®
Optical Pwr. Budget
Max. Distance*
9 miles (15 km)
43 miles (69 km)
1
1
Fibers Required
15 dB
23 dB
System Design
Line / Fiber Transmission
IFS
V T/ VR1500WDM
Series
IFS FM Video with Return Data
OVERVIEW
T
he IFS VT/VR1500WDM Series video and data transmitter/receiver
supports the simultaneous transmission of frequency modulation
(FM) video and return data over one optical fiber. The modules are
universally compatible with major CCTV camera manufacturers
and support RS-232 and RS-422 data interfaces and all major
data protocols. Modules with in the series are available for use
with multimode or single mode optical fiber. Plug-and-play design
ensures ease of installation requiring no electrical or optical
adjustments. The modules incorporate power, and carrier detect
status indicating LED’s to monitor proper system operation. The
modules are available in either stand-alone or rack mount versions.
APPLICATION EXAMPLES
• CCTV with One-Way PTZ Camera Control
• CCTV with Remote Signalization
SYSTEM DESIGN
STANDARD FEATURES
• FM Video Transmission reduces ghosting, jitter and cross-talk
between channels, providing superior video transmission
• NTSC, PAL, SECAM Compatible
• Full Color Compatibility
• Supports RS-232 or RS-422 Data Interfaces
• Transparent to Data Encoding/Compatible with Major CCTV
Camera Manufacturers
• No In-field Electrical or Optical Adjustments Required
• Power and Carrier Detect Status Indicating LED’s to Monitor
System Performance
• Hot-Swappable Rack Modules
• Automatic Resettable Fuses
• Distances up to 43 Miles (69 km) Without Repeaters
• Comprehensive Lifetime Warranty
Video
(Coax)
Control
Data
VT1530WDM
International
Fiber
Systems
ifs
Incorporated
203.426.1180
up to 43 miles
(69 km)
1 Fiber
9/125µ m SM
VR1530WDM
International
Fiber
Systems
ifs
Incorporated
203.426.1180
Video
(Coax)
Control
Data
interlogix.com
Specifications
Data
Data Interface: RS-232 (data lines only), or RS-422 (see note)
Data Rate: DC - 1.5 Mbps (NRZ)
Operating Mode: Asynchronous Simplex or Full-Duplex
Bit Error Rate: <1 in 10˚
Wavelength D1010: 850 nm, MM D1010WDMA: 850/1310 nm, MM
D1010WDMB: 1310/850 nm, MM D1020: 1310 nm, MM
D1030: 1310 nm, SM D1030WDMA: 1310 nm, SM
D1030WDMB: 1550 nm, SM
Number Of Fibers D1010: 2 D1010WDMA: 1 D1010WDMB: 1 D1020: 2
D1030: 2 D1030WDMA: 1 D1030WDMB: 1
Connectors
Optical: ST
Data and Power: Terminal Block with Screw Clamps
Electrical & Mechanical
Power:
Surface Mount: 12 VDC @ 150 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 4.2 x 4.0 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
VT/VR1500WDM Series
IFS FM Video with Return Data
Ordering Information
Multimode 62.5/125µm**
Single Mode 9/125µm
Accessories
Options
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. All accessories are third party manufactured.
Specifications
Video
Video Input: 1 volt pk-pk (75 ohms)
Bandwidth: 5 Hz - 8.0 MHz
Differential Gain: <5%
Differential Phase: <5°
Tilt: <1%
Signal-to-Noise Ratio (SNR):
Data
Data Interface: RS-232, RS-422, Transformer
Data Format: NRZ, NRZI, Manchester, Bi-phase
Data Rate: DC-50 Kbps (NRZ)
Operating Mode: Full Duplex
Wavelength
VTVR1520WDM: 1310/1550 nm, Multimode
VTVR1530WDM: 1310/1550 nm, Single Mode
Number Of Fibers
Connectors
Optical: ST
Power and Data: Terminal Block with Screw Clamps
Video and Sync: BNC (Gold Plated Center-Pin)
Electrical & Mechanical
Power:
Surface Mount: 12 VDC @ 300 mA
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Max. RG59 Cable Length: 750 ft.
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Rack Mount: 7.7 x 5.0 x 1.0 in., 19.6 x 12.7 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)
North America
T 855-286-8889
Part Number Description Fibers Required Optical Pwr. Budget Max. Distance*
VT1520WDM Video Transmitter/Data Receiver (1310/1550 nm, Laser) 1 15 dB 9 miles (15 km)
VR1520WDM Video Receiver/Data Transmitter (1550/1310 nm, Laser) 1 15 dB 9 miles (15 km)
VT1530WDM Video Transmitter/Data Receiver (1310/1550 nm, Laser) 1 23 dB 43 miles (69 km)
VR1530WDM Video Receiver/Data Transmitter (1550/1310 nm, Laser) 1 23 dB 43 miles (69 km)
PS12VDC1.5A-U 12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
>55 dB @ 10 dB ATTN.
>60 dB @ 7 dB ATTN.
Latin America
T 561-998-6114
VTVR1520WDM: 1, VTVR1530WDM: 1
Specifications subject to change without notice.
Interlogix is part of UTC Building & Industrial Systems,
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
© 2013 United Technologies Corporation
a unit of United Technologies Corporation.
Agency Compliance
Complies with FDA Performance
interlogix.com
All rights reserved.
VT/VR1500WDM Series