Intersil Corporation CD40174BMS Datasheet

CD40174BMS

December 1992

Features

• High Voltage Type (20V Rating)

• 5V, 10V and 15V Parametric Ratings

• Standardized, Symmetrical Output Characteristics

• 100% Tested for Quiescent Current at 20V

• Maximum Input Current of 1µA at 18V Over Full Pack-

age Temperature Range, 100nA at 18V and +25

• Noise Margin (Over full Package Temperature Range):

- 1V at VDD = 5V

- 2V at VDD = 10V

- 2.5V at VDD = 15V

• Meets All Requirements of JEDEC Tentative Standard No. 13A, “Standard Speciﬁcations for Description of ‘B’ Series CMOS Devices”

Applications

• Shift Registers

• Buffer/Storage Registers

• Pattern Generators

Description

CMOS Hex ‘D’-Type Flip-Flop

Pinout

CD40174BMS

TOP VIEW

F/F1

F/F2

15 14 13 12 11 10

VDD Q6 D6 D5 Q5 D4 Q4 CLOCK

Q1 D1 D2 Q2 D3 Q3

VSS

1 2 3 4 5 6 7 8

CLEAR

Functional Diagram

CD40174BMS consists of six identical ‘D’-Type ﬂip-ﬂops having independent DATA inputs. The CLOCK and

CLEAR inputs are common to all six units. Data is transferred to the Q outputs on the positive going transition of the clock pulse. All six ﬂip-ﬂops are simultaneously reset by a low level on the CLEAR input.

The CD40174BMS is supplied in these 16 lead outline packages:

Braze Seal DIP H4T Frit Seal DIP H1E Ceramic Flatpack H6W

CLOCK

CLEAR

9 1

VSS = 8 VDD = 16

F/F3

F/F4

F/F5

F/F6

7-1384

File Number

3359

Speciﬁcations CD40174BMS

Absolute Maximum Ratings Reliability Information

DC Supply Voltage Range, (VDD) . . . . . . . . . . . . . . . -0.5V to +20V

(Voltage Referenced to VSS Terminals)

Input Voltage Range, All Inputs . . . . . . . . . . . . .-0.5V to VDD +0.5V

DC Input Current, Any One Input . . . . . . . . . . . . . . . . . . . . . . . .±10mA

Operating Temperature Range. . . . . . . . . . . . . . . . -55

Package Types D, F, K, H

Storage Temperature Range (TSTG) . . . . . . . . . . . -65

C to +125oC

C to +150oC

Lead Temperature (During Soldering) . . . . . . . . . . . . . . . . . +265

At Distance 1/16 ± 1/32 Inch (1.59mm ± 0.79mm) from case for 10s Maximum

TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS

PARAMETER SYMBOL CONDITIONS (NOTE 1)

Supply Current IDD VDD = 20V, VIN = VDD or GND 1 +25oC-2µA

VDD = 18V, VIN = VDD or GND 3 -55

Input Leakage Current IIL VIN = VDD or GND VDD = 20 1 +25oC -100 - nA

VDD = 18V 3 -55oC -100 - nA

Input Leakage Current IIH VIN = VDD or GND VDD = 20 1 +25oC - 100 nA

VDD = 18V 3 -55oC - 100 nA Output Voltage VOL15 VDD = 15V, No Load 1, 2, 3 +25oC, +125oC, -55oC - 50 mV Output Voltage VOH15 VDD = 15V, No Load (Note 3) 1, 2, 3 +25oC, +125oC, -55oC 14.95 - V Output Current (Sink) IOL5 VDD = 5V, VOUT = 0.4V 1 +25oC 0.53 - mA Output Current (Sink) IOL10 VDD = 10V, VOUT = 0.5V 1 +25oC 1.4 - mA Output Current (Sink) IOL15 VDD = 15V, VOUT = 1.5V 1 +25oC 3.5 - mA Output Current (Source) IOH5A VDD = 5V, VOUT = 4.6V 1 +25oC - -0.53 mA Output Current (Source) IOH5B VDD = 5V, VOUT = 2.5V 1 +25oC - -1.8 mA Output Current (Source) IOH10 VDD = 10V, VOUT = 9.5V 1 +25oC - -1.4 mA Output Current (Source) IOH15 VDD = 15V, VOUT = 13.5V 1 +25oC - -3.5 mA N Threshold Voltage VNTH VDD = 10V, ISS = -10µA 1 +25oC -2.8 -0.7 V P Threshold Voltage VPTH VSS = 0V, IDD = 10µA 1 +25oC 0.7 2.8 V Functional F VDD = 2.8V, VIN = VDD or GND 7 +25oC VOH >

VDD = 20V, VIN = VDD or GND 7 +25oC VDD = 18V, VIN = VDD or GND 8A +125oC VDD = 3V, VIN = VDD or GND 8B -55oC

Input Voltage Low

VIL5 VDD = 5V, VOH > 4.5V, VOL < 0.5V 1, 2, 3 +25oC, +125oC, -55oC - 1.5 V

(Note 2) Input Voltage High

(Note 2) Input Voltage Low

(Note 2) Input Voltage High

(Note 2)

VIH5 VDD = 5V, VOH > 4.5V,

VOL < 0.5V

VIL15 VDD = 15V, VOH > 13.5V,

VOL < 1.5V

VIH15 VDD = 15V, VOH > 13.5V,

VOL < 1.5V

NOTES: 1. All voltages referenced to device GND, 100% testing being

implemented.

