Inter-m FT-100M, FT-100S, FR-100M, FR-100S Operation Manual

Download

Operation Manual

* Rack mount products in the Western Hemisphere(North America, South America,

and the Caribbean) do not have handles installed due to customer preference.

MULTI-MODE OPTIC TRANSMITTER / RECEIVER

SINGLE-MODE OPTIC TRANSMITTER / RECEIVER

FT(FR)-100M / FT(FR)-100S

Welcome

A personal welcome to you from the management and employees of Inter-M

All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products.

We sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete satisfaction, we will endeavor to make things right.

Welcome to Inter-M, and thank you for becoming part of our worldwide extended family!

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

*WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING-WATER AND MOISTURE: Unit should not be used near water(e.g.

near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so than objects do not fall and liquids are not spilled into the enclosure through openings.

*CLASS 2 WIRING (Adjacent to speaker terminal): The speaker output of this apparatus can exceed 10 Watts and could be a shock injury.

Connection to speakers should be performed by a skilled person. *Do not install this equipment in a confined space such as a book case or similar unit. *This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such vases, shall be placed on the apparatus. *This apparatus shall be connected to a mains socket outlet with a protective earthing connection. *

It has heed to be easy to disconnect the device. To disconnect the device from power, separate AC input cable from inlet or unplug the AC Cord.

CAUTION

*These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing

other than that contained in the operating instructions unless you are qualified to do so."

NOTE *This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expense.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance.

Caution: To prevent electric shock do not use this (polarized) plug with

an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

Attentions: Pour prévenir les chocs électriques ne pas utiliser cette

fiche polarisée avec un prolongateur, une prise de courant on une autre sortie de courant, sauf si les lames peuvent étre insérées à fond sans en laisser aucune partie à découvert.

MULTI-MODE OPTIC TRANSMITTER / RECEIVER SINGLE-MODE OPTIC TRANSMITTER / RECEIVER

FT(FR)-100M / FT(FR)-100S

Contents

Unpacking .......................................................................................................................................2

Installation

Environment....................................................................................................................................2

Important Safety Instructions.............................................................................................................2

System Summary and Installation ............................................................................................3

Features............................................................................................................................................4

Front.Rear Panel.............................................................................................................................5

Specifications ..................................................................................................................................6

Dimensions.....................................................................................................................................7

Service

Procedures......................................................................................................................................8

Variations and Options .................................................................................................................8

Variations.......................................................................................................................................8

Options ..........................................................................................................................................8

Warranty .........................................................................................................................................8

MULTI-MODE OPTIC TRANSMITTER / RECEIVER

SINGLE-MODE OPTIC TRANSMITTER / RECEIVER

Unpacking

FT(FR)-100M / FT(FR)-100S

Unpacking

Although your RG-616 is neither complicated nor difficult to operate, we recommend you take a few minutes to read this brief manual and familiarize yourself with the important information regarding product features, setup and operation.

As with most electronic devices, we strongly recommend you retain the original packaging. In the unlikely event the product must be returned for servicing, the original packaging (or reasonable equivalent) is required.

Installation

Environment

Never place this product in an environment which could alter its performance or reduce its service life. Such environments usually include high levels of heat, dust, moisture, and vibration.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

S3125A

MULTI-MODE OPTIC TRANSMITTER / RECEIVER SINGLE-MODE OPTIC TRANSMITTER / RECEIVER

FT(FR)-100M / FT(FR)-100S

System Summary and Installation

- FT-100M / FT-100S / FR-100S / FR-100M IS LONG DISTANCE TRANSMISSION SYSTEM FOR SI-100, SA-300, PP-100 AND SP-100 UTP OUTPUT BY FIBER OPTIC SIGNAL PROCESS

MULTI-MODE OPTIC TRANSMITTER / RECEIVER

SINGLE-MODE OPTIC TRANSMITTER / RECEIVER

Function

Cable Model Name

Description

Single-Mode FT-100S

Single-Mode Transmission Product

Multi-Mode FT-100M

Multi-Mode Transmission Product

Single-Mode FR-100S

Single-Mode Receiving Product

Multi-Mode FR-100M

Multi-Mode Receiving Product

TX RX

- STRONGLY RECOMMEND TO USE SUITABLE FIBER OPTIC CABLE FOR THE PRODUCT

FT(FR)-100M / FT(FR)-100S

MULTI-MODE OPTIC TRANSMITTER / RECEIVER SINGLE-MODE OPTIC TRANSMITTER / RECEIVER

Features

- FULL-DUPLEX TRANSMISSION BY 1 CORE FIBER CABLE.

