Inter-lux VEDETTE-R, VEDETTE-Q, VEDETTE-Q BLADE Installation Instructions Manual

LED-FGI444-E

INSTALLATION INSTRUCTIONS

VEDETTE-R//VEDETTE-Q

A.1

SCRWES
INCLUDED

A

VED

MONO-EMISSION - DOUBLE-EMISSION
VEDETTE-R (2W) // VEDETTE-R (8W)
VEDETTE-Q (2W) // VEDETTE-Q (8W)
VEDETTE-Q BLADE MONO-DUOBLE EMISSION

ETTE-Q BLADE

MONO-EMISSION - DOUBLE-EMISSION
VEDETTE-R (20W) // VEDETTE-Q (20W)

B

A.2

SINGLE GANG BOX
NOT INCLUDED

SECONDARY CABLE
INCLUDED

A.3

TOOL NOT
INCLUDED

BRACKET
INCLUDED

BACK-PLATE
INCLUDED

O 0,9"

A.4

BACK-PLATE
INCLUDED

TOOL NOT
INCLUDED

SCREWS
INCLUDED

SCREWS INCLUDED

APPLY
SILICONE

SCREWS
INCLUDED

26/11/2015

TOOL NOT
INCLUDED

USE CABLE
GLAND

TOOL NOT
INCLUDED

Pag. 1

B.1

SCREWS
INCLUDED

SECONDARY CABLE
INCLUDED

BRACKET
INCLUDED

O 0,9"

USE CABLE
GLAND

B.2

SCREWS
INCLUDED

SINGLE GANG BOX
NOT INCLUDED

APPLY
SILICONE

B.3

TOOL NOT
INCLUDED

SCREWS
INCLUDED

TOOL NOT
INCLUDED

TOOL NOT
INCLUDED

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED

MOUNTING INSTRUCTIONS
READ ALL OF THESE INSTRUCTIONS BEFORE INSTALLING FIXTURES

· Keep all of the instructions for future reference

· Turn off power before installing fixture

· Installation is to be performed by a qualified electrician only

· All installations must conform to the National Electrical Code as well as all local jurisdictional codes and regulations

· Any modification of the luminaire will void any and all written or implied warranties

· The manufacture accepts no responsibility for damage to persons or property airing through improper use or installation

INS

TALLATION SEQUENCE

- Mount remote driver in accessible well ventilated space

- Ensure power is off before connecting driver to line voltage

- Connect secondary wiring to fixture wiring on the single gang box

- Remove the bracket from the Vedette [B.1] and the back-plate [A.1]

- Attach the back-plate on the single gang box [A.2] or the bracket [B.2] with the
screws

- Attach the bracket on the back-plate

- Attach the Vedette on the bracket with the screws [A.4 - B.3]

- WARNING - Be sure secondary wiring is connected to driver BEFORE energizing to
avoid LED failure

- Energize

with the screws

[A.3]

Colours Secondary Cable Pole

Wire white +

Wire black -

Wire

green Ground

Pag. 2