Intermec 871-221-001 Product Data Sheet
SF
61B
Accessory Guide
Wearables
Accessory Name Part Number Description
Magnet End-Cap
and Belt Loop
SF61-MAG-S001 This two-piece kit secures the
scanner to your belt with magnetic
force. Simply attach the belt loop
with magnet to your belt, and ax
the magnetic end-cap to the SF61B
mobility scanner. This provides a
quick and convenient attach/release
method. A small plastic tool is
included for installation/removal.
Backward
Compatible
with SF51
No
Ring End-Cap and
Wrist Strap
Belt Loop, Standard 825-171-002 Belt loop with snap closure, allowing
Belt Clip, Industrial 825-172-002 A more heavy-duty version of the
SF61-RIN-S001 This two-piece kit includes a
end-cap with ring that axes to
the SF61B mobility scanner, and
a convenient wrist strap with
cord-tightener. Simply thread the
wrist strap through the ring, and
the scanner can be conveniently
worn around your wrist or arm--yet
easily stowed away when both hands
are needed. A small plastic tool is
included for installation/removal.
the SF61B to be conveniently attached
to your belt. Note: Does not include
the scanner magnet end-cap (see
SF61-MAG-S001 for the entire kit).
above belt loop, this industrial clip
allows the SF61B to be conveniently
attached to your belt. Note: Does
not include the scanner magnet
end-cap (see SF61-MAG-S001).
No
Yes
Yes
Chest Strap Holder 825-173-002 Designed for high-volume scanning
in the DC or warehouse, this chest
strap includes an adjustable waist
with heavy-duty side squeeze
buckle, and suspender with magnetic
attachment. Fully adjustable.
1
Yes
SF
61B
Accessory Guide
Holders and Chargers
Accessory Name Part Number Description
USB Charger,
Single Bay
SF61-UPK-S001 Charge a single SF61B mobility
scanner via a USB port. (Requires a
minimum 5V power source.)
Backward
Compatible
with SF51
No
Charge Cradle,
Single Bay
Charge Cradle,
Quad Bay
FlexDock Cup,
Dual Charge
FlexDock Base,
Quad Charge
871-221-001 Charge cradle acommodates a single
SF61B or SF51 mobility scanner. Includes a
mounting plate for fixed-mounting onto a
countertop or wall. Separate power supply
(851-089-306) must be purchased separately.
871-222-001 Charge cradle acommodates up to four
SF61B or SF51 mobility scanners. Includes a
mounting plate for fixed-mounting onto a
countertop or wall. Separate power supply
(851-088-201) must be purchased separately.
213-007-001 Supports the charging of two SF61B scanners
when snapped into the bay of a FlexDock
base (ordered separately--see below).
852-916-001 Provides four bays for charging. When
combined with the FlexDock dual-charge
cup above, this base can support the
simultaneous charging of up to eight SF61B
mobility scanners. FlexDock cups, power
supply (851-06 4-327), and country-specific
line cord must be ordered separately.
Yes
Yes
No
No
FlexDock Base,
Dual Charge
FlexDock Kit,
Quad Charge
2
852-918-001 Provides two bays for charging. When
combined with the FlexDock dual-charge
cup above, this base can support the
simultaneous charging of up to four SF61B
mobility scanners. FlexDock cups, power
supply (851-095-121), and countr y-specific
line cord must be ordered separately.
DX2A28820 This comprehensive charge kit includes: two
SF61B FlexDock cups, a FlexDock dual charge
base, and a universal power supply. Must
order country-specific line cord seperately.
No
No
Loading...