- TRANSMIT AUDIO 8CH AND CONTROL SIGNAL AT THE SAME TIME. 6CH TRANSMISSION AVAILABLE IN SI-100, SA-300

- COMMUNICATION STATUS MONITORING BY FRONT LED DISPLAY

FT(FR)-100M / FT(FR)-100S

Front.Rear Panel

1. Display power ON/OFF

2. Display data to be transmitted

3. Display data to be received

4. It turns on when transmit unit and receipt unit are connected via fiber cable

Only in case between SI-100/SA-300 and PP-100/SP-100 are connected completely LED of receipt units turn on

5. Fiber Adapter Terminal - SC Type. If the type of terminal is different in between SC type and FDF

system, please prepare additional dumper cord separately and make connection

6. UTP connection Terminal. This is for SI-100/SA-300, SP-100 and PP-100 Inter-M system and cable

connection by Direct-LAN cable. – Cross cable creates operation failure of the system

7. DC 12V adopter power connection terminal

8. System power switch

NOTE : If there is a strong power noise of installation circumstance, please wrap UPT cable once with

Ferrite Core which supplied with product to reduce the noise

MULTI-MODE OPTIC TRANSMITTER / RECEIVER

SINGLE-MODE OPTIC TRANSMITTER / RECEIVER

2 3 4

6 7 8

FT(FR)-100M / FT(FR)-100S

MULTI-MODE OPTIC TRANSMITTER / RECEIVER SINGLE-MODE OPTIC TRANSMITTER / RECEIVER

* Caution - If audio sound bread out or cut, please check fiber cable and UTP terminal connection status.

Also check connection distance of cable with maximum distance standard.

Specifications

Optical Specifications

Fiber Type

Number of Fiber

Wavelength (nm)

Distance (max)

Connector

Module Specifications

Operation Mode

Data Rate

Bit Error Rate

Power

Operation Temp

Humidity

Size

Weight

Multi-Mode

1310 / 1550

2km

Single-Mode

1310 / 1550

15km

Multi-Mode

1550 / 1310

2km

Single-Mode

1550 / 1310

15km

SC type

FULL-Duplex

12.5Mhz(RS422, Max 19200BPS)

-9

12V / 1A

(-10℃ ~ + 40℃)

30% ~ 85%

482mm(L) X 234mm(W) X 44mm(H) 1U

2.3Kg

FT-100M

FT-100S FR-100M FR-100S

Specification

FT(FR)-100M / FT(FR)-100S

MULTI-MODE OPTIC TRANSMITTER / RECEIVER

SINGLE-MODE OPTIC TRANSMITTER / RECEIVER

※ DIMENSIONS

MULTI-MODE OPTIC TRANSMITTER / RECEIVER SINGLE-MODE OPTIC TRANSMITTER / RECEIVER

FT(FR)-100M / FT(FR)-100S

Service

Procedures

Take steps to insure the problem is not related to operator error or other products within the system. Information provided in the troubleshooting portion of this manual may help with this process. Once it is certain that the problem is related to the product contact your warranty provider as described in the warranty section of this manual.

Schematic

A Schematic is available by contacting your warranty provider.

Parts List

A Parts List is available by contacting your warranty provider.

Warranty

Warranty terms and conditions vary by country and may not be the same for all products. Terms and conditions of warranty for a given product may be determined first by locating the appropriate country which the product was purchased in, then by locating the product type.

To obtain specific warranty information and available service locations contact Inter-M directly or the authorized Inter-M Distributor for your specific country or region.

Variations and Options

Variations

Variations of this product exist to reflect the variations in AC power requirements throughout the world. Product supplied through local sources are compatible with local AC power requirements.

Options

No optional items are available for this product.

MADE IN KOREA

August 2010 126855

Inter-M, Ltd. (Korea) began operations in 1983.

Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world.

Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).

The company is no longer just a Korean company, but rather a global company that is truly international in scope, with factories and offices in Korea and China, and sales and marketing operations located in Japan, Europe, and the U.S.A.

With more than 850 employees around the globe, Inter-M is well-poised for further growth and expansion.

Inter-M Americas, Inc.

13875 Artesia Blvd. Cerritos, CA 90703 USA TEL : +1-562-921-0313, FAX : +1-562-921-0370 Home Page : http://www.inter-m.net, E-mail : info@inter-m.net

Inter-M Corporation

Seoul OFFICE:653-5 BANGHAK-DONG, DOBONG-KU, SEOUL, KOREA TEL : +82-2-2289-8140~8, FAX : +82-2-2289-8149 Home Page : http://www.inter-m.com, E-mail : overseas@inter-m.com

Inter-m FT-100M, FT-100S, FR-100M, FR-100S Operation Manual

Specifications and Main Features

Frequently Asked Questions

User Manual