Page 1
V2-N
Series
Professional network power amplier
www.cona.co.kr
Page 2
V2-N
Series
Professional network power amplier
Page 3
1. V2-N
Series
Features
2. V2-N
3. V2-N
4. V2-N
V2-1000N · V2-2000N · V2-3000N · V2-4000N
Series
Series
Series
Control S/W G.U.I
Applications
Specication
High-output power amplier with network control
The CONA V2-N series amplifiers are remote controlled using UTP (CAT-5E)
Standard Ethernet cabling via TCP/IP Network protocol. Designed to be compact in
appearance the V2-N series ampliers deliver high power output with high eciency,
low power consumption and low heat dissipation.
Page 4
Eco-Friendly
Remote PC control of volume level and power on/off as well as monitoring
of amplier power and operating conditions reduces power consumption
for an Eco-friendly environment.
Wired or wireless network control
Remote control is as simple as connecting a UTP (CAT-5E) Standard
Ethernet cable to TCP/IP network. The dedicated GUI software easily nds
and connects to the amplier.
Software control
V2-N control software can remotely Power the amplifier On and Off set
volume and monitor amplier output voltage as well as current status.
1. V2-N Series
Features
Excellent response characteristics and S / N ratio
※
Total harmonic distortion stands. The lower THD means that the equipment
The V2-N has a damping factor of better than 400, a THD of less than
0.05% THD, and a S/N ratio greater than 105dB giving it great tone and
high-resolution sound.
50Hz HPF selection
A 50Hz High Pass Filter removes unnecessary base protecting speakers
preventing loss of phase.
T H D :
produces a more accurate reproduction by reducing harmonics added by
electronics and audio media.
※
S/N Ratio :
Stands for Signal to Noise Ratio expressed in dB. It is a measurement that
compares the level of a desired signal to the level of background noise. It is
dened as the ratio of signal power to the noise power. The higher the ratio
indicates more signal than noise.
Clip Limiter
A Clip Limiter can be set on or off to prevent output distortion and protects
against equipment damage.
Class-H Technology
Class H 2 tier linear design ensures ruler-at response, transparency and
detail while minimizing loss.
04 CONA Professional
Page 5
Technical Specication and features
CONA V2-N series :
Power, Pristine Audio Quality and Reliability
power ampliers delivering quality reliable audio performance with sonic perfection.
The latest technology in amplier design is delivering ultimate power output while protecting
the entire system. High-performance and high-quality with clean and precise power makes
this amplifier ideal for voice and all styles of music. Perfect for portable live sound and
installed sound applications, including outdoor events, stadiums and arenas, casinos,
nightclubs, restaurants, hotels, houses of worship, corporate campuses and convention
centers.
V2-N series ampliers are compact, lightweight, high-eciency, two-channel, high
Professional networking power amplifier
V2-1000N · V2-2000N · V2-3000N · V2-4000N
Input Gain Sensitivity
A 3 position input gain sensitivity selector allows for matching of amplier input to a variety of
sources.
Circuit Protection
Designed to operate under extreme conditions, a variety of protection circuitry is built into the
V2-N series ampliers such as DC Protection, over-temperature protection, and short-circuit.
This ensures stability of the equipment.
SMPS - Switch mode power supply provides high
efciency and low weigh
SMPS - Switch mode power supply provides high efficiency and low weigh. Among their
advantages is their reduced physical size, only 2 RU and lower heat dissipation. SMPS offer
greater than 90% power efciency and reduced power consumption over traditional ampliers.
Easy to remove
Forced air cooled, from front to back with easy access removable dust filter offer easy
maintenance and improving performance, efciency and extending product life.
and clean dust filter
05
Page 6
2. V2-N Series
Control S/W G.U.I
Amplier Network Control And Setup Software
The software will display
equipment operating mode
and monitor system status.
Equipment vcan display
equipment by name, group or
system wide.
Auto scan feature
The V2-N network amplifier can
be remotely controlled via TCP/IP
network using the included GUI
Software. Easy Set-Up allows for
automatic SCAN and detection
of amplifiers on the network.
Manual loading of amplifiers is
also possible.
The Software is
compatible with
all inter-M network
ampliers.
The information
displayed will
vary according to
amplier models.
06 CONA Professional
Page 7
Professional networking power amplifier
V2-1000N · V2-2000N · V2-3000N · V2-4000N
Operating mode
A user-friendly GUI facilitates setting amplier modes, controlling and monitoring of the amplier with a
simple button click.
General Information
The Software will display Information such as Equipment model number, IP address, Power Status (including
online status, HPF filter on and clip protection), Volume levels, and amplifier mode. Amplifier operating
conditions including Amplier output voltage level, output current level and amplier’s internal temperature can
also be monitored.
