Inter-M DPA-430H User Manual

Operation Manual
Multi Channel Power Amplifier
DPA-430H
MULTI CHANNEL POWER AMPLIFIER
Welcome
Welcome
A personal welcome to you from the management and employees of Inter-M
All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products.
Welcome to Inter-M, and thank you for becoming part of our worldwide extended family!
This symbol is intend ed to aler t the user to the
CAutION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Caution: To prevent electric shock do not use this (polarized) plug with
Attentions: Pour prévenir les chocs électriques ne pas utiliser cette
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
*WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING-WATER AND MOISTURE: Unit should not be used near water(e.g.
near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so than objects do not fall and liquids are not spilled into the enclosure through openings.
*CLASS 2 WIRING (Adjacent to speaker terminal): The speaker output of this apparatus can exceed 10 Watts and could be a shock injury.
Connection to speakers should be performed by a skilled person. *Do not install this equipment in a confined space such as a book case or similar unit. *This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such vases, shall be placed on the apparatus. *This apparatus shall be connected to a mains socket outlet with a protective earthing connection.
It has heed to be easy to disconnect the device. To disconnect the device from power, separate AC input cable from inlet or unplug the AC Cord.
* *
The socket-outlet shall be installed near the equipment and shall be easily accessible.
CAutION
*These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you are qualified to do so.
NOtE *This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
presence of uninsulated “dangerous voltage” within the prod uct’s enclos ure t hat m ay be of suffi cient magnitude to constitute a risk of electric shock to persons.
This symbol is intend ed to aler t the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance.
an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.
fiche polarisée avec un prolongateur, une prise de courant on une autre sortie de courant, sauf si les lames peuvent étre insérées à fon d sa ns en laisser auc une par tie à découvert.
MULTI CHANNEL POWER AMPLIFIER
Contents
Contents
Unpacking .......................................................................................................................................2
Installation
Environment....................................................................................................................................2
Important Safety Instructions.............................................................................................................2
Features............................................................................................................................................3
Accessories.....................................................................................................................................3
Precautions......................................................................................................................................4
Installation Precautions .................................................................................................................4
Front Panel ......................................................................................................................................5
Rear Panel .......................................................................................................................................7
Volume Range Setting ...................................................................................................................8
Connecting Speakers.....................................................................................................................9
Applications ..................................................................................................................................10
Block Diagram ..............................................................................................................................11
Specifications ................................................................................................................................12
Dimensions ...................................................................................................................................13
Service............................................................................................................................................14
Variations and Options ...............................................................................................................14
Warranty .......................................................................................................................................14
DPA-430H
1
MULTI CHANNEL POWER AMPLIFIER
S3125A
Unpacking
Unpacking
Although your DPA-430H is neither complicated nor difficult to operate, we recommend you take a few minutes to read this brief manual and familiarize yourself with the important information regarding product features, setup and operation.
As with most electronic devices, we strongly recommend you to retain the original packaging. In the unlikely event the product must be returned for servicing, the original packaging (or reasonable equivalent) is required.
Installation
Installation
Environment
Never place this product in an environment which could alter its performance or reduce its service life. Such environments usually include high levels of heat, dust, moisture, and vibration.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
S3125A
2
DPA-430H
MULTI CHANNEL POWER AMPLIFIER
Features
Features
Features
- 1U Rack Size
- Multi channel power amplifier, 300W x 4 channel (100V/33.3 or 70V/16.3)
- Independent SMPS power supply for each channel
