WF511
GENERAL INSTRUCTIONS FOR FIBER OPTIC LED WATERFALL
1. Unpack the product, wipe off dust with a damp cloth. Take out all
ccessories: Abag of small stones, pumpand adapter assembly.
a
2. Familiarize yourself with the pump. The switch located at the front of
it controls the water flow. The flow is indicated by a max and min sign.
To increase flow, move switch in the direction of max. To decrease flow,
move the switch toward min.
FEATURES:
Unique water design-illuminated streams of water create a unique
visual display.
Special effects lighting illuminates fountain in red, blue and green for
a more dramatic effect.
A few white bright fiber optic set on the background has a twinkling star
effect to remind you of a tranquil sky in the evening while water is
still falling.
The soothing sound of illuminated streams of water can make you feel
everything is silent except the sound of water.
Improve concentration by masking distractions so you can stay focused.
Innovative, artistic design enhances the environment at home or at work.
Durable electrical water pump can be operated from any indoor
electrical outlet.
CAUTION: This pump has been evaluated for use with water only.
NOTE: It is recommended the pump be set at its highest
flow during assembly and later adjusted to a lower setting
if desired. Be sure to unplug pump before adjusting flow
setting.
WARNING: RISK OF ELECTRICAL SHOCK
• Do not connect to any voltage other than that shown on the pump.
• This pump is supplied with a grounding conductor and grounding-type
attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded,
grounding-type receptacle.
The national electric code requires that a ground fault circuit interrupter (GFCI) be used in the branch circuit
•
supplying fountain pumps and other pond equipment. See your electrical supplies dealer for this device.
• If the supply cable is damaged it can not be replaced and the pump unit should be discarded.
ARNING: RISK OF FIRE
W
• Do not use with water above 30˚C.
• Do not pump flammable liquids.
3. Lead the cord through the cord slot on the bottom of the base. This will ensure that the unit is balanced when placed
on a flat surface.
power cord.
NOTE: Do not let pump run when NOT submerged in water. Doing so may damage the pump. Always submerge
the pump in water first, and then plug in the unit.
Fill base with distilled water to approximately 1/2" above pump. Use distilled water only
4.
deposits that will result in the corruption of the Waterfall and pump.
5. Place the top of Waterfall on base properly.
6. Plug adapter into 120V household outlet.
WARNING: This is not a toy. To avoid danger of choking keep small stones away from Children and Pets.
The product is designed for indoor use only. Do not use outdoors.
Attach the pump to the connector tube on the W
DO NOT plug into outlet at this time.
aterfall and attach the
AC adapter jack to the base
Tap water will create mineral
.
NOTE: Ensure that the electrical cord loop is below the electrical outlet.” This will prevent water from running
down the cord into the electrical outlet.
MAINTAINING CLEANLINESS AND LIFE OF WATERFALL & PUMP
1. Ensure water pump is kept clean and free of debris. We recommend
using distilled water with this product.
OTE: To clean pump, first make sure pump is UNPLUGGED
N
from 120V circuit and remove front plate. Check for and
remove dirt and debris from impeller. Reassemble.
. Periodically change water and clean the structure of the waterfall
2
ith a mixture of vinegar and cold clean water.
w
3. Add water to waterfall periodically to keep water level at an optimum
level (approximately 1/2” above pump) to avoid shortening the life of
Regulator
Impeller Holder
Front Plate
Seal Ring
Impeller
Shaft
the pump. Water level should completely cover pump at all times.
NOTE: Never let the pump run dry. This will shorten the life of the pump.
4. To store waterfall after use, unplug the waterfall from the electrical outlet, empty the water, and store in a cool dry
place.
Motorhead
Suction Bracket
TROUBLESHOOTING
1. If jets do not spray correctly, check water level and add if necessary or clean jet holes to unclog any deposits.
2. If pump fails to operate, check the circuit breaker, or try a different outlet to make sure the pump is getting electrical
power.
3. If the pump gurgles, spews, or “burps”, check the water level to make sure the pump has enough water to function.
4. If water is splashing outside of the waterfall, adjust the flow control valve to a lower setting.
LIMITED ONE YEAR WARRANTY
If within one (1) year from the date of purchase, this product fails due to a defect in material or workmanship, Intermatic Incorporated will
repair or replace it, at its sole option, free of charge. This warranty is extended to the original household purchaser only and is not
transferable. This warranty does not apply to: (a) damage to units caused by accident, dropping or abuse in handling, acts of God or any
negligent use; (b) units which have been subject to unauthorized repair, opened, taken apart or otherwise modified; (c) units not used in
accordance with instructions; (d) damages exceeding the cost of the product; (e) sealed lamps and/or lamp bulbs, LED’s and batteries; (f)
the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear; (g) transit damage,
initial installation costs, removal costs, or reinstallation costs.
INTERMATIC INCORPORATED WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT
ALLOW THE EXCLUSION OR LIMITA
EXCLUSION MAY
IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY MODIFIED TO EXIST ONLY AS CONTAINED IN THIS LIMITED WARRANTY, AND SHALL BE
OF THE SAME DURATION AS THE WARRANTY PERIOD STATED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON THE
DURATION OF AN IMPLIED WARRANTY, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
This warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased, or (b) mailing the
product, along with proof of purchase, postage prepaid to the authorized service center listed below. This warranty is made by: Intermatic
Incorporated/After Sales Service/7777 Winn Rd., Spring Grove, Illinois 60081-9698/815-675-7000 http://www.intermatic.com Please be
sure to wrap the product securely to avoid shipping damage.
NOT APPLY TO YOU. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES. ALL
TION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
AUTHORIZED SERVICE CENTER
Intermatic Incorporated
After Sales Service
7777 Winn Road
Spring Grove, IL 60081-9698
158WF12677