Interlogix VT71230-R3 Specsheet

PRODUCT SPECIFICATION
.comwww.
Available at:
Available at:
12-CHANNEL DIGITALLY ENCODED VIDEO MULTIPLEXER
DESCRIPTION
The IFS VT/VR71230-R3 video transmitter and video receiver utilize state-of-the-art 8-bit digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for Medium-Haul Video Transmission. These environmentally hardened units provide transmission of twelve independent video channels over one singlemode or multimode optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. Completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera system. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required LED indicators are provided for rapidly ascertaining equipment oper­ating status, available in rack-mount configuration only.
VT/VR71230-R3
FEATURES
• 8-Bit Digitally Encoded Video Transmission Transmits 12 Real-Time Color Video Channels on One Singlemode Optical Fiber
• Exceeds All Requirements for RS-250C Medium­Haul Transmission: Extremely High Video Performance
• Exceptionally Low Video Distortion with Zero Performance Variation vs. Optical Path Loss
• Ideally Suited to Networks Requiring Multiple Physical Layers where Video Degradation may be a Problem
• Tested and Certified by an Independent Testing Laboratory for Full Compliance with the Environmental Requirements (Ambient Operating Temperature, Mechanical Shock, Vibration, Humidity with Condensation, High-Line/Low-Line Voltage Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
• Directly Compatible with All NTSC, PAL, or SECAM CCTV Camera Systems
• Robust Design Ensures Extremely High Reliability In Unconditioned Out-of-Plant Environments
• LED Status Indicators Provide Rapid Indication of Critical Operating Parameters
• Solid-State Current Limiters
on All Power Lines Provide Equipment Protection
• Comprehensive Lifetime Warranty
• A & E Specifications, (CSI)
• AutoCAD Drawings
• Operation Manuals
• Technical Bulletins
12
V
ORDERING INFORMATION
MULTIMODE
62.5/125µm**
SINGLEMODE
9/125
OPTIONS
* Optical transmission distance is limited to optical loss of the fiber
Distance can also be limited by fiber
NOTE: All optical terminations need to be epoxy polished with a minimum back reflection of -30dB.
PART NUMBER
VT71220-R3
VR71220-R3
VT71230-R3
m
µ
VR71230-R3
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory) Add “-SC’ to model number for SC Connector. Add ‘-FC’ to model number for FC Optical Connector.
International Fiber Systems, Incorporated DESIGN CENTER (888) 999-9IFS or (203) 426-1180
FAX (203) 426-3326
12 Channel
12 Channel Video Receiver-Demultiplexer (1310/1550 nm)
12 Channel Video Transmitter-Multiplexer (1310/1550 nm)
12 Channel Video Receiver-Demultiplexer (1310/1550 nm)
bandwidth. ** For
With Offices in
DESCRIPTION
ransmitter
T
ideo
V
50/125 Fiber, subtract 4 dB from Optical Power Budget.
sales@ifs.com For an office near you go to: www.ifs.com
Asia P
and any additional loss intr
acific
-Multiplexer (1310/1550 nm)
oduced by connectors, splices and patch panels.
alia
ustr
A
Europe Latin Amer
FIBERS
REQUIRED
1
1
ica
PWR BUDGET
OPTICAL
6 dB
12 dB
MAX.
DISTANCE*
1.2 miles (2 km)
22 miles (36 km)
93
up to 22.4 miles
(36 km)
1 Fiber
9/125m SM
12 Video Inputs
(Coax)
VT71230 VR71230
12 Video Outputs (Coax)
to monitors or switches
TECHNICAL SPECIFICATION
Federal Supply Schedule
Contract No. GS-07F-0049M
VT/VR71230-R3
12-CHANNEL DIGITALLY ENCODED VIDEO MULTIPLEXER
SPECIFICATIONS
VIDEO
Video Input: 1 volt pk-pk (75 ohms) # Input/Output Channels: 12 Bandwidth (minimum): 10 Hz - 6.5 MHz per channel Differential Gain: <2% Differential Phase: <0.7° Tilt: <1% Signal-to-Noise Ratio (SNR): 60 dB @ Maximum Optical Loss Budget
WAVELENGTH 1310/1550 nm,
OPTICAL EMITTER Laser Diode
NUMBER OF FIBERS 1
LED INDICATORS
Singlemode or Multimode
T Transmitter:
V
• Video Sync Presence for Each Input Channel
• Operating Power
R Receiver:
V
• Video Sync Presence for Each Output Channel on Receiver
• Video Sync Presence for Each Input Channel onTransmitter Optical Carrier Detect/ Link-Lock
• Operating Power
ONNECTORS
C
Optical: ST, SC, or FC (See ordering information) Power: Terminal Block with Screw Clamps Video: BNC (Gold Plated Center-Pin)
ELECTRICAL & MECHANICAL
Power: 115/230 VAC Number of Racks Slots: 6 Current Protection: Automatic Resettable Solid-State Current
Circuit Board: Meets IPC Standard Size (in./cm.) (LxWxH) Rack Mount: 19.0 x 7.0 x 5.3 in., 48.3 x 17.8 x 13.3 cm Shipping Weight: < 12 lbs./5.4 kg
NVIRONMENTAL
E
MTBF: > 100,000 hours Operating Temp: -40° C to +74° C Storage Temp: -40° C to +85° C Relative Humidity: 0% to 95% (non-condensing)†
† May be extended to condensation conditions by adding suffix ‘C’ to model number for conformal coating.
NOTE: All optical terminations need to be epoxy
Limiters
polished with a minimum back reflection of -30dB.
AGENCY COMPLIANCE
MADE IN THE USA
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
OPTICAL POWER BUDGET
FIBER
Multimode
62.5/125µm**
WAVELENGTH
TRANSMITTER
MODEL
VT71220-R3
RECEIVER
MODEL
VR71220-R3
1310/1550 nm
Singlemode
9/125µm
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
VT71230-R3
VR71230-R3
OPTICAL
PWR BUDGET
6 dB
12 dB
SYSTEM DESIGN
MAX.
DISTANCE*
1.2 miles (2 km)
22 miles (36 km)
94
TEL (203)426-1180 FAX (203)426-3326 www.ifs.com sales@ifs.com
16 Commer
Due to our continued effort to advance technology, product specifications are subject to change without notice.
ce Road
Newtown, CT 06470
Loading...