- Low power consumption, low heat dissipation and light weight
- High pass filter switch (–3dB at 65Hz/400Hz)
- Protection circuitry (over heat, over current, speaker short, DC output)
- Balanced input
Accessories
- AC power cord x1
- 3P Terminal Block x 4
- 2P Terminal Block x 4
- Rack mount screws x 4
- Foot x 4
DPA-430H
3
MULTI CHANNEL POWER AMPLIFIER
Blank panel
POWER
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
4
00Hz 65Hz
4
00Hz 65Hz
4
00Hz 65Hz
4
00Hz 65Hz
CH 1
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
CH 2
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
CH 3
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
CH 4
POWER
P
ROT
VOLUME
MIN MAX
HPF
C
LIP-10dB -30dB
400Hz
6
5Hz
400Hz
6
5Hz
400Hz
6
5Hz
400Hz
6
5Hz
CH 1
P
ROT
VOLUME
MIN MAX
HPF
C
LIP-10dB-30dB
CH 2
P
ROT
VOLUME
MIN MAX
HPF
C
LIP-10dB-30dB
CH 3
P
ROT
VOLUME
MIN MAX
HPF
C
LIP-10dB-30dB
CH 4
POWER
P
ROT
VOLUME
MIN MAX
HPF
C
LIP-10dB -30dB
400Hz 65Hz
400Hz 65Hz
400Hz 65Hz
400Hz 65Hz
CH 1
P
ROT
VOLUME
MIN MAX
HPF
C
LIP-10dB-30dB
CH 2
P
ROT
VOLUME
MIN MAX
HPF
C
LIP-10dB-30dB
CH 3
P
ROT
VOLUME
MIN MAX
HPF
C
LIP-10dB-30dB
CH 4
POWER
P
ROT
VOLUME
MIN MAX
HPF
C
LIP-10dB -30dB
400Hz
6
5Hz
400Hz
6
5Hz
400Hz
6
5Hz
400Hz
6
5Hz
C
H 1
P
ROT
VOLUME
MIN MAX
HPF
C
LIP-10dB-30dB
C
H 2
P
ROT
VOLUME
MIN MAX
HPF
C
LIP-10dB-30dB
C
H 3
P
ROT
VOLUME
MIN MAX
HPF
C
LIP-10dB-30dB
C
H 4
POWER
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
400Hz 65Hz
400Hz 65Hz
400Hz 65Hz
400Hz 65Hz
C
H 1
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
C
H 2
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
C
H 3
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
C
H 4
POWER
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
4
00Hz 65Hz
4
00Hz 65Hz
4
00Hz 65Hz
4
00Hz 65Hz
CH 1
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
CH 2
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
CH 3
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
CH 4
POWER
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
4
00Hz 65Hz
4
00Hz 65Hz
4
00Hz 65Hz
4
00Hz 65Hz
CH 1
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
CH 2
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
CH 3
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
CH 4
POWER
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
400Hz 65Hz
400Hz 65Hz
400Hz 65Hz
400Hz 65Hz
CH 1
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
CH 2
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
CH 3
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
CH 4
POWER
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
400Hz 65Hz
400Hz 65Hz
400Hz 65Hz
400Hz 65Hz
CH 1
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
CH 2
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
CH 3
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
CH 4
POWER
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
400Hz 65Hz
400Hz 65Hz
400Hz 65Hz
400Hz 65Hz
CH 1
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
CH 2
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
CH 3
PROT
VOLUME
MIN MAX
HPF
CLIP-10dB -30dB
CH 4
5 units
5 units
Precautions
Precautions
1. Do not connect outputs of two or more channels in parallel.
2. Do not connect speakers with a smaller impedance than specified to avoid the damage of the unit.
3. Keep the input cable away from the output cable.
Installation Precautions
Installation Precautions
1. When mounting the unit in an rack, the inside of the rack must be sufficiently ventilated.
To achieve sufficient ventilation, remove panel on the rear of the rack or use Fan at the top of the rack.
2. When mounting the unit in the rack, mount a Blank Panel at the top and the bottom of the rack and above
and below every 5 units.
4
DPA-430H
Front Panel
7654
321
Front Panel
MULTI CHANNEL POWER AMPLIFIER
1. POWER SWITCH
Pressing this switch turns the unit on. Pressing it again turns the unit off.
2. POWER LED
When the unit is powered on, the Power LED lights Green. When the power is off, the Power LED lights Red.
3. OUTPUT LEVEL INDICATOR
The –30dB LED lights green when an output signal level exceeds about -30dB. The –10dB LED lights green when an output signal level exceeds about -10dB. The CLIP LED lights amber when an output signal clips (distortion occurs). NOTE: Do not operate the unit with the CLIP LED continuously on.
Decrease the volume level to avoid signal clipping.
4. PROTECTION INDICATOR
PROT indicator lights red when the protection circuitry is activated. When the power is turned on, the PROT indicator lights for about 2 seconds.
5. VOLUME CONTROL
Adjust the input level of each channel. To increase the volume level, turn the volume clockwise. The volume control range can be set both 0dB ~ -12dB and 0dB ~ minimum by changing the volume range setting switch internally. (See page 8).
DPA-430H
5
MULTI CHANNEL POWER AMPLIFIER
6. HIGH PASS FILTER SWITCH
ressing the switch turns on the high pass filter.
P The corner frequency (-3dB) is 65Hz when the high pass filter switch is off or 400Hz when the high pass filter switch is on. NOTE: When the unit is connected with horn speaker, the high pass filter must be set to ON.
If not use the high pass filter, it may damage the connected speakers, possibly resulting in fire.
7. VENTILATION
It is the air vents. Do not stuck the ventilation panel to secure enough cooling. Inside the ventilation panel, there is a dust filter. To clean the filter, remove the front panel and clean the dust filter.
6
DPA-430H
Rear Panel
12 34
Rear Panel
MULTI CHANNEL POWER AMPLIFIER
1. INPUT TERMINALS
Connect signal input cables to these terminals. The input circuitry is balanced type. (+ : Hot, - : Cold, GND: Ground)
2. SPEAKER OUTPUT TERMINALS
Connect speaker cables to these terminals. Only connect speakers with an impedance equal to or greater than those specified below.
Country Speaker Output Speaker Impedance (CH1~CH4)
Europe 100V 33.3
USA /Canada 70V 16.3
NOTE: Connecting speakers with a smaller impedance than specified could damage the unit.
