International Rectifier IRHM9230 Datasheet
Provisional Data Sheet No. PD-9.1395
Next Data SheetIndex
Previous Datasheet
To Order
REPETETIVE AVALANCHE AND dv/dt RATED
HEXFET® TRANSISTOR
-200 Volt, 0.8
International Rectifier’s P-Channel RAD HARD technology
HEXFETs demonstrate excellent threshold v oltage stability
and breakdown voltage stability at total radiation doses as
high as 105 Rads (Si). Under identical pre- and post-radia-
tion test conditions, International Rectifier’s P-Channel RAD
HARD HEXFETs retain identical electrical specifications
up to 1 x 105 Rads (Si) total dose. No compensation in gate
drive circuitry is required. These devices are also capable
of surviving transient ionization pulses as high as 1 x 10
Rads (Si)/Sec, and return to normal operation within a few
microseconds. Single Event Effect (SEE) testing of International Rectifier P-Channel RAD HARD HEXFETs has
demonstrated virtual immunity to SEE failure. Since the
P-Channel RAD HARD process utilizes International
Rectifier’s patented HEXFET technology, the user can expect the highest quality and reliability in the industry.
P-Channel RAD HARD HEXFET transistors also feature all
of the well-established advantages of MOSFETs, such as
voltage control,very fast switching, ease of paralleling and
temperature stability of the electrical parameters.
They are well-suited for applications such as switching
power supplies, motor controls, inverters, choppers, audio
amplifiers and high-energy pulse circuits in space and weap-
ons environments.
ΩΩ
Ω, RAD HARD HEXFET
ΩΩ
IRHM9230
P-CHANNEL
RAD HARD
Product Summary
Part Number BV
DSS
IRHM9230 -200V 0.8Ω -6.5A
Features:
■ Radiation Hardened up to 1 x 105 Rads (Si)
12
■ Single Event Burnout (SEB) Hardened
■ Single Event Gate Rupture (SEGR) Hardened
■ Gamma Dot (Flash X-Ray) Hardened
■ Neutron Tolerant
■ Identical Pre- and Post-Electrical Test Conditions
■ Repetitive Avalanche Rating
■ Dynamic dv/dt Rating
■ Simple Drive Requirements
■ Ease of Paralleling
■ Hermetically Sealed
■ Ceramic Eyelets
■ Electrically Isolated
R
DS(on)
I
D
Absolute Maximum Ratings
Parameter IRHM9230 Units
ID @ VGS = -12V, TC = 25°C Continuous Drain Current -6.5
ID @ VGS = -12V, TC = 100°C Continuous Drain Current -4.1
I
DM
PD @ TC = 25°C Max. Power Dissipation 75 W
V
GS
E
AS
I
AR
E
AR
dv/dt Peak Diode Recovery dv/dt -5.0
T
J
T
STG
Notes: See page 4
Pulsed Drain Current -26
Linear Derating Factor 0.2 W/K
Gate-to-Source V oltage ±20 V
Single Pulse Avalanche Energy 330 mJ
Avalanche Current -6.5 A
Repetitive Avalanche Energy 7.5 mJ
Operating Junction -55 to 150
Storage Temperature Range
Lead Temperature 300 (0.063 in. (1 .6mm) from case for 10s)
Weight 9.3 (typical) g
Pre-Radiation
A
V/ns
o
C
IRHM9230 Device Pre-Radiation
Next Data SheetIndex
Previous Datasheet
To Order
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter Min. Typ. Max. Units Test Conditions
BV
DSS
∆BV
R
DS(on)
V
GS(th)
g
fs
I
DSS
I
GSS
I
GSS
Q
g
Q
gs
Q
gd
t
d(on)
t
r
t
d(off)
t
f
L
D
L
S
C
iss
C
oss
C
rss
DSS
Drain-to-Source Breakdown Voltage -200 — — V VGS = 0V, ID = -1.0 mA
/∆TJTemperature Coefficient of Breakdown — -0.10 — V/°C Reference to 25°C, ID = -1.0 mA
Voltage
Static Drain-to-Source — — 0.8 VGS = -12V, ID = -4.1A
On-State Resistance — — 0.92 Ω VGS = -12V, ID = -6.5A
Gate Threshold V oltage -2.0 — -4.0 V VDS = VGS, ID = -1.0 mA
Forw ard Tr ansconductance 2.2 — — S ( ) VDS > -15V, IDS = -6.5A
Zero Gate Voltage Drain Current — — -25 VDS = 0.8 x Max. Rating,VGS = 0V
— — -250 VDS = 0.8 x Max. Rating
Gate-to-Source Leakage Forward — — -100 VGS = -20V
Gate-to-Source Leakage Reverse — — 100 VGS = 20V
Total Gate Charge — — 35 VGS = -12V, ID = -6.5A
Gate-to-Source Charge — — 10 VDS = Max. Rating x 0.5
Gate-to-Drain (“Miller”) Charge — — 25
Turn-On Delay Time — — 50 VDD = -100V, ID = -6.5A, RG = 2.35Ω
Rise Time — — 90
Turn-Off Delay Time — — 90
Fall Time — — 90
Internal Drain Inductance — 5.0 —
Internal Source Inductance — 15 —
Input Capacitance — 1100 — VGS = 0V, VDS = -25V
Output Capacitance — 310 — f = 1.0 MHz
Reverse Transfer Capacitance — 5 5 —
Ω
µA
nA
nC
ns
Measured from the
drain lead, 6mm (0.25
in.) from package to
center of die.
nH
Measured from the
source lead, 6mm
(0.25 in.) from package
to source bonding pad.
pF
VGS = 0V, TJ = 125°C
Modified MOSFET
symbol showing the
internal inductances.
Source-Drain Diode Ratings and Characteristics
Parameter Min. Typ. Max. Units Test Conditions
I
Continuous Source Current — — -6.5 Modified MOSFET symbol
S
(Body Diode)
I
Pulse Source Current — — -26
SM
(Body Diode) ➀
V
Diode Forward V oltage — — -5.0 V Tj = 25°C, IS = -6.5A, VGS = 0V
SD
t
Reverse Recovery Time — — 400 ns Tj = 25°C, IF = -6.5A, di/dt ≤ -100 A/µs
rr
Q
Reverse Recovery Charge — — 3.0 µCV
RR
t
Forward T urn-On Time
on
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter Min. Typ. Max. Units Test Conditions
R
R
thJC
thJA
Junction-to-Case — — 1.67
Junction-to-Ambient — 30 —
Notes: See page 4
showing the integral Reverse
p-n junction rectifier.
A
K/W
≤ -50V
DD
Loading...