Interlogix VT71230-2DRDT-R3 Specsheet
GE
VT/VR71230-2DRDT-R3
Security
The IFS VT/VR71230DRDT-R3 video transmitter/data
transceiver and video receiver/data transceiver series
utilizes state-of-the-art 8-bit digital encoding and decoding
for high-quality video transmission that exceeds the
requirements of EIA RS-250C for Medium-Haul Video
Transmission. These environmentally hardened units provide
transmission of twelve independent video channels and two
bi-directional data channels over one single mode optical
fiber and are ideal for use in unconditioned roadside or
out-of-plant installations. Completely transparent to and
universally compatible with any NTSC, PAL, or SECAM CCTV
camera system, all standard pan-tilt-zoom control signals
including RS-232, RS-422, or 2 or 4-wire RS-485 with Tri-state
and Sensornet supported. Plug-and-play design ensures
ease of installation and no electrical or optical adjustments
are ever required. LED indicators are provided for rapidly
ascertaining equipment operating status, available in rackmount configuration only.
IFS 12-Channel Digitally Encoded Video
Application Examples
• High Performance CCTV with PTZ Control
• High Performance CCTV with Access Control
12-Channel
and 2-Channel Data Multiplexer
Standard FeaturesOverview
• 8-Bit Digitally Encoded Video Transmission Transmits 12
Real-Time Color Video Channels and 2 Bi-Directional Data
Channels on One Single Mode Fiber
• Exceeds All Requirements for RS-250C Medium-Haul
Transmission: Extremely High Video Performance
• Exceptionally Low Video Distortion with Zero Performance
Variation vs. Optical Path Loss
• Ideally Suited to Networks Requiring Multiple Physical
Layers where Video Degradation May be a Problem
• Tested and Certified by an Independent Testing
Laboratory for Full Compliance with the Environmental
Requirements (Ambient Operating Temperature,
Mechanical Shock, Vibration, Humidity with Condensation,
High-Line/Low-Line Voltage Conditions and Transient
Voltage Protection) of NEMA TS-1/TS-2 and the
Caltrans Specification for Traffic Signal Control Equipment.
• Directly Compatible with All NTSC, PAL, or SECAM CCTV
Camera Systems
• Robust Design Ensures Extremely High Reliability In
Unconditioned Out-of-Plant Environments
• LED Status Indicators Provide Rapid Indication of Critical
Operating Parameters
• Solid-State Current Limiters on All Power Lines Provide
Equipment Protection
• Includes R3 Rack
• Comprehensive Lifetime Warranty
Digitally Encoded
Video and
2-Channel Data
Multiplexer
Utilizing state-of-the-art 8-bit
digital encoding and decoding for
high-quality video transmission.
GE
Security
Specifications
Video
Video Input: 1 volt pk-pk (75 ohms)
Input/Output Channels: 12
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
Bandwidth (minimum): 10 Hz - 6.5 MHz per channel
Differential Gain: <2%
Differential Phase: <0.7°
Tilt: <1%
Signal-to-Noise Ratio (SNR): 60 dB @ Maximum Optical Loss Budget
Data
Data Channels: 2
Data Format: RS-232, RS-422, 2 wire or 4 wire RS-485 with Tri-State, Manchester,
Bi-phase and Sensornet
Data Rate: DC - 100 kbps (NRZ)
Bit Error Rate: <1 in 10˚ @ Maximum Optical Loss Budget
Operating Mode: Simplex or Full-Duplex
Wavelength 1310/1510/1530 nm, Single Mode
Opticalemitter Laser Diode
Numberoffibers 1
Connectors
Optical: ST, SC or FC (see ordering information)
Data: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)
Electrical&Mechanical
Power: 115/230 VAC
Number of Rack Slots: 12
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Rack Mount: 19.0 x 7.0 x 5.3 in., 48.3 x 17.8 x 13.3 cm
Shipping Weight: < 12 lbs./5.4 kg
Agency compliance
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
Made in the USA
Complies with FDA Performance
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
System Design
up to 22 miles
Data
(35 km)
1 Fiber
9/125µm SM
Data
Communications
Master
Controller
12 dB
12 Video Outputs (Coax)
to monitors or switches
Control
Data
22 miles (36 km)
12 Video Inputs
Control
Data
VT71230-2DRDT- R3 VR71230-2DRDT -R3
(Coax)
Communications
Remote
Panel
Ordering Information
PartNumber OpticalPwr.Budget Max.Distance*
Single Mode
9/125μm
Options
∗ Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth.
VT71230-2DRDT-R3
VR71230-2DRDT-R3
Add ‘-C’ to Model Number for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Add ‘-SC” to Model Number for SC Connector
Add ‘-FC’ to Model Number for FC Optical Connector
Description
12 Channel Video Transmitter/Multiplexer w/2 Bi-Directional Data Channels
12 Channel Video Receiver/Demultiplexer w/2 Bi-Directional Data Channels
FibersRequired
1
PTZ Control
Loading...