Intersil Corporation CD4099BMS Datasheet

CD4099BMS

December 1992

Features

• High Voltage Type (20V Rating)

• Serial Data Input

• Active Parallel Output

• Storage Register Capability

• Master Clear

• Can Function as Demultiplexer

• 100% Tested for Quiescent Current at 20V

• 5V, 10V and 15V Parametric Ratings

• Standardized Symmetrical Output Characteristics

• Maximum Input Current of 1µA at 18V Over Full Pack-

age Temperature Range; 100nA at 18V and +25

• Noise Margin (Over Full Package/Temperature Range)

- 1V at VDD = 5V

- 2V at VDD = 10V

- 2.5V at VDD = 15V

• Meets All Requirements of JEDEC Tentative Standard No. 13B, “Standard Speciﬁcations for Description of ‘B’ Series CMOS Devices”

Applications

• Multi-Line Decoders

• A/D Converters

Description

CD4099BMS 8-bit addressable latch is a serial input, parallel output storage register that can perform a variety of functions.

Data are inputted to a particular bit in the latch when that bit is addressed (by means of inputs A0, A1, A2) and when WRITE DISABLE is at a low level. When WRITE DISABLE is high, data entry is inhibited; however, all 8 outputs can be continuously read independent of WRITE DISABLE and address inputs.

CMOS 8-Bit Addressable Latch

Pinout

CD4099BMS

TOP VIEW

VDD

RESET

WRITE DISABLE

DATA

A0 A1 A2

VSS

2 3 4 5 6 7 8

Functional Diagram

WRITE DISABLE

DATA

DECODER

RESET

VDD = 16 VSS = 8

4 3

16 15 14 13 12 11 10

8 LATCHES

Q6 Q5 Q4 Q3 Q2 Q1 Q0

A master RESET input is available, which resets all bits to a logic “0” level when RESET and WRITE DISABLE are at a high level. When RESET is at a high level, and WRITE DISABLE is at a low level, the latch acts as a 1 of 8 demultiplexer; the bit that is addressed has an active output which follows the data input, while all unaddressed bits are held to a logic “0” level.

The CD4099BMS is supplied in these 16-lead outline packages: Braze Seal DIP H4X

Frit Seal DIP H1F Ceramic Flatpack H6W

7-494

File Number

3333

Speciﬁcations CD4099BMS

Absolute Maximum Ratings Reliability Information

DC Supply Voltage Range, (VDD) . . . . . . . . . . . . . . . -0.5V to +20V

(Voltage Referenced to VSS Terminals)

Input Voltage Range, All Inputs . . . . . . . . . . . . .-0.5V to VDD +0.5V

DC Input Current, Any One Input . . . . . . . . . . . . . . . . . . . . . . . .±10mA

Operating Temperature Range. . . . . . . . . . . . . . . . -55

Package Types D, F, K, H

Storage Temperature Range (TSTG) . . . . . . . . . . . -65

C to +125oC

C to +150oC

Lead Temperature (During Soldering) . . . . . . . . . . . . . . . . . +265

At Distance 1/16 ± 1/32 Inch (1.59mm ± 0.79mm) from case for

10s Maximum

TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS

PARAMETER SYMBOL CONDITIONS (NOTE 1)

Supply Current IDD VDD = 20V, VIN = VDD or GND 1 +25

VDD = 18V, VIN = VDD or GND 3 -55oC-10µA

Input Leakage Current IIL VIN = VDD or GND VDD = 20 1 +25

VDD = 18V 3 -55oC -100 - nA

Input Leakage Current IIH VIN = VDD or GND VDD = 20 1 +25oC - 100 nA

VDD = 18V 3 -55oC - 100 nA Output Voltage VOL15 VDD = 15V, No Load 1, 2, 3 +25oC, +125oC, -55oC - 50 mV Output Voltage VOH15 VDD = 15V, No Load (Note 3) 1, 2, 3 +25oC, +125oC, -55oC 14.95 - V Output Current (Sink) IOL5 VDD = 5V, VOUT = 0.4V 1 +25oC 0.53 - mA Output Current (Sink) IOL10 VDD = 10V, VOUT = 0.5V 1 +25oC 1.4 - mA Output Current (Sink) IOL15 VDD = 15V, VOUT = 1.5V 1 +25oC 3.5 - mA Output Current (Source) IOH5A VDD = 5V, VOUT = 4.6V 1 +25oC - -0.53 mA Output Current (Source) IOH5B VDD = 5V, VOUT = 2.5V 1 +25oC - -1.8 mA Output Current (Source) IOH10 VDD = 10V, VOUT = 9.5V 1 +25oC - -1.4 mA Output Current (Source) IOH15 VDD = 15V, VOUT = 13.5V 1 +25oC - -3.5 mA N Threshold Voltage VNTH VDD = 10V, ISS = -10µA 1 +25oC -2.8 -0.7 V P Threshold Voltage VPTH VSS = 0V, IDD = 10µA 1 +25oC 0.7 2.8 V Functional F VDD = 2.8V, VIN = VDD or GND 7 +25oC VOH >

