Intersil Corporation CD54AC280F3A Datasheet

SEMICONDUCTOR

COMPLETE DATA SHEET

CD54AC280/3A

CD54ACT280/3A

June 1997

COMING SOON!

Description

The CD54AC280/3A and CD54ACT280/3A are 9-bit odd/
even parity generator/checkers that utilize the Harris
Advanced CMOS Logic technology. Both even and odd par­ity outputs are available for checking or generating parity
words up to nine bits long. Even parity is indicated (∑E out­put is HIGH) when an even number of data inputs is HIGH.
Odd parity is indicated (∑O output is HIGH) when an odd
number of data inputs is HIGH. Parity checking for words
larger than nine bits can be accomplished by tying the ∑E
output to any output of an additional AC/ACT280 parity
checker.

The CD54AC280/3A and CD54ACT280/3A are supplied in
14 lead dual-in-line ceramic packages (F suffix).

ACT INPUT LOAD TABLE

INPUT UNIT LOAD (NOTE 1)

All 1.43

NOTE:

1. Unit load is ∆ICC limit specified in DC Electrical Specifications
Table, e.g., 2.4mA Max at +25oC.

9-Bit Odd/Even Parity Generator/Checker

Functional Diagram

8

I0

9

I1

10

I2

11

I3

12

I4

13

I5

1

I6

2

I7

4

I8

5

∑ EVEN

6

∑ ODD

GND = 7
V

= 14

CC

NC = 3

Absolute Maximum Ratings

DC Supply Voltage, VCC. . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +6V

DC Input Diode Current, I

For VI < -0.5V or VI > VCC + 0.5V . . . . . . . . . . . . . . . . . . . . . .±20mA

DC Output Diode Current, I

For VO < -0.5V or VO > VCC + 0.5V. . . . . . . . . . . . . . . . . . . . .±50mA

DC Output Source or Sink Current, Per Output Pin, I

For VO > -0.5V or VO < VCC + 0.5V. . . . . . . . . . . . . . . . . . . . .±50mA

DC VCC or GND Current, ICC or I

For Up to 4 Outputs Per Device, Add ±25mA For Each

Additional Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±100mA

CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

IK

OK

O

GND

Power Dissipation Per Package, P

TA = -55oC to +100oC (Package F) . . . . . . . . . . . . . . . . . . 500mW

TA = +100oC to +125oC (Package F) . . . . . . . . Derate Linearly at

Operating Temperature Range, T

Package Type F. . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to +125oC

Storage Temperature, T
Lead Temperature (During Soldering)

At Distance 1/16in. ± 1/32in. (1.59mm ± 0.79mm)

From Case For 10s Max . . . . . . . . . . . . . . . . . . . . . . . . . . +265oC

Unit Inserted Into a PC Board (Min Thickness 1/16in., 1.59mm)

With Solder Contacting Lead Tips Only. . . . . . . . . . . . . . . +300oC

STG

D

8mW/oC to 300mW

A

. . . . . . . . . . . . . . . . . .-65oC to +150oC

Recommended Operating Conditions

Supply Voltage Range, V

Unless Otherwise Specified, All Voltages Referenced to GND
TA = Full Package Temperature Range

CD54AC Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5V to 5.5V

CD54ACT Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.5V to 5.5V

DC Input or Output Voltage, VI, VO. . . . . . . . . . . . . . . . . . 0V to V

CC

Operating Temperature, TA . . . . . . . . . . . . . . . . . . .-55oC to +125oC

Input Rise and Fall Slew Rate, dt/dv

at 1.5V to 3V (AC Types) . . . . . . . . . . . . . . . . . . . 0ns/V to 50ns/V

at 3.6V to 5.5V (AC Types) . . . . . . . . . . . . . . . . . 0ns/V to 20ns/V

at 4.5V to 5.5V (AC Types) . . . . . . . . . . . . . . . . . 0ns/V to 10ns/V

CC

CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper I.C. Handling Procedures.
Copyright

© Harris Corporation 1994

1

File Number

3905