Intermec Technologies 1555-2450 User Manual

ROGERS LABS, INC.
4405 West 259th Terrace Louisburg, KS 66053 Phone / Fax (913) 837-3214
May 10, 2001
Federal Communications Commission Equipment Approval Services P.O. Box 35815 Pittsburgh, PA 15251-3315
Applicant: INTERMEC TECHNOLOGIES CORPORATION
6001 36th Avenue West Everett, WA 98203-9280
Phone: (505) 856-8054 RE: Response for reference number 19212. Equipment: FCC ID: HN21555-2450
FCC Rules: Part 2 and 15.247 Gentlemen:
Attached please find our response to your request for information regarding the Intermec Technology submittal application for grant of certification for HN21555-2450, EA100016. A copy of the request is included here for reference.
To: Scot Rogers, Rogers Labs, Inc From: Joe Dichoso
jdichoso@fcc.gov FCC Application Processing Branch
Re: FCC ID HN21555-2450 Applicant: Intermec Corporation Correspondence Reference Number: 19212 731 Confirmation Number: EA100016
Expiration 6/3/01. 60 days from original request.
The manual statement concerning RF Safety does not agree with the SAR report. The SAR report indicates 5 cm from the body. However, an additional statement was added to maintain 4 cm from the operators body, eyes, etc... Provide additional SAR data to reflect the new additional RF safety language.
The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 60 days of the original e-mail date may result in application dismissal pursuant to Section 2.917 (c) and forfeiture of the filing fee pursuant to section 1.1108.
FCC Response letter for request number 19005.
l Page 2 May 10, 2001 RESPONSE
There was a type mistake in the operator’s manual. It erroneously stated 4cm (2 inches) and should read 5cm (2 inches). This type mistake has been corrected and a copy of the corrected page has been submitted to the FCC for approval. We apologize for the error and request you continue with the Grant of Certification.
Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely,
Scot Rogers Rogers Labs, Inc. Enclosures