Inter-M CT-100M User Manual

CT-100M/CR-100M

123

123

UTP
or
OPTIC

RX

TX

GND

RXTX

GND

12345

12345

Features

This product is the optional module which adds the

­control signal transfer function for the ITX/IRX
Series, FTA/FRA-108S.

- Simple Installation

Easy installation is possible because there is a
installation slot in the set.

- Provide the various control signals

It can be applied to several peripherals because it
can transfer the contact point signals of RS-232 and
RS-422.

- Applied Equipment

• CT-100M : FTA-108S, ITX-108, ITX-102

• CR-100M : FRA-108S, IRX-108, IRX-102

Front Panel (CT-100M)

1. RS-422 Terminal

Input/output terminal of RS-422 signal.

2. RS-232 Terminal

Input/output terminal of RS-232 signal.

3. Contact Point Output Terminal

Contact point output terminal

Front Panel (CR-100M)

1. RS-422 Terminal

Input/output terminal of RS-422 signal.

2. RS-232 Terminal

Input/output terminal of RS-232 signal.

3. Contact Point Output Terminal

Contact point output terminal

※Compatible Equipment:

FTA-108S, ITX-108, ITX-102

Connection Chart (RS-232)

※Compatible Equipment:

FRA-108S, IRX-108, IRX-102

CT-100M/CR-100M

UTP
o

r

OPTIC

Connection Chart (RS-422)

Standards and Functions

CT-100M, CR-100M

Baud Rate(RS-232, RS-422)
Contact Output DRY CONTACT

ower Source +5V, +24V (Supplied from

P

Operating Temperature –10°C ~ 40°C
Weight(Set) 250g/0.55lbs
Dimensions(Set) 85(W) x 35(H) x135(D)mm/

Cautions

1. Do not use RS-232 and RS-422 port at a same time.

2. Check the compatible equipment when installing the
module.

MAX 19200bps

Applied Equipment)

3.35(W) x 1.38(H) x 5.31(D)

in

MADE IN KOREA

May 2012 130709