Interlogix VT6010 Specsheet

VT/VR6010

IFS 4-Channel Video Multiplexer

Overview

The IFS VT/VR6010 multiplexer simultaneously transmits
four channels of real-time video signals over one multimode
fiber optic cable. The modules utilize frequency modulation
(FM) to reduce ghosting, jitter and cross-talk between
channels, thereby providing superior video transmission.
Plug-and-play design ensures ease of installation
requiring no electrical or optical adjustments. The modules
incorporate power and carrier detect status indicating LED’s
monitoring proper system operation. The modules
are available in either stand-alone or rack mount version.

Application Examples

• Installations with Limited Fiber

• Retrofits/System Upgrades

• Conduit with Limited Space for Additional Cabling

Standard Features

• FM Design

• Transmits and Receives Four Real-Time Video Signals

• 10 MHz Bandwidth Per Individual Channel

• NTSC, PAL, SECAM Compatible

• Full Color Compatibility

• Reduces Fiber/Cabling Cost

• No In-field Electrical or Optical Adjustments Required

• Power, Carrier Detect and Four Video Presence Status
Indicating LED’s for Each Individual Channel to Monitor
System Performance

• Hot-Swappable Rack Modules

• Automatic Resettable Fuses on all Power Lines

• Comprehensive Lifetime Warranty

4-Channel Video
Multiplexer

Simultaneously transmits 4 channels
of real-time video signals over
one multimode optical fiber.

Specifications

Control

Data

4 Video Inputs

(Coax)

Control

Data

PTZ Control

4 Video Outputs (Coax)
to monitors or switchers

1 Fiber

62.5/125µm MM

VT6010DRDT VR6010DRDT

up to 1.2 miles

(2 km)

Video

Video Input: 1 volt pk-pk (75 ohms)
Bandwidth: 10 Hz - 10 MHz (typical)
Differential Gain: <5%
Differential Phase: <5°
Tilt: <1%
Signal-to-Noise Ratio (SNR): 55 dB (typical)

Wavelength 850 nm, Multimode

Number of fibers 1

Connectors

Optical: ST
Power and Audio: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)

Electrical & Mechanical

Power:
Surface Mount: VT: 12 VDC @ 400 mA
VR: 12 VDC @ 300 mA
Rack: From Rack
Number of Rack Slots: 2
Current Protection: Automatic Resettable Solid-State Current Limiters
Max. RG59 Cable Length: 750 ft.
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Rack Mount: 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
Shipping Weight: <2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.

System Design

Ordering Information

Part Number Optical Pwr. Budget Max. Distance*

Multimode

62.5/125µm**

Accessories

♦

Options

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
*** This product may be used with 62.5µm graded index multimode fiber having a maximum run length of 2 km and/or a maximum optical loss of 10 dB.

♦

All accessories are third party manufactured.

VT6010
VR6010

PS-12 VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12 VDC 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)

Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)

Description

4 Channel Video Transmitter/Multiplexer (850 nm)
4 Channel Video Receiver/Demultiplexer (850 nm)

Fibers Required

1

10 dB

1.2 miles (2 km)***