Intermec 851-090-001 Product Data Sheet
Docks and Modules Accessories
Accessory Name Part Number Description
CN
Accessories Guide
Single Dock 871-025-001 USB Host and Client Support with bay for
charging an auxiliary battery pack. (7.5”L x
4.0”W x 2.3”T) Requires Power Supply 851082-003 and country-specific AC power
cord. Optional: Single Dock Ethernet or
Modem Modules.
Single Dock Ethernet Module
Single Dock Modem Module 871-025-102 CN3 v.92 Modem Module interfaces with
Multi-Dock 871-026-001 4-slot Ethernet dock provides extra port
871-025-101 CN3 Ethernet Module interfaces with
USB Host connector on Single Dock,
p/n 871-025-001. (1.5”L x 2.5”W x 1”T)
USB Host connector on Single Dock, p/n
871-025-001. (1.5”L x 2.5”W x 1”T) LEDs to
indicate DTR, DCD, TX and RX status.
allowing for ability to link up to three (3)
multidocks. (17.2”L x 3.75”W x 2.3” T)
Requires Power Supply 851-075-003 and
country-specific AC power cord.
Multi-Dock, Charge Only 871-026-002 Allows for charging up to 4 devices.
Requires power supply 851-075-003 and
country specific power cord. (17.2”L x
3.75”W x 2.3” T)
Multidock Wall Mount Kit 203-641-002 Allows for mounting of one CN3 Ethernet
or Charge Only Multi-Dock to vertical wall
surface. (Used with 700 series too.)
Vehicle Dock 871-027-001 Provides 3.5 mm headphone (output) jack
to allow for integration into the vehicle
audio system. Cabled RS232 or USB Host
support is also available. Requires use of
Intermec RS232 Serial cable (p/n 225-737-
001) or Intermec USB cable VE011-2016.
Handsfree speakerphone capabilities will
be supported via standard, o-the-shelf
Bluetooth headset and handsfree
speakerphone systems.
The CN3 vehicle dock uses the same mounting
system (p/n 805-611-001) and vehicle power
kits (see below) as the 700 Series vehicle
dock. (5.65”L x 5.31” W x 2.84”T)
Docks and Modules Accessories
Accessory Name Part Number Description
CN
Accessories Guide
Vehicle Dock Install Kit RoHS 203-802-001 Preferred Solution. For connection of
Vehicle Dock (871-027-001) directly to
vehicle battery. Includes power cables
and cable mounting hardware. Order
instructions (962-000-021) separately.
Vehicle Dock Fuse Block Power
Kit
Vehicle Dock Serial Cable 225-737-001 Adapts CN3 Vehicle Dock Comm Connector
Cable, Power, Dock to Fuse
Block RoHS
Vehicle Dock Mounting Kit 805-611-001 Allows mounting of Vehicle Dock (871-027-
203-803-001 Provides connection to vehicle fuse block.
Requires Power Cable (226-109-003). Order
instructions (962-040-004) separately.
to RS232 Serial (DB9M) for connectivity to
serial peripherals.
226-109-003 Used with Vehicle Dock Fuse Block Power
Kit 203-803-001.
001) in route vehicle applications. Consists
of one 4¾” adjustable pivot arm with two
1½” stainless steel balls, and assembly
hardware. Due to wide range of possible
applications, this kit does not include
hardware for securing mount to vehicle.
(Same as used with 700 Series.)
Auto Adapter, V-Docks, 3S
Circular
Single USB Cable VE011-2016 Adapts CN3 Vehicle Dock Comm Connector
852-057-005 Auto Cigarette Lighter Adapter used to
power the CN3 Vehicle Dock (871-027-001).
Connects to 3-pin circular power supply
found on back of the v-dock.
to USB-A Female for connectivity to
USB peripherals. Optional: Use 203-810001 Cable Retainer Kit to secure USB
connectors.
2
Loading...