2. Go/No Go test with limits applied to inputs.

Thermal Resistance . . . . . . . . . . . . . . . . θ

Ceramic DIP and FRIT Package. . . . . 80oC/W 20oC/W

Flatpack Package . . . . . . . . . . . . . . . . 70

Maximum Package Power Dissipation (PD) at +125oC

For TA = -55 For TA = +100

Linearity at 12mW/oC to 200mW

Device Dissipation per Output Transistor . . . . . . . . . . . . . . . 100mW

C to +100oC (Package Type D, F, K). . . . . . 500mW

C to +125oC (Package Type D, F, K) . . . . .Derate

C/W 20oC/W

For TA = Full Package Temperature Range (All Package Types)

Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC

GROUP A

LIMITS

SUBGROUPS TEMPERATURE

2 +125

C - 200 µA

C-2µA

2 +125oC -1000 - nA

2 +125oC - 1000 nA

VOL <

VDD/2

1, 2, 3 +25oC, +125oC, -55oC 3.5 - V

1, 2, 3 +25oC, +125oC, -55oC- 4 V

1, 2, 3 +25oC, +125oC, -55oC11 - V

3. For accuracy, voltage is measured differentially to VDD. Limit is 0.050V max.

UNITSMIN MAX

7-1385

Speciﬁcations CD40174BMS

TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS

GROUP A

PARAMETER SYMBOL CONDITIONS (Note 1, 2)

Propagation Delay Clock to Output

Propagation Delay CLEAR to Output

Transition Time TTHL

Maximum Clock Input Frequency

NOTES:

1. CL = 50pF, RL = 200K, Input TR, TF < 20ns.

2. -55oC and +125oC limits guaranteed, 100% testing being implemented.

PARAMETER SYMBOL CONDITIONS NOTES TEMPERATURE

Supply Current IDD VDD = 5V, VIN = VDD or GND 1, 2 -55oC, +25oC- 1 µA

Output Voltage VOL VDD = 5V, No Load 1, 2 +25oC, +125oC,

Output Voltage VOL VDD = 10V, No Load 1, 2 +25oC, +125oC,

Output Voltage VOH VDD = 5V, No Load 1, 2 +25oC, +125oC,

Output Voltage VOH VDD = 10V, No Load 1, 2 +25oC, +125oC,

Output Current (Sink) IOL5B VDD = 5V, VOUT = 0.4V 1, 2 +125oC 0.36 - mA

Output Current (Sink) IOL10 VDD = 10V, VOUT = 0.5V 1, 2 +125oC 0.9 - mA

Output Current (Sink) IOL15 VDD = 15V, VOUT = 1.5V 1, 2 +125oC 2.4 - mA

Output Current (Source) IOH5A VDD = 5V, VOUT = 4.6V 1, 2 +125oC - -0.36 mA

Output Current (Source) IOH5B VDD = 5V, VOUT = 2.5V 1, 2 +125oC - -1.15 mA

Output Current (Source) IOH10 VDD = 10V, VOUT = 9.5V 1, 2 +125oC - -0.9 mA

TPHL1 TPLH1

TPHL2 VDD = 5V, VIN = VDD or GND 9 +25oC - 200 ns

TTLH

FCL VDD = 5V, VIN = VDD or GND 9 +25oC 3.5 - MHz

VDD = 5V, VIN = VDD or GND 9 +25oC - 300 ns

VDD = 5V, VIN = VDD or GND 9 +25oC - 200 ns

TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS

VDD = 10V, VIN = VDD or GND 1, 2 -55oC, +25oC- 2 µA

VDD = 15V, VIN = VDD or GND 1, 2 -55oC, +25oC- 2 µA

SUBGROUPS TEMPERATURE

10, 11 +125oC, -55oC - 405 ns

10, 11 +125oC, -55oC - 270 ns

10, 11 +125oC, -55oC 3.5/1.35 - MHz

+125oC-30µA

+125oC-60µA

+125oC - 120 µA

-55oC

-55oC 0.64 - mA

-55oC 1.6 - mA

-55oC 4.2 - mA

-55oC - -0.64 mA

-55oC - -2.0 mA

-55oC - -1.6 mA

LIMITS

UNITSMIN MAX

LIMITS

UNITSMIN MAX

-50mV

4.95 - V

9.95 - V

7-1386

+ 5 hidden pages