DAC-288
Network Audio
DANTE Network Audio Technology
Audinate’s Dante™ is a modern high performance digital media transport system that runs over
standard IP networks. Dante exceeds all other systems in speed, channel count, ease of use,
flexibility and scalability.
Dante™ offers a no hassle, self-configuring, true plug and play digital audio networking
experience. It is a total solution for transporting low latency uncompressed audio over standard
IP Ethernet networks with sample accurate synchronization, automatic device and channel
discovery, and easy to use signal routing.
DANTE Audio Network
DANTE Audio network of Audinate Company in Austrailia is currently most advanced audio
network technology which can trasmitt with 48kHz, 24bit high quality digital audio in real time
through IP network. (Maximun delay time: under 1ms)
8 In/Out Dry Contact & RS-232C
By DANTE Audio Network the equipment can be controlled wherever the units installed
with using a Dry Contact In/Out Port. Also serial communication can be done by built-in
RS-232 port.
8 Channel Audio input and output
Each unit has 8 channel audio input and output can be transmitted each others in same
network and DAC-288 supports full bi-directional transmission. All audio transmission
between the units can be controlled by using a Dante Management Software.
PC Control
Audio connection control and monitoring can be done by using a Dante Management Software
which comes with a package. So in case of any system consist of multiple DAC-288 system
installation, any input audio channel can be connected with any output audio channel and can
be monitored.
DAC-288 | DANTE Network Audio
RS-232C
Front / Rear Panel
NETWORK AUDIO
Power LED
1
1
In / Out Audio Signal
2
32
Dante Network Status
3
Indicator
5 5
11
1
2 3
10
7 8 9
4
12 12
6
AC
1
Power S/W
2
DC 24V
3
8Ch Audio Input
4
Mic/Line Level Select
5
8Ch Audio Output
6
RS-232C Port
7
Primary Dante Network Port
8
Secondary Dante Network Port
9
8 Dry Contact Input
10
8 Dry Contact Output
11
Input Level Adjust
12
DAC-288 | DANTE Network Audio
Specifications
Output Level 0dBV (Balanced)
Input Sensitivity BGM 1~8 LINE: -10dBV/3kΩ (Balanced)
Frequency Response (±3dB) 20Hz~20kHz
T.H.D LINE : Less than 0.1% (TBD)
SNR (LINE (+8dBV Input) ) Better than 90dB (TBD)
Communication TCP/IP, UDP, IGMP
Audio Stream Dante Network Audio
Operating Temperature 0�C ~ +40�C
Operating Power AC110 ~ 230, DC 24V, 900mA
Weight (SET) Less than 6Kg
Dimensions (SET) 482(W) x 88(H) x 280(D)mm
Applications
Headquarters
Audio
Dry Contact
DAC-288
Serial Comm.
Network
Control PC
Local
DAC-288
Network
Remote Mic SR Amp
Local #1
Local #2
SR Speaker
Inter-M Corp. (IMK)
653-5 Banghak-Dong, Dobong-Ku, Seoul, Korea
Overseas Sales Team
Tel_ +82-2-2289-8141~7 Fax_ +82-2-2289-8149 E-mail_ overseas@inter-m.com www.inter-m.com
* Design and specification are subject to be changed without pre notice.
Loading...