Interlogix VT9930WDM-SC, VT9930WDM-FC, VT9930WDM-SC-R3, VR9930WDM-SC-R3, VR9930WDM-C Specsheet

International Fiber Systems, Incorporated ■ DESIGN CENTER (888) 999-9IFS or [phone]

FAX [phone]

■ [e-mail]

Europe, Middle East, Africa TEL [phone]

■ Asia Pacific TEL [phone] ■ Latin America TEL [phone]

• Frequency Modulation for High Quality Video Transmission

• Directly Compatible with All NTSC, PAL, or SECAM
CCTV Camera Systems

• LED Status Indicators Provide Rapid Indication of
Critical Operating Parameters

• Integrated WDM for Greater Reliability

• Solid-State Current Limiters on All Power Lines
Provide Equipment Protection

• Wide Optical Dynamic Range: Optical Attenuators
are Never Required

• NTCIP Compatible

• Tested and Certified by an Independent Testing Laboratory for
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.

• Robust Design Ensures
Extremely High Reliability
in Unconditioned Roadside
Environments

• Comprehensive Lifetime Warranty

PRODUCT SPECIFICATION

FM VIDEO WITH BI-DIRECTIONAL DATA

VT/VR9930WDM

FEATURES

• CCTV with PTZ Control

APPLICATION EXAMPLES

DESCRIPTION

V

D

ORDERING INFORMATION

PART
NUMBER

OPTICAL

PWR BUDGET

MAX.

DISTANCE*

SINGLEMODE

9/125µm

1

41 miles (66 km)

PS-24VACCT 24 volt AC Center Tap Power Supply (Included)
PS-24VACCT-230 24 Volt AC Center Tap Power Supply 230 VAC Input (Included if specified at time of order)

Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add -SC for SC connector (Singlemode equipment only)
Add -‘FC’ to model number for FC Optical Connector (Singlemode equipment only)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)

VT9930WDM
VR9930WDM

FIBERS

REQUIRED

23 dB

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.

♦♦

All accessories are third party manufactured.

DESCRIPTION

Video Transmitter/Data Transceiver (1310/1550 nm)

Video Receiver/Data Transceiver (1550/1310 nm)

.comwww.

Available at:

Available at:

• A & E Specifications, (CSI)

• AutoCAD Drawings

• Operation Manuals

• Technical Bulletins

ACCESSORIES

♦♦

OPTIONS

The IFS VT/VR9930WDM video transmitter/data transceiver and
video receiver/data transceiver units utilize frequency modulation for
high video quality that meets the requirements of EIA RS-250C. These
environmentally hardened units provide the simultaneous transmis­sion of video and full-duplex data over one singlemode optical fiber
and are ideal for use in unconditioned out-of-plant or roadside instal­lations. Completely transparent to and universally compatible with
any NTSC, PAL, or SECAM CCTV camera system, all standard pan­tilt-zoom control signals including RS-232, RS-422, and 2-wire RS­485 data are supported. Plug-and-play design ensures ease of installa­tion and no electrical or optical adjustments are ever required. LED
indicators are provided for rapidly ascertaining equipment operating
status, and these units are available in either stand-alone or rack mount
configurations.

03/27/06

Video

(Coax)

Control

Data

Video

(Coax)

1 Fiber

9/125µm SM

VT9930WDM

Control

Data

VR9930WDM

up to 41 miles

(66 km)

ifs

InternationalInternational

FiberFiber

SystemsSystems

IncorporatedIncorporated

203.426.1180203.426.1180

ifs

InternationalInternational

FiberFiber

SystemsSystems

IncorporatedIncorporated

203.426.1180203.426.1180

SYSTEM DESIGN

VIDEO

Video Input: 1 volt pk-pk, (75 ohms)
Bandwidth: 5 Hz - 10 MHz min., @ -3 dB
Differential Gain: <2%
Differential Phase: <1.3°
Tilt: <1%
Signal-to-Noise Ratio: >60 dB @ Maximum Optical Loss Budget

DATA

Data Interface: RS-232, RS-422, RS-485 two-wire
Data Format: NRZ, NRZI, Manchester, Bi-phase
Operating Mode: Simplex or Full Duplex
Data Rate: DC-100 Kbps (NRZ)
Bit Error Rate: <1 in 10

-9

@ Maximum Optical Loss Budget

WAVELENGTH 1310/1550 nm, Singlemode

OPTICAL EMITTER Laser Diode

NUMBER OF FIBERS 1

LED INDICATORS

VT Transmitter/ Data Transceiver Unit:

• Video Input Sync Presence

• Transmitted Data

• Received Data

• Optical Carrier Detect

• Operating Power

VR Receiver/ Data Transceiver Unit:

• Video Output Sync Presence

• Transmitted Data

• Received Data

• Optical Carrier Detect

• Operating Power

CONNECTORS

Power: Terminal Block w/Screw Clamps

•

Data: Type DB-25S
Video: BNC (Gold Plated Center-Pin)
Optical: Type ST, SC, or FC

(see ordering information)

ELECTRICAL & MECHANICAL

Power:
Surface Mount: VT: 24 VAC C.T. @ 300 mA

VR: 24 VAC C.T. @ 600 mA
Rack: From Rack
Number of Rack Slots: 2
Current Protection: Automatic Resettable Solid-State Current

Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.0 x 2.0 in., 17.8 x 12.5 x 5.1 cm
Rack Mount: 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
Shipping Weight: < 2 lbs./0.9 kg

ENVIRONMENTAL

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C, ambient
Storage Temp: -40° C to +85° C, ambient
Relative Humidity: 0% to 95% (non-condensing)†

† May be extended to condensation conditions by adding suffix ‘–C’ to model
number for conformal coating.

• Optional Type DB-9P: Specify connector style at time of order.

SPECIFICATIONS

TEL [phone] ■ FAX [phone] ■ www.ifs.com ■ [e-mail]

16 Commerce Road

■ Newtown, CT 06470

Due to our continued effort to advance technology, product specifications are subject to change without notice.

TECHNICAL SPECIFICATION

FM VIDEO WITH BI-DIRECTIONAL DATA

VT/VR9930WDM

OPTICAL POWER BUDGET

FIBER

WAVELENGTH

TRANSMITTER

RECEIVER

OPTICAL

PWR BUDGET

MAX.

DISTANCE*

MODEL

OUTPUT MODEL

SENSITIVITY

VT9930WDM

200 µw
(-7 dB)

1 µw

(-30 dB)

Singlemode

9/125µm

1310/1500 nm

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.

VR9930WDM

23 dB

41 miles (66 km)

AGENCY COMPLIANCE

MADE IN THE USA

Federal Supply Schedule

Contract No. GS-07F-0049M

Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J