Interlogix VT71630-R3, VT71630-SC-R3, VT71620-R3, VR71620-R3 Specsheet
GE
VT/VR71600-R3 Series
Security
The IFS VT/VR71600-R3 video transmitter/multiplexer and
video receiver/demultiplexer series utilizes state-of-the-art
8-bit digital encoding and decoding for high-quality video
transmission that exceeds the requirements of EIA RS-250C
for Medium-Haul Video Transmission. These environmentally hardened units provide transmission of sixteen
independent video channels over one multimode or single
mode optical fiber and are ideal for use in unconditioned
roadside or out-of-plant installations. These units are
completely transparent to and universally compatible with
any NTSC, PAL, or SECAM CCTV camera system. Plug-andplay design ensures ease of installation and no electrical or
optical adjustments are ever required. LED indicators are
provided for rapidly ascertaining equipment operating
status, and these units are provided in a rack-mount
configuration only.
IFS 16-Channel Digitally Encoded
Video Multiplexer
Standard FeaturesOverview
• 8-Bit Digitally Encoded Video Transmission
Transmits 16 Real-Time Color Video Channels on
One Optical Fiber
• Exceeds All Requirements for RS-250C MediumHaul Transmission: Extremely High Video Performance
• Exceptionally Low Video Distortion with Zero
Performance Variation vs. Optical Path Loss
• Ideally Suited to Networks Requiring Multiple Physical
Layers where Video Degradation May be a Problem
• Tested and Certified by an Independent Testing
Laboratory for Full Compliance with the Environmental
Requirements (Ambient Operating Temperature,
Mechanical Shock, Vibration, Humidity with Condensation,
High-Line/Low-Line Voltage Conditions and Transient
Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
• Wide Optical Dynamic Range: Optical Attenuators are
Never Required
• Directly Compatible with All NTSC, PAL, or SECAM
CCTV Camera Systems
• Robust Design Ensures Extremely High Reliability In
Unconditioned Out-of-Plant Environments
• LED Status Indicators Provide Rapid Indication of Critical
Operating Parameters
• Solid-State Current Limiters on All Power Lines Provide
Equipment Protection
• Comprehensive Lifetime Warranty
16-Channel
Digitally Encoded
Video Multiplexer
Utilizing state-of-the-art 8-bit
digital encoding and decoding for
high-quality video transmission.
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
Agency compliance
Specifications
Video
Video Input: 1 volt pk-pk (75 ohms)
Input/Output Channels: 16
Bandwidth: 5 Hz - 6.5 MHz
Differential Gain: <2%
Differential Phase: <0.7°
Tilt: <1%
Signal-to-Noise Ratio (SNR): >60 dB @ Maximum Optical Loss Budget
Wavelength 1310/1550 nm, Single Mode or Multimode
Opticalemitter Laser Diode
Numberoffibers 1
Connectors
Optical: ST, SC or FC (see ordering information)
Video: BNC (Gold Plated Center-Pin)
Electrical&Mechanical
Power: 115/230 VAC
Number of Rack Slots: 7
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Rack Mount: 19.0 x 7.0 x 5.3 in., 48.3 x 17.8 x 13.3 cm
Shipping Weight: < 12 lbs./5.4 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
**
NOTE: All optical terminations need to be epoxy polished with a minimum back reflection of -30 dB.
System Design
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
16 Video Inputs
(Coax)
VT71630 VR71630
up to 22 miles
(36 km)
1 Fiber
9/125mm SM
Ordering Information
PartNumber OpticalPwr.Budget Max.Distance*
Multimode
62.5/125μm**
Single Mode
9/125μm
Options
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth.
** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
VT71620-R3
VR71620-R3
VT71630-R3
VR71630-R3
VT71630-HP-R3***
VT71630-HP1-R3***
VR71630
Add ‘-C’ to Model Number for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Add ‘-SC” to Model Number for SC Connector
Add ‘-FC’ to Model Number for FC Optical Connector
Description
16 Channel Video Transmitter/Multiplexer (1310/1550 nm)
16 Channel Video Receiver/Demultiplexer (1310/1550 nm)
16 Channel Video Transmitter/Multiplexer (1310/1550 nm)
16 Channel Video Receiver/Demultiplexer (1310/1550 nm)
16 Channel Video Transmitter/Multiplexer (1310/1550 nm)
16 Channel Video Transmitter/Multiplexer (1310/1550 nm)
16 Channel Video Receiver/Demultiplexer (1310/1550 nm)
FibersRequired
1
1
1
7dB
12 dB
15 dB
20 dB
1.2 miles (2 km)
22 miles (36 km)
28 miles (45 km)
37 miles (60 km)
16 Video Outputs (Coax)
to monitors or switches
Loading...