Interlogix VT6010-DRDT-R3, VT6010-DRDT Specsheet

• Transmits Four Real-Time Video Signals over Multimode Fiber

• Automatic Resettable Fuses on all Power Lines

• 10 Mhz Bandwidth Per Individual Channel

• NTSC, PAL, SECAM Compatible

• No In-field Electrical or Optical Adjustments
Required

• Power, Carrier Detect, Data Transmit and
Data Receiver Status Indicating LED’s

• Meets EIA RS-232, RS-422, RS-485 (2-wire/4-wire)

Specifications

• NTCIP Compatible

• Bi-Directional Data Rates up to 100 kbps

• Transparent to Data Encoding/Compatible

with Major Data Protocols

• FM Design

• Full Color Compatibility

• Hot-Swappable Rack Modules

• Comprehensive Lifetime Warranty

PRODUCT SPECIFICATION

4-CHANNEL VIDEO MULTIPLEXER WITH BI-DIRECTIONAL DATA

VT/VR6010DRDT

FEATURES

• CCTV with PTZ Control in Installations with Limited Fiber

• Integration of Fixed CCTV and Access Control Systems on
One Fiber

APPLICATION EXAMPLES

DESCRIPTION

The IFS VT/VR6010DRDT multiplexer simultaneously transmits four
channels of real-time video and one channel of bi-directional data over
one multimode fiber optic cable. These modules utilize frequency
modulation (FM) to reduce ghosting, jitter and cross-talk between
channels, thereby providing superior video transmission. The modules
are universally compatible with major CCTV and Access Control
manufactures and support bi-directional transmission of RS-232,
RS-422, or 2 or 4-wire RS-485 data interfaces and all major data pro­tocols. Plug-and-play design ensures ease of installation requiring no
electrical or optical adjustments. The modules incorporate Power,
Carrier Detect, Data Transmit and Data Receive status indicating
LED’s. The modules are available in either stand-alone or rack mount
version.

D

V

ORDERING INFORMATION

PART
NUMBER

OPTICAL

PWR BUDGET

MAX.

DISTANCE*

MULTIMODE

62.5/125µm**

1

1.2 miles (2 km)

▲▲

PS-12DC 12 VDC Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)

Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)

VT6010DRDT
VR6010DRDT

FIBERS

REQUIRED

7 dB

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by

fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.

▲▲

This product may be used with 62.5µm graded index multimode fiber having a maximum

run length of 2 km and/or a maximum optical loss of 10 dB.

♦♦

All accessories are third party manufactured.

DESCRIPTION

4 Channel Video Transmitter- Multiplexer (850/1310 nm)
4 Channel Video Receiver- Demultiplexer (850/1310 nm)

D

.comwww.

Available at:

Available at:

• A & E Specifications, (CSI)

• AutoCAD Drawings

• Operation Manuals

• Technical Bulletins

ACCESSORIES

♦♦

OPTIONS

International Fiber Systems, Incorporated ■ DESIGN CENTER (888) 999-9IFS or [phone]

FAX [phone]

■ [e-mail]

Europe, Middle East, Africa TEL [phone]

■ Asia Pacific TEL [phone] ■ Latin America TEL [phone]

Control

Data

4 Video Inputs

(Coax)

Control

Data

PTZ Control

4 Video Outputs (Coax)
to monitors or switchers

1 Fiber

62.5/125µm MM

VT6010DRDT VR6010DRDT

up to 1.2 miles

(2 km)

SYSTEM DESIGN

VIDEO

Video Input: 1 volt pk-pk (75 ohms)

# Input/Output Channels: 4

Bandwidth (typical): 10 Hz - 10 MHz

Differential Gain: <5%

Differential Phase: <5°

Tilt: <1%

Signal-to-Noise Ratio (SNR): 55 dB (Typical)

DATA

Data Interface: RS-232 (data lines only) or RS-422,

RS-485 2W/4W,

Data Format: Manchester - Bi-phase

Data Rate: DC 50 Kbps (NRZ)

WAVELENGTH 850/1300 nm, Multimode

NUMBER OF FIBERS 1

CONNECTORS

Optical: ST

Power and Data: Terminal Block with Screw Clamps

Video: BNC (Gold Plated Center-Pin)

ELECTRICAL & MECHANICAL

Power:

Surface Mount: VT: 12 VDC @ 500 mA

VR: 12 VDC @ 350 mA

Rack: From Rack

Number of Rack Slots: 3

Current Protection: Automatic Resettable Solid-State Current

Limiters

Circuit Board: Meets IPC Standard

Size (in./cm.) (LxWxH)

Transmitter: 7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.1 cm

All Others: 7.7 x 5.0 x 3.0 in., 19.6 x 12.7 x 7.6 cm

Shipping Weight: < 2 lbs./0.9 kg

ENVIRONMENTAL

MTBF: > 100,000 hours

Operating Temp: -40° C to +74° C

Storage Temp: -40° C to +85° C

Relative Humidity: 0% to 95% (non-condensing)†

† May be extended to condensation conditions by adding suffix ‘–C’ to model
number for conformal coating.

SPECIFICATIONS

TECHNICAL SPECIFICATION

4-CHANNEL VIDEO MULTIPLEXER WITH BI-DIRECTIONAL DATA

VT/VR6010DRDT

OPTICAL POWER BUDGET

FIBER

WAVELENGTH

TRANSMITTER

RECEIVER

OPTICAL

PWR BUDGET

MAX.

DISTANCE*

MODEL

MODEL

VT6010DRDT

Multimode

62.5/125µm

**

850/1310 nm

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by
fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.

▲▲

This product may be used with 62.5µm graded index multimode fiber having a maximum

run length of 2 km and/or a maximum optical loss of 10 dB.

VR6010DRDT

7 dB

1.2 miles (2 km)

▲▲

AGENCY COMPLIANCE

MADE IN THE USA

Federal Supply Schedule

Contract No. GS-07F-0049M

Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J

TEL [phone] ■ FAX [phone] ■ www.ifs.com ■ [e-mail]

16 Commerce Road

■ Newtown, CT 06470

Due to our continued effort to advance technology, product specifications are subject to change without notice.

07/27/06