International Rectifier PVG612, PVG612S, PVG612S-T Datasheet
PD 1.035A
Series PVG612
Microelectronic
Power IC Relay
Single Pole, Normally Open, 0-60V, 1.0A AC/ 2.0 A DC
General Description
The PVG612 Series Photovoltaic Relay is a singlepole, normally open solid-state relay that can
replace electromechanical relays in many applications. It utilizes International Rectifier’s proprietary
HEXFET power MOSFET as the output switch,
driven by an integrated circuit photovoltaic generator of novel construction. The output switch is
controlled by radiation from a GaAlAs light emitting
diode (LED) which is optically isolated from the
photovoltaic generator.
These units exceed the performance capabilities of
electromechanical relays in operating life, sensitivity,
stability of on-resistance, miniaturization, insensitivity to magnetic fields and ruggedess. The compact
PVG612 is particularly suited for isolated switching
of high currents from 12 to 48 Volt AC or DC power
sources.
Series PVG612 Relays are packaged in a 6-pin,
molded DIP package with either through-hole or
surface mount (gull-wing) terminals. It is available in
standard plastic shipping tubes or on tape-and-reel.
Please refer to Part Identification infor mation
opposite.
PVG612 Features
HEXFET Power MOSFET output
■■
■■
■
Bounce-free operation
■■
■■
■
High load current capacity
■■
■■
■
High off-state resistance
■■
■■
■
Linear AC/DC operation
■■
■■
■
4,000 V
RMS
I/O isolation
■■
■■
■
Solid-State reliability
■■
■■
■
UL recognized and CSA certified
■■
■■
■
HEXFET® Power MOSFET Photovoltaic Relay
Applications
n Programmable Logic Controllers
n Computers and Peripheral Devices
n Audio Equipment
n Power Supplies and Power Distribution
n Control of Displays and Indicators
n Industrial Automation
Part Identification
PVG612 through-hole
PVG612S surface-mount
PVG612S-T surface-mount, Tape and Reel
(HEXFET is the registered trademark for International Rectifier Power MOSFETs)
Series PVG612 HEXFET® Photovoltaic Relay
INPUT CHARACTERISTICS Limits Units
Minimum Control Current (see figure 1) 5.0 mA
Maximum Control Current for Off-State Resistance @ TA = +25°C 0.4 mA
Control Current Range (Caution: current limit input LED, see figure 6) 5.0 to 25 mA
Maximum Reverse Voltage 7.0 V
OUTPUT CHARACTERISTICS Limits Units
Operating Voltage Range 0 to ±60 V
(DC or AC peak)
Maximum Load Current @ TA = +40°C, 10mA Control (see figure 1)
A Connection 1.0 A (AC or DC)
B Connection 1.5 A (DC)
C Connection 2.0 A (DC)
Maximum Pulsed Load Current @ TA
=
+25°C (100 ms @ 10% Duty Cycle)
A Connection 2.4 A (AC or DC)
Maximum On-State Resistance @TA =+25°C
For 1A pulsed load, 10mA Control (see figure 4) A Connection 500 mΩ
B Connection 250 mΩ
C Connection 150 mΩ
Minimum Off-State Resistance @TA =+25°C, ±48V (see figure 5) 10
8
Ω
Maximum Turn-On Time @TA =+25°C (see figure 7)
For 500mA, 50 VDC load, 10mA Control 2.0 m s
Maximum Turn-Off Time @TA =+25°C (see figure 7)
For 500mA, 50 VDC load, 10mA Control 0.5 m s
Maximum Output Capacitance @ 50V
DC
(see figure 2) 130 pF
GENERAL CHARACTERISTICS
Limits Units
Minimum Dielectric Strength, Input-Output 4000 V
RMS
Minimum Insulation Resistance, Input-Output, @TA =+25°C, 50%RH, 100V
DC
10
12
Ω
Maximum Capacitance, Input-Output 1.0 pF
Maximum Pin Soldering Temperature (10 seconds maximum) +260
Ambient Temperature Range: Operating -40 to +85 °C
Storage -40 to +100
Electrical Specifications (-40°C ≤ TA ≤ +85°C unless otherwise specified)
Connection Diagrams
Loading...