Intermec 825-199-001 Product Data Sheet
RFID-Ready Snap-On Adapter
CK
3
Accessories Guide
Accessory Name Part Number Description
IP30 Part Number
available in August
Docks and Modules
Accessory Name Part Number Description
Single Dock 871-228-001 USB Host and Client Support with bay
Multi-Dock, Ethernet
(Photo Pending)
871-229-002 4-slot Ethernet dock provides extra
Snaps onto the bottom of CK3 Series
devices as a passive UHF RFID handle.
for charging an auxiliary battery pack.
Requires Power Supply 851-061-207 and
country specific AC power cord. Optional:
Single Dock Ethernet Modules.
port allowing for ability to link up
to three (3) multi-docks. Requires
Power Supply 851-064-006 and
country-specific AC power cord.
Multi-Dock, Charge Only
(Photo Pending)
Vehicle Dock 871-231-001 Securely holds CK3 and provides
Non-Powered Vehicle Holder 871-236-001 Securely holds CK3.
IP30 Vehicle Holder
(Photo Pending)
871-229-001 Allows for charging up to 4 devices.
Requires power supply 851-064-006 and
country specific power cord.
power. Cabled RS232 (5V pwr on
pin 9) or USB Host support is also
available. Requires use of Intermec
RS232 Serial cable (p/n 225-737-001) or
Intermec USB cable (VE011-2016).
The CK3 Series vehicle dock uses the same
mounting system (p/n 805-611-001) and
vehicle power kits (p/n 851-065-105) as
the CN3 & 700 Series vehicle dock.
871-237-001 Non-Powered vehicle holder to
hold CK3 with IP30 attached.
Single Dock Ethernet Module
(Photo Pending)
871-025-101 CK3 Series Ethernet Module interfaces with
USB Host connector on Single Dock.
Holsters & Handles
CK
3
Accessories Guide
Accessory Name Part Number Description
Standard Belt Holster –
no handle
Standard Belt Holster –
with handle
Scan Handle
825-198-001 Rugged lightweight holster with belt
designed for use with handheld applications
where scan handle is not required.
825-199-001 Rugged lightweight holster with
belt designed for use with handheld
applications requiring a scan handle.
203-879-001 Customer installable scan handle
(replaces the hand strap).
Snap-On Adapters
Accessory Name Part Number Description
Snap-On RS-232 Adapter
(Photo Pending)
Snap-On Audio Adapter
(Photo Pending)
Snap-On Power Adapter
(Photo Pending)
850-815-001 Enables RS232 support from bottom
of CK3. Must order cables separately.
Adapter provides DB9M connector and 5V
power on pin-9 for tethered scanners.
850-816-001 Provides 3.5mm standard audio
jack for use of wired headset.
850-817-001
Recommended for in-field charging solutions
not requiring vehicle dock. Supports
use of auto power charger 852-043-003
or AC power supply 851-065-105.
2
Loading...