Cases and Holders
CS
40
Accessory Guide
Accessory Name Part Number Description
Holster 815-069-001
Purse
Vehicle Holder 805-675-001 Made of plastic with a spring loaded
815-071-001
High quality, black leather holster comes
with a keyed plastic insert to ensure the
antennae are facing away from the body. The
belt clip is leather wrapped and permanently
axed for horizontal attachment to a belt.
For with the standard battery pack only.
High quality, black leather purse comes with
a keyed plastic insert to ensure the antennae
are facing away from the body. On the back
side there is a leather pouch for additional
items such as business cards or keys. The strap
consists of a leather exterior with nylon interior
to decrease slip and has silver hardware. For
use with standard battery pack only.
latching mechanism for secure capture of
the CS40, the vehicle holder is designed
to present GPS directions for the user
at convenient angles using Intermec’s
standard mounting kit (below.) Other
mounting kit options (e.g. suction cup for
windshield mount, cup holder insert) are
available from RAM Mounting Systems.
For use with standard battery pack only.
Mounting Kit 805-638-001 Designed to withstand the harshest
vehicle vibration profiles, meeting or
exceeding OSHA standards, this mounting
kit consists of one 4.75” adustable pivot
arm and two 1.5” steel balls. Screws for
the holder are provided, however vehicle
mounting requires appropriate hardware
to be provided by the customer.
Batteries and Chargers
CS
40
Accessory Guide
Accessory Name Part Number Description
CS40 Universal Cell Phone
Charger Kit
Vehicle Power Adaptor 852-072-001 This vehicle power adaptor provides
Standard Battery Pack 318-045-001
203-936-001 Supporting the universal cell phone
charger standard (5V, 1A, microUSB)
this kit comes with 4 snap-on plugs
expanding the “universal” functionality
by supporting usage for the most
common outlets. More unique outlets
would require local purchase of adaptors.
This kit is included with every CS40.
protection required for large truck usage
and the spikes/surges that can occur in
vehicles. The connection is microUSB and
connects with the CS40 directly. Note
the straight portion of the cable has
been increased to accommodate easy
insertion in the CS40 while supporting
cable capture with the vehicle holder.
Standard (1430 mAh) spare
or replacement pack.
Extended Battery Pack 318-053-001
Extended (2860 mAh) spare
or replacement pack.
Docks and Modules
Accessory Name Part Number Description
CS40 USB Cradle 871-036-001 The USB cradle allows for vertical charging or
communication and eases connection to the
CS40 by utilizing the contacts on the bottom
of the CS40. A power supply is not included,
however the cradle works with the charger
and cable that ship with the CS40, p/n 203936-001; optionally, order the Y-Cable, p/n
321-674-001, for active sync and fast charge.
For use with standard battery pack only.
CS40 FlexDock Desktop Dock DX1A06E00
(no power cord)
DX1A06E10
(North American
power cord incl.)
2
The FlexDock desktop dock is designed
to provide communications and charging
for 1 CS40 and 2 spare battery packs. The
cups are interchangeable supporting future
devices from Intermec. A global power
supply is included. Part numbers ending in
“10” include a North American power cord.
Cords for other countries can be ordered
seperately. Use of a 2 meter or less USB
cable is required for ActiveSync, such as PN
236-209-001, which ships with every CS40.
For use with standard battery pack only.
Docks and Modules (continued)
CS
40
Accessory Guide
Accessory Name Part Number Description
CS40 4 Pack FlexDock Charger DX2A2EE00
(no power cord)
DX2A2EE10 (North
American power
cord incl.)
CS40 FlexDock Dual Dock
Charge only
CS40 FlexDock Dual Dock
with Ethernet
DX2A26600
(no power cord)
DX2A26610
(North American
power cord incl.)
DX2A16600
(no power cord)
DX2A16610
(North American
power cord incl.)
The FlexDock 4 pack charger is designed to
provide charging for four spare battery packs.
The cups are interchangeable supporting
future devices from Intermec. A global power
supply is included. Part numbers ending in “10”
include a North American power cord. Cords
for other countries can be ordered seperately.
For use with standard battery pack only.
The FlexDock dual dock is designed to
provide charging for 2 CS40s. The cups are
interchangeable supporting future devices
from Intermec or for providing spare battery
charging. A global power supply is included.
Part numbers ending in “10” include a
North American power cord. Cords for
other countries can be ordered seperately.
