International Rectifier PVT322, PVT322S, PVT322S-T Datasheet
Part Identification
PVT322 thru-hole
PVT322S SMT
PVT322S-T SMT, T&R
Data Sheet No. 1.042
Series PVT322
Microelectronic
Power IC Relay
Dual Pole, Normally Open
HEXFET® POWER MOSFET PHOTOVOLTAIC RELAY
(HEXFET is the registered trademark for International Rectifier Power MOSFETs)
Applications
On/Off Hook switch n
T ip and Ring Line switching n
General switching n
PVT322 Features
HEXFET Power MOSFET output n
Bounce-free operation n
4,000 V
RMS
I/O isolation n
Linear AC/DC operation n
Solid-State reliability n
UL recognition pending n
General Description
The PVT322 Series Photovoltaic Relay is a dualpole, normally open solid-state relay that can
replace electromechanical relays in many applications. It utilizes International Rectifier’s HEXFET
power MOSFET as the output switch, driven by an
integrated circuit photovoltaic generator of novel
construction. The output switch is controlled by
radiation from a GaAlAs light emitting diode (LED)
which is optically isolated from the photovoltaic
generator.
Series PVT322 Relays are packaged in an 8-pin,
molded DIP package with either through-hole or
surface mount (gull-wing) terminals. It is available
in standard plastic shipping tubes or on tape-andreel. Please refer to Part Identification information
opposite.
0-250V , 170mA AC/DC
Electrical Specifications (-40°C ≤ TA ≤ +85°C unless otherwise specified)
INPUT CHARACTERISTICS Limits Uni ts
Minimum Control Current (See figure1) 2.0 mA
Maximum Control Current for Off-State Resistance @TA=+25°C 0.4 mA
Control Current Range (Caution: current limit input LED, see figure 5) 2.0 to 25 mA
Maximum Reverse Voltage 7.0 V
Connection Diagram
OUTPUT CHARACTERISTICS Limits Unit s
Operating V oltage Range 0 to ±250 V
(DC or AC peak)
Maximum Load Current @ TA=+40°C
5mA Control (See figure 1) (single and dual channel operation) 170 mA
Maximum Peak Load Current (10ms maximum duration)
(single and dual channel operation) 500 mA
Maximum On-State Resistance @T
A
=+25°C
For 50mA Pulsed load, 5mA Control (see figure 3) 10 Ω
Maximum Off-State Leakage @TA=+25°C, ±250V (see figure 4) 1.0 µA
Maximum Turn-On Time @T
A
=+25°C (see figure 6) 3.0 ms
For 50mA, 100 VDC load, 5mA Control
Maximum Turn-Off Time @T
A
=+25°C (see figure 6) 0.5 ms
For 50mA, 100 VDC load, 5mA Control
Maximum Output Capacitance @ 50 V
DC
50 pF
GENERAL CHARACTERISTICS Limits Units
Minimum Dielectric Strength, Input-Output 4000 V
RMS
Minimum Dielectric Strength, Pole-to-Pole 1000 V
DC
Minimum Insulation Resistance, Input-Output, @TA=+25°C, 50%RH, 100V
DC
10
12
Ω
Maximum Capacitance, Input-Output 1.0 pF
Maximum Pin Soldering Temperature (10 seconds maximum) +260
Ambient Temperature Range: Operating -40 to +85 °C
Storage -40 to +100
Series PVT322
Loading...