Interlogix VT1910WDM-R3 Specsheet

IFS® Line / Fiber Transmission

Optical Pwr. Budget

Max. Distance*

2 miles (3 km)

2.5 miles (4 km)

9 miles (15 km)

43 miles (69 km)

2

1

1

1

Fibers Required

13 dB

14 dB

15 dB

23 dB

◆

All accessories are third party manufactured.

System Design

VT/VR1900 Series

IFS FM Video with Bi-Directional
Data and Tamper Switch

OVERVIEW

The IFS VT/VR1900 Series video transmitter/receiver and data
transceiver supports the simultaneous transmission of frequency
modulation (FM) video, contact closure and bi-directional data over
one or two optical fibers. The modules are universally compatible
with major CCTV camera manufacturers and support RS-232,
RS-422, RS-485 (Tri-State 2 or 4-wire). Modules within the series
are available for use with multimode or single mode optical fiber.
Plug-and-play design ensures ease of installation requiring no
electrical or optical adjustments. The modules incorporate power,
and carrier detect status indicating LED’s to monitor proper system
operation. The modules are available in either stand-alone or rack
mount versions.

Function of tamper switch:
The tamper switch terminals on the VR will open upon one of the
following conditions; loss of carrier, loss of video, switching of SW3
on the VT to the ON position.

APPLICATION EXAMPLES

• CCTV with Bi-Directional PTZ Camera Control

• CCTV with Access Control Communication

• CCTV with Remote Signalization

• CCTV with Remote Keyboard Control

SYSTEM DESIGN

STANDARD FEATURES

• FM Video Transmission reduces ghosting, jitter and cross-talk
between channels, providing superior video transmission

• NTSC, PAL, SECAM Compatible

• NTCIP Compatible

• Supports Contact Closures, 24V AC/DC, 170ma - Optically
Isolated

• Optical Loss Relay Output

• Supports RS-232, RS-422, RS-485 (Tri-State 2 or 4-Wire)

• Transparent to Data Encoding/Compatible with Major CCTV
Camera Manufacturers

• Power and Carrier Detect Status Indicating LED’s to Monitor
System Performance

• Integrated WDM for Greater Product Reliability

• No In-field Electrical or Optical Adjustments Required

• Tested and Certified by an Independent Testing Laboratory for
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.

• Hot-Swappable Rack Modules

• Tamper Switch

• Automatic Resettable Fuses

• Full Color Compatibility

• Distances up to 43 Miles (69 km) Without Repeaters

• Comprehensive Lifetime Warranty

Video

(Coax)

Control

Data

VT1910

ifs

203.426.1180

up to 2 miles

(3.3 km)

International

Fiber

Systems

Incorporated

2 Fibers

62.5/125µm MM

Optical Loss

Relay

VR1910

ifs

203.426.1180

International

Fiber

Systems

Incorporated

Video

(Coax)

Control

Data

interlogix.com

Specifications

Data

Data Interface: RS-232 (data lines only), or RS-422 (see note)
Data Rate: DC - 1.5 Mbps (NRZ)
Operating Mode: Asynchronous Simplex or Full-Duplex
Bit Error Rate: <1 in 10˚

Wavelength D1010: 850 nm, MM D1010WDMA: 850/1310 nm, MM

D1010WDMB: 1310/850 nm, MM D1020: 1310 nm, MM
D1030: 1310 nm, SM D1030WDMA: 1310 nm, SM
D1030WDMB: 1550 nm, SM

Number Of Fibers D1010: 2 D1010WDMA: 1 D1010WDMB: 1 D1020: 2

D1030: 2 D1030WDMA: 1 D1030WDMB: 1

Connectors

Optical: ST
Data and Power: Terminal Block with Screw Clamps

Electrical & Mechanical

Power:
Surface Mount: 12 VDC @ 150 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 4.2 x 4.0 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.

GE

Security

North America
T 888-GE-SECURITY

888-437-3287
F 503-691-7566
E [e-mail]

Asia
T 852-2907-8108
F 852-2142-5063

Australia and New Zealand
T 613-9239-1200
F 613-9239-1299

Europe
T 44-113-238-1668
F 44-113-253-8121

Latin America
T 305-593-4301
F 305-593-4300

gesecurity.com/ifs

Specifications subject to
change without notice

© 2008 General Electric Company
All Rights Reserved

VT/VR1900 Series

IFS FM Video with Bi-Directional Data and Tamper Switch

Ordering Information

Multimode 62.5/125µm** VT1910 Video Transmitter/Data Transceiver (850 nm) 2 13 dB 2 miles (3 km)

Single Mode 9/125µm

Accessories ♦

Options Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately

*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.

♦

All accessories are third party manufactured.

Specifications

Video

Video Input: 1 volt pk-pk (75 ohms)

Bandwidth: 5 Hz - 6.0 MHz

Differential Gain: <5%

Differential Phase: <5°

Tilt: <1%

Signal-to-Noise Ratio (SNR): >55 dB @ 10 dB ATTN.

Wavelength

Contact Closure

Contacts: 24v AC/DC, 170 mA, Optically Isolated Tamper/Optical Loss Relay Output

Number Of Fibers

Connectors

Optical: ST

Power: Terminal Block with Screw Clamps

Video: BNC (Gold Plated Center-Pin)

Electrical & Mechanical

Power:

Surface Mount: 12 VDC @ 300 mA

Rack: From Rack

Number of Rack Slots: 1

Current Protection: Automatic Resettable Solid-State Current Limiters

Circuit Board: Meets IPC Standard

Size (in./cm.) (LxWxH)

Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm

Rack Mount: 7.7 x 5.0 x 1.0 in., 19.6 x 12.7 x 2.5 cm

Shipping Weight: < 2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours

Operating Temp: -40° C to +74° C

Storage Temp: -40° C to +85° C

Relative Humidity: 0% to 95% (non-condensing)

North America

T 855-286-8889

Part Number Description Fibers Required Optical Pwr. Budget Max. Distance*

VR1910 Video Receiver/Data Transceiver (850 nm) 2 13 dB 2 miles (3 km)

VT1910WDM Video Transmitter/Data Transceiver (1310/850 nm) 1 14 dB 2.5 miles (4 km)

VR1910WDM Video Receiver/Data Transceiver (850/1310 nm) 1 14 dB 2.5 miles (4 km)

VT1920WDM Video Transmitter/Data Transceiver (1310/1550 nm, Laser) 1 15 dB 9 miles (15 km)

VR1920WDM

VT1930WDM

VR193

0WDM

PS12VDC1.5A-U 12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)

VTVR1910: 850 nm MM, VTVR1910WDM: 1310/850 nm MM

VTVR1920WDM: 1310/1550 nm MM, VTVR1930WDM: 1310/1550 nm SM

Video Receiver/Data Transceiver (1550/1310 nm, Laser) 1 15 dB 9 miles (15 km)

Video Transmitter/Data Transceiver (1310/1550 nm, Laser) 1

Video Receiver

/Data Transceiver (1550/1310 nm, Laser)

1 23 dB

23 dB

Latin America

T 561-998-6114

43 miles (69 km)

43 miles (69 km)

VTVR1910: 2, VTVR1910WDM: 1, VTVR1920WDM: 1, VTVR1930WDM: 1

Specifications subject to change without notice.

Interlogix is part of UTC Building & Industrial Systems,

Standard for Laser Products, Title 21,

Code of Federal Regulations, Subchapter J

© 2013 United Technologies Corporation

a unit of United Technologies Corporation.

Agency Compliance

Complies with FDA Performance

interlogix.com

All rights reserved.

VT/ V R19 0 0 Ser i e s