For use with standard battery pack only.
The FlexDock dual dock with Ethernet
is designed to provide wired Ethernet
communications and charging for 2 CS40s.
The cups are interchangeable supporting
future devices from Intermec or for providing
spare battery charging. A global power supply
is included. Part numbers ending in “10”
include a North American power cord. Cords
for other countries can be ordered seperately.
For use with standard battery pack only.
CS40 FlexDock Quad Dock
Charge Only
CS40 FlexDock Quad Dock
with Ethernet
CS40 FlexDock 8-Position
Battery Charger
3
DX4A2666600
(no power cord)
DX4A2666610
(North American
power cord incl.)
DX4A1666600
(no power cord)
DX4A1666610
(North American
power cord incl.)
DX4A2EEEE00
(no power cord)
DX4A2EEEE10
(North American
power cord incl.)
The FlexDock quad dock is designed to
provide charging for 4 CS40s. The cups are
interchangeable supporting future devices
from Intermec or for providing spare battery
charging. A global power supply is included.
Part numbers ending in “10” include a
North American power cord. Cords for
other countries can be ordered seperately.
For use with standard battery pack only.
The FlexDock quad dock with Ethernet
is designed to provide wired Ethernet
communications and charging for 4 CS40s.
The cups are interchangeable supporting
future devices from Intermec or for providing
spare battery charging. A global power supply
is included. Part numbers ending in “10”
include a North American power cord. Cords
for other countries can be ordered seperately.
For use with standard battery pack only.
The FlexDock 8 position charger is designed to
provide charging for 8 spare battery packs. The
cups are interchangeable supporting future
devices from Intermec. A global power supply
is included. Part numbers ending in “10”
include a North American power cord. Cords
for other countries can be ordered seperately.
For use with standard battery pack only.
Power Cords
CS
40
Accessory Guide
Accessory Name Part Number Description
AC Power Cord 321-470-001
321-500-001
071918
1-974027-025
1-947028-025
1-974029-020
1-974030-025
321-471-002
321-501-002
321-502-002
Data Cables
Accessory Name Part Number Description
Y cable 321-674-001 The Y-Cable is designed for the CS40 to
AC Power Cord, Switzerland
AC Power Cord, Japan
AC Power Cord, China RoHS
AC Power Cord, Europe RoHS
AC Power Cord, US RoHS
AC Power Cord, UK RoHS
AC Power Cord, Austrialia RoHS
AC Power Cord, Italy RoHS
AC Power Cord, Denmark RoHS
AC Power Cord, India/S Africa RoHS
provide both fast charge as well as active
sync communications. Most PC’s provide
only 500 mA (trickle charge when the unit
is on) and the CS40 needs 1A to achieve
fast charge rates. Connect the red to power
and the black to the PC for fast charge and
active sync. The cable will not work if either
power or data are not connected. This listed
part number is for the cable only as the
power supply is included with every CS40.
Spare MicroUSB to USB Host Cable 236-209-001 One cable is included in the universal
cell phone charger kit that is included
with every CS40. This is a standard cable
and can be used to directly connect the
CS40 to a PC, however does not enable
fast charge capabilities. See above.
4
Replacement Parts
CS
40
Accessory Guide
Accessory Name Part Number Description
Screen Protectors (3/pk) 346-069-038 Contains three (3) self-adhesive screen
protectors and touch panel cleaner.
MicroUSB Caps (3/pk) 203-939-001 With prolonged usage the microUSB cap
on the CS40 will tear or become hard and
will no longer seal the connector. This kit
contains three (3) caps and the phillips
head screws and washers necessary to
replace the microUSB cap on the CS40.
Tethered Pens (3/pk) 203-940-001 Contains three (3) replacement styli
with single strand tether for the CS40.
Micro SD Card, 1GB
Micro SD Card, 2GB
Micro SD Card, 4GB
856-065-004 Industrial Grade Micro SD card for
reliable performance in all CS40
operating environments
856-065-005 Industrial Grade Micro SD card for
reliable performance in all CS40
operating environments
856-065-006 Industrial Grade Micro SD card for
reliable performance in all CS40
operating environments
Copy right © 20 13 Interme c
Technologies Corporation. All
righ ts reser ved. Inter mec is a
regi stered tr ademark of In termec
Technologies Corporation. All
other t rademark s are the prop erty
of thei r respect ive owner s.
612117-B 08/13
5
Loading...