1)
Device model information
2)
Power status
3) Volume information
Amplier features and information are displayed and congurable.
4)
Amplier status
5)
Amp mode
6)
Operating Status
▶ ONLINE ▶ HPF ▶ CLIP/PROT
▶ MODE ▶ GAIN
▶ Voltage ▶ Curren ▶ Temp
07
Page 8
2. V2-N Series
Control S/W G.U.I
Equipment detail View
1)
Details
This view will display, the channel name, amplier rmware version, Remarks.
2)
History view
Graphical representation of changes in amplier operation.
Graphical representation of variation in Temperature, output wattage, output current, and output voltage (level).
Additional equipment information is available by a simple click of a button. The
information screen will display details such as amplier model number, channel
name, and rmware version number. A graphical representation of the amplier
history is also displayed showing changes in output wattage, output voltage
output current and temperature.
LOG Information
Simple single button click allow to the user to view the amplier log le.
Amplifier LOG information is stored and updated for operator reference and
maintenance purposes
.
08 CONA Professional
Page 9
3. V2-N Series
Applications
Multi-story
complex
8F
7F
6F
5F
4F
3F
2F
1F
B1F
Gym
Auditorium
Seminar Room
Seminar Room
Seminar Room
Meeting Room
Meeting Room
Cafeteria
Auditorium
Seminar Room
Seminar Room
Meeting Room
Meeting Room
Control Room
PC
Stadium
application
Amp Room
Network
FOH - Main control Room
09
Page 10
4. V2-N Series
AC CORDGAIN
SELECT SWITCH
INPUT
CONNECTORS
CLIP
LIMITER
HPF
SELECT SWITCH
SPEAKER OUTPUT CONNECTORS
MODE SELECT SWITCH
Specification
V2-1000N V2-2000N V2-3000N V2-4000N
STEREO 8Ω (1kHz, THD 1%)
STEREO 4Ω (1kHz, THD 1%)
STEREO 2Ω (1kHz, THD 1%)
BRIDGED 8Ω (1kHz, THD 1%)
BRIDGED 4Ω (1kHz, THD 1%)
DAMPING FACTOR
REMOTE CONTROL
POWER SOURCE
POWER CONSUMPTION
(1/8 power @4Ω)
S/N (@8Ω)
WEIGHT (SET)
DIMENSIONS (SET)
V2-N Series
170W
300W
550W
650W
1100W
≥380
7A 4A 6A 7A
10.7kg / 23.6 Ib
280W
500W
850W
1000W
1700W
≥400
500W
900W
1500W
1800W
3000W
≥400
Standard Ethernet TCP / IP
(10/100 Base TX), RJ-45 Port
AC 110V / AC 220V, 60Hz
106dB
10.9kg / 24 Ib
12kg / 26.4 Ib
482(W) x 88(H) x 407(D)mm / 19(W) x 3.5(H) x 16(D)in
440
700W
1200W
1900W
2400W
3800W
≥400
12.1kg / 26.7 Ib
V2-1000N · V2-2000N
V2-3000N · V2-4000N
·
Amplier status such as Output voltage, protection
circuit, internal temperature and current conditions
can be remotely monitored using the Network
Control Software.
·
Network Remote control of the amplier functions
such power on, Mute, volume level and other is
made possible using the Network Control Software.
·
Amplier IP address can be set via three rotary DIP
Switches.
·
TCP/IP Network remote control using Standard
UTP Cable and RJ45 Terminal.
·Included
(Windows 7 Compatible)
Network remote control Software.
10 CONA Professional
369 39
482
88
Page 11
Professional networking power amplifier
V2-1000N · V2-2000N · V2-3000N · V2-4000N
Front panel controls
1
2 3 4 5 76
1.
Front Hanldes or Grip (removable)
2.
Dust Filter replacement access
3. Volume Control
4.
Signal level LED indicator
5.
Clip / Protection LED Indicator
6.
Power LED Indicator
7.
Power Switch
Rear panel controls
1 2 43 5 6 7 8 9
1.
AC Cord
2.
Speaker output connector
3.
IP Adress Setup switch
4.
Ethernet Port
5.
Euroblock input connector
6.
1/4 TRS / XLR-F Combination Jack
7.
3 position Input Gain Selector switch
8.
Bridge/stereo/Parallel mode selector switch
9.
50Hz High Pass Filter selector switch
11
Page 12
V2-N
Professional network power amplier
V2-1000N
V2-2000N
V2-3000N
V2-4000N
Series
Loading...