified in DC Electrical Specifications
Table, e.g., 2.4mA Max at +25oC.
MR) pin resets the shift register and all
ACT INPUT LOAD TABLE
INPUT UNIT LOAD (NOTE 1)
MR 0.74
CP 0.71
8-Bit Serial-In/Parallel-Out Shift Registers
Functional Diagram
3
DS1
DS2
MR
CP
1
2
98
4
5
6
10
11
12
13
GND = 7
V
= 14
CC
Q0
Q1
Q2
Q3
Q4
Q5
Q6
Q7
Absolute Maximum Ratings
DC Supply Voltage, VCC. . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +6V
DC Input Diode Current, I
For VI < -0.5V or VI > VCC + 0.5V . . . . . . . . . . . . . . . . . . . . . .±20mA
DC Output Diode Current, I
For VO < -0.5V or VO > VCC + 0.5V. . . . . . . . . . . . . . . . . . . . .±50mA
DC Output Source or Sink Current, Per Output Pin, I
For VO > -0.5V or VO < VCC + 0.5V. . . . . . . . . . . . . . . . . . . . .±50mA
DC VCC or GND Current, ICC or I
For Up to 4 Outputs Per Device, Add ±25mA For Each
Additional Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±100mA
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
IK
OK
O
GND
Power Dissipation Per Package, P
TA = -55oC to +100oC (Package F) . . . . . . . . . . . . . . . . . . 500mW
TA = +100oC to +125oC (Package F) . . . . . . . . Derate Linearly at
Operating Temperature Range, T
Package Type F. . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to +125oC
Storage Temperature, T
Lead Temperature (During Soldering)
At Distance 1/16in. ± 1/32in. (1.59mm ± 0.79mm)
From Case For 10s Max . . . . . . . . . . . . . . . . . . . . . . . . . . +265oC
Unit Inserted Into a PC Board (Min Thickness 1/16in., 1.59mm)
With Solder Contacting Lead Tips Only. . . . . . . . . . . . . . . +300oC
STG
D
8mW/oC to 300mW
A
. . . . . . . . . . . . . . . . . .-65oC to +150oC
Recommended Operating Conditions
Supply Voltage Range, V
Unless Otherwise Specified, All Voltages Referenced to GND
TA = Full Package Temperature Range
CD54AC Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5V to 5.5V
CD54ACT Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.5V to 5.5V
DC Input or Output Voltage, VI, VO. . . . . . . . . . . . . . . . . . 0V to V
CC
Operating Temperature, TA . . . . . . . . . . . . . . . . . . .-55oC to +125oC
Input Rise and Fall Slew Rate, dt/dv
at 1.5V to 3V (AC Types) . . . . . . . . . . . . . . . . . . . 0ns/V to 50ns/V
at 3.6V to 5.5V (AC Types) . . . . . . . . . . . . . . . . . 0ns/V to 20ns/V
at 4.5V to 5.5V (AC Types) . . . . . . . . . . . . . . . . . 0ns/V to 10ns/V
CC
CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper I.C. Handling Procedures.
Copyright
© Harris Corporation 1994
1
File Number
3894
Loading...