International comfort products 1 For All, 1 For All TSTAT0710 Owner's Manual

OWNER'S MANUAL

P/N TSTAT0710

1 For All

Programmable

Digital Thermostat

Am

6:03

Su

70

7 Day Programmable
4 Time Periods per Day
Auto Changeover
Large, Backlit Display
Thermoglow Backlight

Meets Residential California Title 24

Use with most Air Conditioning & Heating Systems including: 1 or 2 Stage
Electric Cooling & Gas Heating, Heat Pump, Electric or Hydronic Heat.

International Comfort Products 2003

o

70

COOL

Warmer

ModeCooler

Very Easy to Program
Programmable Fan
No Batteries Required
Outdoor Temperature
Sensor Available

Table Of Contents

FRONT PANEL
DISPLAY
QUICK START Set the clock and go
BASIC OPERATION
PROGRAMMING 4 Time Periods
ADVANCED SETUP
ABOUT ADVANCED OPERATION
WARRANTY

CAUTION

Follow Installation Instructions before proceeding.

SET THERMOSTAT TO MODE “OFF” PRIOR TO

CHANGING SETTINGS IN SETUP OR RESTORING

FACTORY DEFAULTS.

International Comfort Products 2003

P/N TSTAT0710

2
3
5
6

8
12
17
22

Page 1

Front Panel

Heat or Cool
Indicator

Red = Heat,
Green = Cool

Cooler or ­Button

6:03

Su

Am

70

ModeCooler

Am

6:03

Su

70

ModeCooler

Mode Button

VACATION

o

70

COOL

Warmer

SEVEN DAY

PROGRA

70

COOL

Warmer

FAN

VACATION

SET CLOCK

PROGRAM

OUTSIDE

MM ABLE

OUTSIDE

Backlit LCD
Display

o

Warmer or +
Button

FAN

SET CLOCKPROGRAM

Page 2

Display

2

9

1

6

8

:

12:00

SMTWTFS

Service

Filter

AUTO

Night

OFF

Morning
Evening

Fan On

Day

1

Am

Pm

11

Program

Start

10

On

Setup

Locked

88

7

88

Outside

88

COOL

HEAT

o

o

4

1

5

1

4

1

Mode Indicators
Selects the operation mode of the equipment.
HEAT - indicates the heat mode.
COOL - indicates the air conditioning mode.
AUTO - indicates the system will automatically
changeover between heat and cool modes
as the temperature varies.
OFF - indicates the entire system is turned off.
PROGRAM ON - indicates the stored program
is enabled to run. Page 8.

2

Clock with Day of the Week
Indicates the current time and day. This clock is
also used to program the timer periods. Page 5.

3

Room Temperature Display
Indicates the current room temperature.

4

Desired Set Temperature
Indicates desired room temperature(s). Page 7.

3

Page 3

Display

5

6

7

8

9

10

Outside Indication
Indicates the temperature displayed is from
the optional outside sensor. Page 21.

Morning, Day, Evening & Night Indication
Indicates the program time period. Page 8-11.

Setup Indication
Indicates the thermostat is in the programming
mode. Page 12.

Fan Operation Indication
Fan On - indicates constant, continuous fan
operation.
When Fan On is not lit - indicates the fan will
only operate when necessary to heat or
to cool. Page 7.

Service Filter Indication
Service Filter indicates when the filter should
be serviced under normal conditions.
Appears after 0 - 1950 hours of blower
operation (adjustable). Page 15.

Locked Indication
Locked appears after the right combination of
buttons are pressed, rendering the buttons
inoperative. Page 22.

11

Start Indication
Start appears when programming
timer functions. Page 8.

Page 4

Quick Start Set the Clock and Go

SET CLOCK

Press the SET CLOCK
button.

:

12:00

Su

Am

Setup

Setup

Press the SET CLOCK

i

2

SET CLOCK

During Setup & Programming:

Pressing the Up and Down
buttons will modify the flashing
selection.

.
(Represented in dark black)

Press

MODE

To adjust the

clock or Day use

buttons.

button as above to
return to normal
operation.

This thermostat is preprogrammed from the
factory to operate 1 or 2 Stage equipment without
the need for further programming. To optimize the
installation of this thermostat follow the instructions
in the Advanced Setup section.

Page 5

Basic Operation

Select Mode

The HEAT setting indicates the

temperature the room has to
reach before the furnace will

turn on to heat the room.

The COOL setting indicates the

temperature the room has to

reach before the air conditioner

will turn on to cool the room.

AUTO will automatically select

heat or cool based on room

temperature demand.

Program On will activate the

stored timer operation.
(Morning, Day, Evening

& Night Periods)

OFF indicates both heating

and air conditioning

systems are turned off.

:

12:00

M

:

12:00

M

:

12:00

M

AUTO

:

12:00

M

:

12:00

M

OFF

Pm

70

Pm

70

Pm

70

Program

Pm

Day

70

Pm

70

HEAT

o

70

o

78

COOL

o

78

COOL

HEAT

o

70

78

COOL

HEAT

o

o

On

70

Press

MODE

Press

MODE

Press

MODE

Press

MODE

Page 6

Basic Operation

Select Desired Temperature

:

M

AUTO

Pm

12:00

70

Pressing the Up or Down buttons in Auto mode will adjust both the heat and cool
set temperatures simultaneously.
Pressing the Up or Down buttons in Heat or Cool modes will adjust only the

heat or cool set temperature.

Fan

Operation

:

Pm

12:00

Su

Fan On

65

FAN

78

COOL

HEAT

70

Press

HEAT

62

o

o

Fan On indicates constant fan operation.

This feature is active even if the thermostat

o

is set to Off.

In any mode, adjust the

desired Set Temperature

with

buttons.

Page 7