Inter-M VHD-300, SB-304HD, SB-300HD Brochure

AV

SOLUTION

CV-400 / VHD-300 / HDMX-1104

SB-300HD /SB-304HD / SB-305

The signal wire and convertor of AV

INPUT

YPbPr
Or
CVBS

INPUT

SDI

INPUT

HDMI
DVI

Analog Matrix Switcher

SDI Switcher

HDMI/DVI Switcher

OUTPUT

YPbPr
Or
CVBS

OUTPUT

SDI : until 100m

OUTPUT

HDMI: until 30m
DVI

INPUT

SDI

INPUT

HDMI

SDI/ HDMI mixed Switcher

OUTPUT

SDI

OUTPUT

HDMI

▶ The timing and pixel of signal are not changed because the switcher can connect the input signal

with output signal directly.

SDI : Up to 100 M can be expended by one line

HDMI : One line can make expending up to 30m.

Composition of system

The several cameras on input part, blue-ray, DVD. PC and store record of HDD are composed.

The input signal is connected with matrix switcher

On matrix switcher, the output is connect with media mixer and the output of mixer be sent to the

part of transmission.

Also, the output of mixer can be changed to input of matrix switcher again and it can be used

transmission that can be selected between source output and mixing output.

This transmission part can be separated two parts such as TCP/IP part and RF part.

There are VHD-300 that transmits one channel and the multi-transmission CV-400 which can trans-

mit four channels.

The RF transmission instrument, can be used for using of the coaxial cable that is already installed.

The SETTOP BOX is needed for restoration of screen from transmission signal in TCP/IP method. And

this SETTOP box can be also applied to double way transmission.

2

In case of HDMS-0808 Matrix

INPUT

YPbPr
Or
CVBS

INPUT

YPbPr
Or
CVBS

SDI Switcher

OUTPUT

YPbPr
Or
CVBS

OUTPUT

YPbPr
Or
CVBS

The convertor which SDI is used is needed because the pixel can be decreased if the distance of

HDMS-0808 matrix Switcher is over 70m (3C-2C) ~ 100m(5C~2V) and the Inter-M can be supplied

about the convertor that is depended on the purpose.

INPUT

SDI

OUTPUT

SDI : until 200m

The HDMS-0808 that is used analog system of input and output can use 8 channel of component

video or 8 channel of CVBS in SD level.

Frequency band and transmission distance
of various video signal

Using cable : 5C-2V, 5C-FB

Video signal Frequency band Transmission distance Various connector

CVBS (SD)

~4.5MHz(360TVC)

7MHz(560TVC)

300m (5C-2V), 450m (5C-FB)
270m (5C-2V), 350m (5C-FB)

BNC or RCA Jack

image

quality

HD-Y, Pb, Pr ~ 35MHz 100m (5C-2V), 150m (5C-FB) BNC or RCA Jack

HD-SDI 1.485Gbps 70m (5C-2V), 100m (5C-FB) BNC

HDMI 165Mbps 10~30m HDMI

DVI 165Mbps 10~30m DVI

The appropriated signal convertor needs to be used when the instrument used by SDI/ HDMI signal is

connected because HDMS-0808 is analog component signal.

The transmission method of RF

x

○

◎

◎

◎

number
of cable

1C

3C

1C

1C

C

1

One transmission of image can be transmitted on one channel using by the channel of MATV (54MHz

(2CH)) ~ 806MHz 69CH)), CATV (54MHz (2CH)) ~ 660MHz 102CH)) that is not used.

※ RF Frequency vange depends on country requirements.

3

The characteristic table of image signal

YPbPr

SDI

Convertor

AUDIO

HDC-S2HA

HDMI

Convertor

AUDIO

YPbPr

Convertor

AUDIO

SDI

HDC-HA2SH

HDMI

SDI

HDC-YA2SH

DHMI

YPbPr

HDMI HDC-H2YA

Convertor

AUDIO

SDI YPbPr

HDMX-1104

At the connection of HDMX-1104 and HDMI of CV-400, the format ( 4:4:4 4:2:2 ) of RGB color is not

matched so it should be used SDI to YPbPr convertor.

4

Convertor

CV-400

VHD-300