VDD = 20V, VIN = VDD or GND 7 +25oC VDD = 18V, VIN = VDD or GND 8A +125oC VDD = 3V, VIN = VDD or GND 8B -55oC

Input Voltage Low

VIL VDD = 5V, VOH > 4.5V, VOL < 0.5V 1, 2, 3 +25oC, +125oC, -55oC - 1.5 V

(Note 2) Input Voltage High

VIH VDD = 5V, VOH > 4.5V, VOL < 0.5V 1, 2, 3 +25oC, +125oC, -55oC 3.5 - V

(Note 2) Input Voltage Low

(Note 2) Input Voltage High

(Note 2)

VIL VDD = 15V, VOH > 13.5V,

VOL < 1.5V

VIH VDD = 15V, VOH > 13.5V,

VOL < 1.5V

NOTES: 1. All voltages referenced to device GND, 100% testing being

implemented.

2. Go/No Go test with limits applied to inputs.

Thermal Resistance . . . . . . . . . . . . . . . . θ

Ceramic DIP and FRIT Package. . . . . 80oC/W 20oC/W

Flatpack Package . . . . . . . . . . . . . . . . 70

Maximum Package Power Dissipation (PD) at +125oC

For TA = -55 For TA = +100

Device Dissipation per Output Transistor . . . . . . . . . . . . . . . 100mW

C to +100oC (Package Type D, F, K). . . . . . 500mW

C to +125oC (Package Type D, F, K) . . . . .Derate

Linearity at 12mW/oC to 200mW

C/W 20oC/W

For TA = Full Package Temperature Range (All Package Types)

Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC

GROUP A

LIMITS

SUBGROUPS TEMPERATURE

C-10µA

2 +125oC - 1000 µA

C -100 - nA

2 +125oC -1000 - nA

2 +125oC - 1000 nA

VOL <

VDD/2

1, 2, 3 +25oC, +125oC, -55oC- 4 V

1, 2, 3 +25oC, +125oC, -55oC11 - V

3. For accuracy, voltage is measured differentially to VDD. Limit is 0.050V max.

UNITSMIN MAX

7-495

Speciﬁcations CD4099BMS

TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS

GROUP A

PARAMETER SYMBOL CONDITIONS (NOTE 1, 2)

Propagation Delay Data to Output

Propagation Delay Write Disable to Output

Propagation Delay Reset to Output

Propagation Delay Address to Output

Transition Time TTHL

NOTES:

1. CL = 50pF, RL = 200K, Input TR, TF < 20ns.

2. -55oC and +125oC limits guaranteed, 100% testing being implemented.

PARAMETER SYMBOL CONDITIONS NOTES TEMPERATURE

Supply Current IDD VDD = 5V, VIN = VDD or GND 1, 2 -55oC, +25oC- 5 µA

Output Voltage VOL VDD = 5V, No Load 1, 2 +25oC, +125oC,

Output Voltage VOL VDD = 10V, No Load 1, 2 +25oC, +125oC,

Output Voltage VOH VDD = 5V, No Load 1, 2 +25oC, +125oC,

Output Voltage VOH VDD = 10V, No Load 1, 2 +25oC, +125oC,

Output Current (Sink) IOL5 VDD = 5V, VOUT = 0.4V 1, 2 +125oC 0.36 - mA

Output Current (Sink) IOL10 VDD = 10V, VOUT = 0.5V 1, 2 +125oC 0.9 - mA

Output Current (Sink) IOL15 VDD = 15V, VOUT = 1.5V 1, 2 +125oC 2.4 - mA

Output Current (Source) IOH5A VDD = 5V, VOUT = 4.6V 1, 2 +125oC - -0.36 mA

Output Current (Source) IOH5B VDD = 5V, VOUT = 2.5V 1, 2 +125oC - -1.15 mA

Output Current (Source) IOH10 VDD = 10V, VOUT = 9.5V 1, 2 +125oC - -0.9 mA

TPHL1 TPLH1

TPHL2 TPLH2

TPHL3 VDD = 5V, VIN = VDD or GND 9 +25oC - 350 ns

TPHL4 TPLH4

TTLH

VDD = 5V, VIN = VDD or GND 9 +25oC - 400 ns

VDD = 5V, VIN = VDD or GND 9 +25oC - 450 ns

VDD = 5V, VIN = VDD or GND 9 +25oC - 200 ns

TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS

VDD = 10V, VIN = VDD or GND 1, 2 -55oC, +25oC- 10µA

VDD = 15V, VIN = VDD or GND 1, 2 -55oC, +25oC- 10µA

SUBGROUPS TEMPERATURE

10, 11 +125oC, -55oC - 540 ns

10, 11 +125oC, -55oC - 473 ns

10, 11 +125oC, -55oC - 608 ns

10, 11 +125oC, -55oC - 270 ns

+125oC - 150 µA

+125oC - 300 µA

+125oC - 600 µA

-55oC

-55oC 0.64 - mA

-55oC 1.6 - mA

-55oC 4.2 - mA

-55oC - -0.64 mA

-55oC - -2.0 mA

-55oC - -1.6 mA

LIMITS

UNITSMIN MAX

LIMITS

UNITSMIN MAX

-50mV

4.95 - V

9.95 - V

7-496

+ 7 hidden pages