3. FAN
It is the cooling fan vents. When inner temperature reaches the certain level, the speed of the fan gets faster. Please give attention not to block the vents when install the unit.
4. AC INLET
Connect the supplied power cord to this inlet.
DPA-430H
7
MULTI CHANNEL POWER AMPLIFIER
VR200
CP207
VR200
CP207
pull out
Volume Range Setting
Volume Range Setting
The volume control range can be set both 0dB ~ -12dB and 0dB ~ minimum by changing the volume range setting internally. The factory default setting is 0dB ~ minimum.
1. Volume Range: 0dB ~ minimum (factory default)
2. Volume Range: 0dB ~ -12dB
To change the volume range from 0dB ~ minimum to 0dB ~ -12dB, pull out the connector connected to the CP207.
8
DPA-430H
MULTI CHANNEL POWER AMPLIFIER
1
0W 10W
....
1
0W 10W
Connecting Speakers
Connecting Speakers
Before connecting speakers, disconnect the AC power cable. Note the proper connecting terminals as below. Make sure that the total impedance is not less than the rated impedance indicated.
HIGH IMPEDANCE SPEAKER INSTALLATION
Only connect speakers with an impedance equal to or greater than those specified below.
Country Speaker Output Speaker Impedance (CH1~CH4)
Europe 100V 33.3
USA /Canada 70V 16.3
NOTE : 1. Connecting speakers with smaller impedance than specified could damage the unit.
2. Do NOT connect low impedance speakers such as 4, 8 etc to these speaker terminals, it could causes damage to the unit.
3. Do not connect outputs of two or more channels in parallel.
4. Keep the output cable away from the input cable.
DPA-430H
9
MULTI CHANNEL POWER AMPLIFIER
Applications
Applications
10
DPA-430H
Block Diagram
Block Diagram
MULTI CHANNEL POWER AMPLIFIER
DPA-430H
11
MULTI CHANNEL POWER AMPLIFIER
Specifications
Specifications
DPA-430H
Rated Output Power 300W x 4 channels Output Voltage/Impedance 100V / 33.3, 70V / 16.3 T.H.D (AES17)
Prated (300W, 1kHz) Less than 0.1%
1
Prated (100W, 1kHz) Less than 0.03%
3
High Frequency Response (+1, -3dB) Over than 20kHz Low Frequency Response
High Pass Filter Off (-3dB ±2dB) 65Hz High Pass Filter On (-3dB ±2dB) 400Hz
Volume Control 0dB ~ minimum (default)
0dB ~ -12dB (with setting change) S/N (20kHz LPF, A-WTD) Better than 100dB Input Sensitivity/Impedance 1V / 10k Balance Operating Temperature -10°C ~ +40°C Power Source 120VAC or 220–240VAC, 50/60Hz
(Differs depends on country) Power Consumption 250W (1/8 Pmax) Weight (Set) 9.6kg / 21.2lb Dimensions (Set) 482(W) x 44(H) x 420(D)mm/19(W) x 1.7(H) x 16.5(D)in
* Specifications and design subject to change without notice.
12
DPA-430H
DIMENSIONS
482
44
4
40
420
44
MULTI CHANNEL POWER AMPLIFIER
DPA-430H
13
MULTI CHANNEL POWER AMPLIFIER
Service
Service
Procedures
Take steps to insure the problem is not related to operator error or other products within the system. Once it is certain that the problem is related to the product, contact your warranty provider as described in the warranty section of this manual.
Variations and Options
Variations and Options
Variations
Variations of this product exist to reflect the variations in AC power requirements throughout the world. Product supplied through local sources are compatible with local AC power requirements.
Options
No optional items are available for this product.
Warranty
Warranty
Warranty terms and conditions vary by country and may not be the same for all products. Terms and conditions of warranty for a given product may be determined first by locating the appropriate country which the product was purchased in, then by locating the product type.
To obtain specific warranty information and available service locations, contact Inter-M directly or the authorized Inter-M Distributor for your specific country or region.
14
DPA-430H
NOTE
MA-106
DPA-430H
15
13
NOTE
12
DPA-430H
DPA-430H
3
Inter-M, Ltd. (Korea) began operations in 1983.
Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world.
Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).
The company is no longer just a Korean company, but rather a global company that is truly international in scope, with factories and offices in Korea and China, and sales and marketing operations located in Japan, Europe, and the U.S.A.
With more than 850 employees around the globe, Inter-M is well-poised for further growth and expansion.
Inter-M Americas, Inc.
13875 Artesia Blvd. Cerritos, CA 90703 USA TEL : +1-562-921-0313, FAX : +1-562-921-0370 Home Page : http://www.inter-m.net, E-mail : info@inter-m.net
Inter-M Corporation
Seoul OFFICE:653-5 BANGHAK-DONG, DOBONG-KU, SEOUL, KOREA TEL : +82-2-2289-8140~8, FAX : +82-2-2289-8149 Home Page : http://www.inter-m.com, E-mail : overseas@inter-m.com
MADE IN KOREA
June 2010 126013
Loading...