Interlogix VT71630-2DRDT-R3 Specsheet

GE

VT/VR71630-2DRDT-R3

Security

Video and 2-Channel Data Multiplexer

The IFS VT/VR71630DRDT-R3 video transmitter/data
transceiver and video receiver/data transceiver series
utilizes state-of-the-art 8-bit digital encoding and decoding
for high-quality video transmission that exceeds the
requirements of EIA RS-250C for Medium-Haul Video
Transmission. These environmentally hardened units
provide transmission of sixteen independent video
channels and two bi-directional data channels over one
single mode optical fiber and are ideal for use in
unconditioned roadside or out-of-plant installations.
Completely transparent to and universally compatible
with any NTSC, PAL, or SECAM CCTV camera system, all
standard pan-tilt-zoom control signals including RS-232,
RS-422, or 2 or 4-wire RS-485 with Tri-state and Sensornet
supported. Plug-and-play design ensures ease of
installation and no electrical or optical adjustments are
ever required. LED indicators are provided for rapidly
ascertaining equipment operating status, and these units
are available in rack-mount configurations only.

Application Examples

• High Performance CCTV with PTZ Control

• High Performance CCTV with Access Control

16-Channel

IFS 16-Channel Digitally Encoded

Standard Features Overview

• 8-Bit Digitally Encoded Video Transmission Transmits 16
Real-Time Color Video Channels and 2 Bi-Directional Data
Channels on One Single Mode Fiber

• Exceeds All Requirements for RS-250C Medium-Haul
Transmission: Extremely High Video Performance

• Exceptionally Low Video Distortion with Zero Performance
Variation vs. Optical Path Loss

• Ideally Suited to Networks Requiring Multiple Physical
Layers where Video Degradation May be a Problem

• Tested and Certified by an Independent Testing
Laboratory for Full Compliance with the Environmental
Requirements (Ambient Operating Temperature,
Mechanical Shock, Vibration, Humidity with Condensation,
High-Line/Low-Line Voltage Conditions and Transient
Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.

• Directly Compatible with All NTSC, PAL, or SECAM

CCTV Camera Systems

• Robust Design Ensures Extremely High Reliability In

Unconditioned Out-of-Plant Environments

• LED Status Indicators Provide Rapid Indication of Critical

Operating Parameters

• Solid-State Current Limiters on All Power Lines Provide
Equipment Protection

• Includes R3 Rack

• Comprehensive Lifetime Warranty

Digitally Encoded
Video and
2-Channel Data
Multiplexer

Utilizing state-of-the-art 8-bit
digital encoding and decoding for
high-quality video transmission.

Specifications

up to 22 miles

(36 km)

Data

Communications

Data

Communications

16 Video Inputs

(Coax)

VT71630-2DRDT-R3 VR71630-2DRDT-R3

16 Video Outputs (Coax)

to monitors or switches

Control

Data

Control

Data

Remote

Panel

PTZ Control

Master

Controller

1 Fiber

9/125µm SM

Video

Video Input: 1 volt pk-pk (75 ohms)
Input/Output Channels: 16
Bandwidth (minimum): 10 Hz - 6.5 MHz per channel
Differential Gain: <2%
Differential Phase: <0.7°
Tilt: <1%
Signal-to-Noise Ratio (SNR): 60 dB @ Maximum Optical Loss Budget

Data

Data Channels: 2
Data Format: RS-232, RS-422, 2 wire or 4 wire RS-485 with Tri-State, Manchester,
Bi-phase and Sensornet
Data Rate: DC - 100 kbps (NRZ)
Bit Error Rate: <1 in 10˚ @ Maximum Optical Loss Budget
Operating Mode: Simplex or Full-Duplex

Wavelength 1310/1530/1550 nm, Single Mode

Optical emitter Laser Diode

Number of fibers 1

Connectors

Optical: ST, SC or FC (see ordering information)
Data: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)

Electrical & Mechanical

Power: 115/230 VAC
Number of Rack Slots: 8
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Rack Mount: 19.0 x 7.0 x 5.3 in., 48.3 x 17.8 x 13.3 cm
Shipping Weight: < 12 lbs./5.4 kg

Environmental

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.

System Design

Ordering Information

Part Number Optical Pwr. Budget Max. Distance*

Single Mode
9/125µm

Options

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth.

VT71630-2DRDT-R3
VR71630-2DRDT-R3

Add ‘-C’ to Model Number for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Add ‘-SC” to Model Number for SC Connector
Add ‘-FC’ to Model Number for FC Optical Connector

Description

16 Channel Video Transmitter/Multiplexer w/2 Bi-Directional Data Channels
16 Channel Video Receiver/Demultiplexer w/2 Bi-Directional Data Channels

Fibers Required

1

12 dB

22 miles (36 km)