Intersil Corporation CD4060BMS Datasheet

December 1992

CD4060BMS

CMOS 14 Stage Ripple-Carry

Binary Counter/Divider and Oscillator

Features

• High Voltage Type (20V Rating)

• Common Reset

• 12MHz Clock Rate at 15V

• Fully Static Operation

• Buffered Inputs and Outputs

• Schmitt Trigger Input Pulse Line

• Standardized, Symmetrical Output Characteristics

• 100% Tested for Quiescent Current at 20V

• 5V, 10V and 15V Parametric Ratings

• Meets All Requirements of JEDEC Tentative Standard
No. 13B, “Standard Specifications for Description of
‘B’ Series CMOS Devices”

Oscillator Features

• All Active Components on Chip

• RC or Crystal Oscillator Configuration

• RC Oscillator Frequency of 690kHz Min. at 15V

Applications

• Control counters

• Timers

• Frequency Dividers

• Time Delay Circuits

Description

CD4060BMS consists of an oscillator section and 14 ripple
carry binary counter stages. The oscillator configuration allows
design of either RC or crystal oscillator circuits. A RESET input
is provided which resets the counter to the all O’s state and dis­ables the oscillator. A high level on the RESET line accom­plishes the reset function. All counter stages are master slave
flip-flops. The state of the counter is advanced one step in
binary order on the negative transition of øI (and ø
and outputs are fully buffered. Schmitt trigger action on the
input pulse line permits unlimited input pulse rise and fall times.

). All inputs

0

Pinout

1

Q12

2

Q13

3

Q14

4

Q6

5

Q5

6

Q7

7

Q4

8

VSS

Functional Diagram

12

R

11

øI

VSS = 8
VDD = 16

ø

0

ø

0

9

10

OSCILLATOR

14 STAGE

RIPPLE

COUNTER

AND

16
15
14
13
12
11
10

9

VDD
Q10
Q8
Q9
RESET
øI
ø

0

ø

0

Q4

Q5

Q6

Q7

Q8

Q9

Q10

Q12

Q13

Q14

7

5

4

6

14

13

15

1

2

3

The CD4060BMS is supplied in these 16 lead outline pack­ages:

Braze Seal DIP H4W
Frit Seal DIP H1F
Ceramic Flatpack H6W

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999

7-949

File Number

3317

Specifications CD4060BMS

Absolute Maximum Ratings Reliability Information

DC Supply Voltage Range, (VDD) . . . . . . . . . . . . . . . -0.5V to +20V

(Voltage Referenced to VSS Terminals)

Input Voltage Range, All Inputs . . . . . . . . . . . . .-0.5V to VDD +0.5V

DC Input Current, Any One Input . . . . . . . . . . . . . . . . . . . . . . . .±10mA

Operating Temperature Range. . . . . . . . . . . . . . . . -55

Package Types D, F, K, H

Storage Temperature Range (TSTG) . . . . . . . . . . . -65

o

C to +125oC

o

C to +150oC

Lead Temperature (During Soldering) . . . . . . . . . . . . . . . . . +265

At Distance 1/16 ± 1/32 Inch (1.59mm ± 0.79mm) from case for

10s Maximum

TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS

PARAMETER SYMBOL CONDITIONS (NOTE 1)

Supply Current IDD VDD = 20V, VIN = VDD or GND 1 +25

VDD = 18V, VIN = VDD or GND 3 -55oC-10µA

Input Leakage Current IIL VIN = VDD or GND VDD = 20 1 +25

VDD = 18V 3 -55oC -100 - nA

Input Leakage Current IIH VIN = VDD or GND VDD = 20 1 +25oC - 100 nA

VDD = 18V 3 -55oC - 100 nA
Output Voltage VOL15 VDD = 15V, No Load 1, 2, 3 +25oC, +125oC, -55oC - 50 mV
Output Voltage VOH15 VDD = 15V, No Load (Note 3) 1, 2, 3 +25oC, +125oC, -55oC 14.95 - V
Output Current (Sink)

(Excluding pins 9 & 10)

IOL5 VDD = 5V, VOUT = 0.4V 1 +25oC 0.53 - mA
IOL10 VDD = 10V, VOUT = 0.5V 1 +25oC 1.4 - mA
IOL15 VDD = 15V, VOUT = 1.5V 1 +25oC 3.5 - mA

Output Current (Source)
(Excluding pins 9 & 10)

IOH5A VDD = 5V, VOUT = 4.6V 1 +25oC - -0.53 mA
IOH5B VDD = 5V, VOUT = 2.5V 1 +25oC - -1.8 mA
IOH10 VDD = 10V, VOUT = 9.5V 1 +25oC - -1.4 mA

IOH15 VDD = 15V, VOUT = 13.5V 1 +25oC - -3.5 mA
N Threshold Voltage VNTH VDD = 10V, ISS = -10µA 1 +25oC -2.8 -0.7 V
P Threshold Voltage VPTH VSS = 0V, IDD = 10µA 1 +25oC 0.7 2.8 V
Functional F VDD = 2.8V, VIN = VDD or GND 7 +25oC VOH >

VDD = 20V, VIN = VDD or GND 7 +25oC
VDD = 18V, VIN = VDD or GND 8A +125oC
VDD = 3V, VIN = VDD or GND 8B -55oC

Input Voltage Low

VIL VDD = 5V, VOH > 4.5V, VOL < 0.5V 1, 2, 3 +25oC, +125oC, -55oC - 1.5 V

(Note 2)
Input Voltage High

VIH VDD = 5V, VOH > 4.5V, VOL < 0.5V 1, 2, 3 +25oC, +125oC, -55oC 3.5 - V

(Note 2)
Input Voltage Low

(Note 2)
Input Voltage High

(Note 2)

VIL VDD = 15V, VOH > 13.5V,

VOL < 1.5V

VIH VDD = 15V, VOH > 13.5V,

VOL < 1.5V

NOTES: 1. All voltages referenced to device GND, 100% testing being

implemented.

