Interlogix VT4930WDM-R3, VT4930WDM Specsheet
IFS® Line / Fiber Transmission
Optical Carrier Detect, Operating Power
VR: Video Output Sync Presence, Transmitted Data, Received Data,
Optical Carrier Detect, Operating Power
VR: 24 VAC C.T. @ 600 mA
43 miles (69 km)
1
Fibers Required
23 dB
◆
All accessories are third party manufactured.
System Design
VT/VR4930WDM
eries
S
IFS FM Video with Bi-Directional Data
OVERVIEW
T
he IFS VT/VR4930WDM Series video transmitter/data transceiver
and video receiver/data transceiver units utilize frequency modulation
for high video transmission quality. These environmentally hardened
units provide the simultaneous transmission of video and full-duplex
data over one single mode optical fiber and are ideal for use in
unconditioned out-of-plant or roadside installations. Completely
transparent to and universally compatible with any NTSC, PAL, or
SECAM CCTV camera system. All standard pan-tilt-zoom control
signals including RS-232, RS-422, and 2-wire RS-485 data are
supported. Plug-and-play design ensures ease of installation
and no electrical or optical adjustments are ever required. LED
indicators are provided for rapidly ascertaining equipment operating
status, and these units are available in either stand-alone or rack
mount configurations.
APPLICATION EXAMPLES
• CCTV with PTZ Control
STANDARD FEATURES
• Frequency Modulation for High Quality Video Transmission
• Directly Compatible with All NTSC, PAL, or SECAM CCTV Camera
Systems
• LED Status Indicators Provide Rapid Indication of Critical Operating
Parameters
• Integrated WDM for Greater Reliability
• Solid-State Current Limiters on All Power Lines Provide Equipment
Protection
• Wide Optical Dynamic Range: Optical Attenuators are Never
Required
• Robust Design Ensures Extremely High Reliability In Unconditioned
Roadside Environments
• Tested and Certified by an Independent Testing Laboratory for
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions
and Transient Voltage Protection) of NEMA TS-1/TS-2 and the
Caltrans Specification for Traffic Signal Control Equipment.
• NTCIP Compatible
• Comprehensive Lifetime Warranty
SYSTEM DESIGN
Video
(Coax)
Control
Data
VT4930WDM
International
Fiber
Systems
ifs
Incorporated
203.426.1180
up to 43 miles
(69 km)
1 Fiber
9/125µm SM
VR4930WDM
International
Fiber
Systems
ifs
Incorporated
203.426.1180
Video
(Coax)
Control
Data
interlogix.com
Specifications
Data
Data Interface: RS-232 (data lines only), or RS-422 (see note)
Data Rate: DC - 1.5 Mbps (NRZ)
Operating Mode: Asynchronous Simplex or Full-Duplex
Bit Error Rate: <1 in 10˚
Wavelength D1010: 850 nm, MM D1010WDMA: 850/1310 nm, MM
D1010WDMB: 1310/850 nm, MM D1020: 1310 nm, MM
D1030: 1310 nm, SM D1030WDMA: 1310 nm, SM
D1030WDMB: 1550 nm, SM
Number Of Fibers D1010: 2 D1010WDMA: 1 D1010WDMB: 1 D1020: 2
D1030: 2 D1030WDMA: 1 D1030WDMB: 1
Connectors
Optical: ST
Data and Power: Terminal Block with Screw Clamps
Electrical & Mechanical
Power:
Surface Mount: 12 VDC @ 150 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 4.2 x 4.0 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
V
T/VR4930WDM Series
IFS FM Video with Bi-Directional Data
Ordering Information
Single Mode 9/125µm VT4930WDM Video Transmitter/Data Transceiver (1310/1550 nm) 1 23 dB 43 miles (69 km)
Accessories ♦
Options Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦
All accessories are third party manufactured.
Specifications
Video
Video Input: 1 volt pk-pk (75 ohms)
Bandwidth: 5 Hz - 6.5 MHz
Differential Gain: <3%
Differential Phase: <3°
Tilt: <1%
Signal-to-Noise Ratio (SNR): 60 dB Minimum @ Maximum Optical Power Budget
Data
Data Interface: RS-232. RS-422, 2-Wire RS-485
Data Format: NRZ, NRZI, Manchester, Bi-phase
Data Rate: DC-100 Kbps (NRZ)
Operating Mode: Simplex or Full Duplex
Wavelength
Optical Emitter
Number Of Fibers
Led Indicators
Connectors
Optical: ST
Power and Data: Terminal Block with Screw Clamps
Video and Sync: BNC (Gold Plated Center-Pin)
Electrical & Mechanical
Power:
Surface Mount: VT: 24 VAC C.T. @ 300 mA
Rack: From Rack
Number of Rack Slots: 2
Current Protection: Automatic Resettable Solid-State Current Limiters
Max. RG59 Cable Length: 750 ft.
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.1 cm
Rack Mount: 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)
North America
T 855-286-8889
Part Number Description Fibers Required Optical Pwr. Budget Max. Distance*
VR4930WDM Video Receiver/Data Transceiver (1550/1310 nm) 1 23 dB 43 miles (69 km)
PS12VDC1.5A-U 12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
1310/1550 nm, Single Mode
Laser Diode
1
VT: Video Input Sync Presence, Transmitted Data, Received Data,
Optical Carrier Detect, Operating Power
VR: Video Output Sync Presence, Transmitted Data, Received Data,
Optical Carrier Detect, Operating Power
VR: 24 VAC C.T. @ 600 mA
Specifications subject to change without notice.
Interlogix is part of UTC Building & Industrial Systems,
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
© 2013 United Technologies Corporation
a unit of United Technologies Corporation.
Agency Compliance
Complies with FDA Performance
Latin America
T 561-998-6114
interlogix.com
All rights reserved.
VT/VR4930WDM Series
Loading...