Intermec 700 Series 700, 700 Series 700CNI, 700 Series 730B, 741A, 751B Instructions Manual

Instructions

P/N 962-054-044

Revision B

August 2006

700 Mobile Computer Scanner H andle

P/N 962054044B

*962054044B*

Assembly Diagram

The 714-502-004 Kit includes:

" Scanner Handle
" Two #6--32 custom handle-to-computer retaining screws

Insert 700 Mobile Computer in Scanner Handle by

1

sliding in as shown by the pointer arrow.

The Scanner Handle Assembly provides access to the
connectors on the bottom of the Mobile Computer.

If using the retaining screws, it’s recommended to

2

unhook the hand strap from the back of the Mobile
Computer. This allows access to the battery pack
without removing the computer from Scanner
Handle.

Turn the Scanner Handle assembly over to insert
the two Mobile Computer retaining screws.

Retaining screws (one on each side)

If using a handle strap attached to the Scanner Handle,

3

install an eye-hook type that snaps over the pin on the
Scanner Handle.

Handle strap pin