Interlogix VT4030-R3, VT4030 Specsheet
VR: Optical carrier Detect, Operating Power
System Design
20 μw (-17 dBm)
20 μw (-17 dBm)
250 μw (-6 dBm)
25 μw (-16 dBm)
250 μw (-6 dBm)
250 μw (-6 dBm)
25 μw (-16 dBm)
200 μw (-7 dBm)
200 μw (-7 dBm)
200 μw (-7 dBm)
2.8 miles (4.5 km)
10 miles (16 km)
31 miles (51 km)
50 miles (81 km)
65 miles (104 km)
42 miles (68 km)
Tx Output
1
1
1
1
1
1
16 dB
16 dB
17 dB
27 dB
27 dB
27 dB
17 dB
26 dB
26 dB
26 dB
♦
All accessories are third party manufactured.
®
Line / Fiber Transmission
IFS
VT/VR4000 Series
IFS FM Video Transmitter
and Receiver
OVERVIEW
T
he IFS VT/VR4000 Series Video Transmitter and Receiver utilizes
frequency modulation for transmission quality that meets some of
the requirements for EIA RS-250C Medium-Haul Video Transmission. These environmentally hardened units provide transmission of
NTSC, PAL, or SECAM video over one multimode or singlemode
fiber optic cable and are ideal for use in unconditioned out-of-plant
or roadside installations. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.
LED indicators are provided for rapidly ascertaining equipment operating status, and this equipment is available in either stand-alone
or rack mount configurations.
APPLICATION EXAMPLES
• CCTV (Fixed Video)
STANDARD FEATURES
• Frequency Modulation for High Quality Video Transmission
• Meets Some Requirements for RS-250C Medium-Haul
Transmission
• Direct compatible with All NTSC, PAL, or SECAM CCTV
Camera Systems
• Tested and Certified by an Independent Testing Laboratory for
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the
Caltrans Specification for Traffic Signal Control Equipment.
• LED Status Indicators Provide Rapid Indication of Critical
Operating Parameters
• Solid-State Current Limiters on All Power Lines Provide
Equipment Protection
• Wide Optical Dynamic Range: Optical Attenuators are Never
Required
• Optical Loss Relay Output
• Comprehensive Lifetime Warranty
SYSTEM DESIGN
Video
(Coax)
VT4010
International
Fiber
Systems
ifs
Incorporated
203.426.1180
up to 2.8 miles
(4.5 km)
1 Fiber
62.5/125μm MM
Optical Loss
Relay
VR4010
International
Fiber
Systems
ifs
Incorporated
203.426.1180
Video
(Coax)
interlogix.com
Specifications
Data
Data Interface: RS-232 (data lines only), or RS-422 (see note)
Data Rate: DC - 1.5 Mbps (NRZ)
Operating Mode: Asynchronous Simplex or Full-Duplex
Bit Error Rate: <1 in 10˚
Wavelength D1010: 850 nm, MM D1010WDMA: 850/1310 nm, MM
D1010WDMB: 1310/850 nm, MM D1020: 1310 nm, MM
D1030: 1310 nm, SM D1030WDMA: 1310 nm, SM
D1030WDMB: 1550 nm, SM
Number Of Fibers D1010: 2 D1010WDMA: 1 D1010WDMB: 1 D1020: 2
D1030: 2 D1030WDMA: 1 D1030WDMB: 1
Connectors
Optical: ST
Data and Power: Terminal Block with Screw Clamps
Electrical & Mechanical
Power:
Surface Mount: 12 VDC @ 150 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 4.2 x 4.0 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
VT/VR4000 Series
North America
T 855-286-8889
Latin America
T 561-998-6114
IFS FM Video Transmitter and Receiver
Ordering Information
Part Number Description Fibers Required Tx Output Optical Pwr. Budget Max. Distance*
Multimode 62.5/125µm VT4010 FM Video Transmitter (850 nm) 1 25 μw (-17 dBm) 16 dB 2.8 miles (4.5 km)
VR4010 FM Video Receiver (850 nm) 1 25 μw (-17 dBm) 16 dB 2.8 miles (4.5 km)
VT4020 FM Video Transmitter (1310 nm) 1 20 μw (-17 dBm) 16 dB 10 miles (16 km)
VR4030 FM Video Receiver (1310 nm) 1 250 μw (-6 dBm) 16 dB 10 miles (16 km)
Single Mode 9/125µm VT4025 FM Video Transmitter (1310 nm), LED 1 25 μw (-16 dBm) 17 dB 31 miles (51 km)
VR4030 FM Video Receiver (1310 nm) 1 250 μw (-6 dBm) 27 dB 31 miles (51 km)
VT4030
VR4030 FM Video Receiver (1310 nm) 1 250 μw (-6 dBm) 27 dB 50 miles (81 km)
VT4055 FM Video Transmitter (1550 nm), LED 1 25 μw (-16 dBm) 17 dB 65 miles (104 km)
VR4055 FM Video Receiver (1550 nm) 1 200 μw (-7 dBm) 26 dB 65 miles (104 km)
VT4050 FM Video Transmitter (1550 nm), Laser 1
VR4050 FM Video Receiver (1550 nm) 1 200 μw (-7 dBm) 26 dB 42 miles (68 km)
Accessories ♦
Options 1068977A Power Supply, 24VACCT AT 0.60A, 240V/50HZ, 19W Level IV, (EU)
1068978A Power Supply, 24VACCT AT 0.60A, 240V/50HZ, 19W Level IV, (UK)
1068979A Power Supply, 24VACCT AT 0.60A, 120V/60HZ, 18W Level IV,(US)
1068980A Power Supply, 24VACCT AT 0.60A, 240V/50HZ, 19W Level IV, (AUS)
FM Video Transmitter (1310 nm), Laser 1 250 μw (-6 dBm) 27 dB 50 miles (81 km)
200 μw (-7 dBm) 26 dB 42 miles (68 km)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
Specifications
Video
Video Input: 1 volt pk-pk (75 ohms)
Bandwidth: 10 Hz - 10 MHz
Differential Gain: <2%
Differential Phase: <1.3°
Tilt: <1%
Signal-to-Noise Ratio (SNR): <60 Minimum @ Max. Optical Loss Budget
Wavelength 850 or 1310 nm, Multimode; 1310 or 1550 nm, Single mode
Receiver Sensitivity .5 μw (-33 dBm)
Number Of Fibers 1
Led Indicators VT: Video Sync Presence, Operating Power
Relays*** 24 VAC/DC @ 100 mA
Connectors
Optical: ST
Power: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)
Electrical & Mechanical
Power:
Surface Mount: VTVR: 24 VAC C.T. @ 300 mA, VT: 12 VDC @ 200 mA (Optional)
Rack: From Rack
Number of Rack Slots: 1
Current Protection Automatic Resettable Solid-state Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.4 x 2.5 cm
Rack Mount: 7.7 x 5.0 x 1.0 in., 19.6 x 12.7 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)
VR: Optical Carrier Detect, Operating Power
Specifications subject to change without notice.
Interlogix is par t of UTC Building & Industrial Systems,
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
© 2013 United Technologies Corporation
a unit of United Technologies Corporation.
Agency Compliance
Complies with FDA Performance
interlogix.com
All rights reser ved.
VT/VR4000 Series
Loading...