Interlogix VT7230-R3 Specsheet

International Fiber Systems, Incorporated ■ DESIGN CENTER (888) 999-9IFS or [phone]

FAX [phone]

■ [e-mail]

Europe, Middle East, Africa TEL [phone]

■ Asia Pacific TEL [phone] ■ Latin America TEL [phone]

• 8-Bit Digitally Encoded Video Transmission Transmits
2 Real-Time Color Video Signals

• Exceeds RS-250C Medium-Haul Transmission
Performance Standard Directly Compatible with All
NTSC, PAL, or SECAM CCTV Camera Systems

• LED Status Indicators Provide Indication of Critical
Operating Parameters

• Tested and Certified by an Independent Testing Laboratory for
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the
Caltrans Specification for Traffic Signal Control Equipment.

• Solid-State Current Limiters on All Power Lines Provide
Equipment Protection

• Exceeds NEMA TS-1/TS-2 and Caltrans Traffic
Signal Control Equipment

• Compatible with Major CCTV Camera Manufactures

• No In-field Electrical or Optical

Adjustments Required

• Hot-Swappable Rack Modules

• Automatic Resettable Fuses on
all Power Lines

• Comprehensive Lifetime Warranty

PRODUCT SPECIFICATION

2-CHANNEL DIGITAL VIDEO MULTIPLEXER

VT/VR7200 SERIES

FEATURES

• CCTV

APPLICATION EXAMPLES

DESCRIPTION

The IFS VT/VR7200 series multiplexers simultaneously transmits two
channels of video over one optical fiber utilizing 8-bit digital encod­ing for the high-quality video transmission. These products exceed
EIA RS-250C for Medium-Haul Video Transmission performance
requirement. The modules are universally compatible with major
CCTV camera manufacturers. Plug-and-play design ensures ease of
installation requiring no electrical or optical adjustments. The modules
incorporate Power, Receiver Locked and Video Presence Status indi­cating LED’s to monitor proper system operation. The modules are
available in either stand-alone or rack mount versions.

ORDERING INFORMATION

PAR T
NUMBER

OPTICAL

PWR BUDGET

MAX.

DISTANCE*

SINGLEMODE

9/125µm

MULTIMODE

62.5/125µm**

1

1

1.2 miles (2 km)

▲

38 miles (60 km)

PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)

Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Add -SC for SC connector (Single-mode equipment only)
Add -‘FC’ to model number for FC Optical Connector (Single-mode equipment only)
Add -HP for High Power Transmitter

VT7220
VR7220

VT7230
VR7230

FIBERS

REQUIRED

10 dB

20 dB

DESCRIPTION

2 Channel Video Transmitter (1310 nm)

2 Channel Video Receiver (1310 nm)

2 Channel Video Transmitter (1310 nm)

2 Channel Video Receiver (1310 nm)

V

.comwww.

Available at:

Available at:

• A & E Specifications, (CSI)

• AutoCAD Drawings

• Operation Manuals

• Technical Bulletins

*

Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by

fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.

▲

This product may be used with 62.5µm graded index multimode fiber having a maximum

run length of 2 km and/or a maximum optical loss of 10 dB.

♦

All accessories are third party manufactured.

ACCESSORIES

♦

OPTIONS

09/09/04

TEL [phone]

■ FAX [phone] ■ www.ifs.com ■ [e-mail]

16 Commerce Road

■ Newtown, CT 06470

Due to our continued effort to advance technology, product specifications are subject to change without notice.

2 Video

Inputs

2 Video
Outputs

1 Fiber

62.5/125µm MM

VT7220

VR7220

ifs

InternationalInternational

FiberFiber

SystemsSystems

IncorporatedIncorporated

203.426.1180203.426.1180

ifs

InternationalInternational

FiberFiber

SystemsSystems

IncorporatedIncorporated

203.426.1180203.426.1180

up to 1.9 miles

(3 km)

SYSTEM DESIGN

VIDEO

Video Input: 1 volt pk-pk (75 ohms)
# Input/Output Channels: 2
Bandwidth (minimum): 10 Hz - 6.5 MHz
Differential Gain: <2%
Differential Phase: <0.7°
Tilt: <1%
Signal-to-Noise Ratio (SNR): 60 dB @ maximum Optical Loss Budget

OPTICAL EMITTER Laser Diode

WAVELENGTH 1310 nm, Multimode

1310 nm, Singlemode

NUMBER OF FIBERS 1

LED INDICATORS

VT Transmitter/ Data Transceiver Unit:

• Video Input Sync Presence for Each Video Channel

• Video Input overload for Each Video Channel

• Operating Power

VR Receiver/ Data Transceiver Unit:

• Video Output Sync Presence for Each Video Channel

• Video Output overload for Each Video Channel

• Optical Carrier Detect/ Link-Lock

• Operating Power

CONNECTORS

Optical: ST, SC or FC
Power: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)

ELECTRICAL & MECHANICAL

Power:
Surface Mount: 12 VDC @ 500 mA (Surface Mount)
Rack: From Rack
Number of Rack Slots: 2
Current Protection: Automatic Resettable Solid-State Current

Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount VT: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 5.1 cm
All Others: 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 7.6 cm
Shipping Weight: < 2 lbs./0.9 kg

ENVIRONMENTAL

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

† May be extended to condensation conditions by adding suffix ‘–C’ to model
number for conformal coating.

SPECIFICATIONS

TECHNICAL SPECIFICATION

2-CHANNEL DIGITAL VIDEO MULTIPLEXER

VT/VR7200 SERIES

OPTICAL POWER BUDGET

FIBER

WAVELENGTH

TRANSMITTER

RECEIVER

OPTICAL

PWR BUDGET

MAX.

DISTANCE*

MODEL

MODEL

VT7220

VT7230

Multimode

62.5/125µm

**

Singlemode

9/125µm

1310 nm

1.2 miles (2 km)

▲

38 miles (60 km)

VR7220

VR7230

10 dB

20 dB

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by
fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.

▲

This product may be used with 62.5µm graded index multimode fiber having a maximum

run length of 2 km and/or a maximum optical loss of 10 dB.

AGENCY COMPLIANCE

MADE IN THE USA

Federal Supply Schedule

Contract No. GS-07F-0049M

Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J