2. Go/No Go test with limits applied to inputs.

Thermal Resistance . . . . . . . . . . . . . . . . θ

Ceramic DIP and FRIT Package. . . . . 80oC/W 20oC/W

Flatpack Package . . . . . . . . . . . . . . . . 70

Maximum Package Power Dissipation (PD) at +125oC

For TA = -55
For TA = +100

o

C

Device Dissipation per Output Transistor . . . . . . . . . . . . . . . 100mW

o

C to +100oC (Package Type D, F, K). . . . . . 500mW

o

C to +125oC (Package Type D, F, K) . . . . .Derate

Linearity at 12mW/oC to 200mW

ja

o

C/W 20oC/W

For TA = Full Package Temperature Range (All Package Types)

Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC

GROUP A

LIMITS

SUBGROUPS TEMPERATURE

o

C-10µA

2 +125oC - 1000 µA

o

C -100 - nA

2 +125oC -1000 - nA

2 +125oC - 1000 nA

VOL <

VDD/2

VDD/2

1, 2, 3 +25oC, +125oC, -55oC- 4 V

1, 2, 3 +25oC, +125oC, -55oC11 - V

3. For accuracy, voltage is measured differentially to VDD. Limit
is 0.050V max.

θ

jc

UNITSMIN MAX

V

7-950

Specifications CD4060BMS

TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS

GROUP A

PARAMETER SYMBOL CONDITIONS (NOTES 1, 2)

Propagation Delay
Input Pulse Operation

TPHL1
TPLH1

VDD = 5V, VIN = VDD or GND 9 +25oC - 740 ns

øI to Q4
Propagation Delay

QN to QN + 1

Propagation Delay

TPHL2

VDD = 5V, VIN = VDD or GND 9 +25oC - 200 ns

TPLH2

TPHL3 VDD = 5V, VIN = VDD or GND 9 +25oC - 360 ns

RESET

Transition Time TTHL

VDD = 5V, VIN = VDD or GND 9 +25oC - 200 ns

TTLH

Maximum Input Pulse
Frequency

FØI VDD = 5V

VIN = VDD or GND

SUBGROUPS TEMPERATURE

10, 11 +125oC, -55oC - 999 ns

10, 11 +125oC, -55oC - 270 ns

10, 11 +125oC, -55oC - 486 ns

10, 11 +125oC, -55oC - 270 ns

9 +25oC 3.5 - MHz

10, 11 +125oC, -55oC 2.59 - MHz

NOTES:

1. VDD = 5V, CL = 50pF, RL = 200K

2. -55oC and +125oC limits guaranteed, 100% testing being implemented.

TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS

PARAMETER SYMBOL CONDITIONS NOTES TEMPERATURE

Supply Current IDD VDD = 5V, VIN = VDD or GND 1, 2 -55oC, +25oC- 5 µA

o

C - 150 µA

+125

o

VDD = 10V, VIN = VDD or GND 1, 2 -55

VDD = 15V, VIN = VDD or GND 1, 2 -55

Output Voltage VOL VDD = 5V, No Load 1, 2 +25

C, +25oC- 10µA

o

C - 300 µA

+125

o

C, +25oC- 10µA

o

C - 600 µA

+125

o

C, +125oC,

-55oC

o

Output Voltage VOL VDD = 10V, No Load 1, 2 +25

C, +125oC,

-55oC

Output Voltage VOH VDD = 5V, No Load 1, 2 +25

o

C, +125oC,

-55oC

o

Output Voltage VOH VDD = 10V, No Load 1, 2 +25

C, +125oC,

-55oC

o

Output Current (Sink)
(Excluding pins 9 & 10)

Output Current (Sink)
(Excluding pins 9 & 10)

Output Current (Sink)
(Excluding pins 9 & 10)

Output Current
(Source)
(Excluding pins 9 & 10)

Output Current
(Source)
(Excluding pins 9 & 10)

Output Current
(Source)
(Excluding pins 9 & 10)

IOL5 VDD = 5V, VOUT = 0.4V 1, 2 +125

IOL10 VDD = 10V, VOUT = 0.5V 1, 2 +125

IOL15 VDD = 15V, VOUT = 1.5V 1, 2 +125

IOH5A VDD = 5V, VOUT = 4.6V 1, 2 +125

IOH5B VDD = 5V, VOUT = 2.5V 1, 2 +125oC - -1.15 mA

IOH10 VDD = 10V, VOUT = 9.5V 1, 2 +125oC - -0.9 mA

C 0.36 - mA

o

C 0.64 - mA

-55

o

C 0.9 - mA

o

C 1.6 - mA

-55

o

C 2.4 - mA

o

-55

C 4.2 - mA

o

C - -0.36 mA

o

C - -0.64 mA

-55

o

C - -2.0 mA

-55

o

C - -1.6 mA

-55

LIMITS

UNITSMIN MAX

LIMITS

UNITSMIN MAX

-50mV

-50mV

4.95 - V

9.95 - V

7-951