Interlogix VT14130 Specsheet
®
MAX.
DISTANCE*
1550 nm, Singlemode
VT Transmitter Unit:
• Video Input Sync Presence
• Video Input Overload
• Operating Power
VR Receiver Unit:
• Video Output Sync Presence
• Video Output Overload
• Optical Carrier Detect/ Link-Lock
• Operating Power
CONNECTORS
Power: Terminal block with screw clamps
Video: BNC (Gold Plated Center-Pin)
Optical: ST , SC or FC (see ordering information)
ELECTRICAL & MECHANICAL
Power:
Surface Mount: +12 VDC @500 mA
Rack: From Rack
Number of Rack Slots: 2
Current Protection: Automatic Resettable Solid-State Current
Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.0 x 2.0 in., 17.8 x 10.2 x 5.1 cm
Rack Mount: 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
Shipping Weight: < 2 lbs./ 0.9 kg
ENVIRONMENTAL
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
† May be extended to condensation conditions by adding suffix ‘–C’ to model
number for conformal coating.
10 dB
23 dB
27 dB
VT14120
VT14130
VT14150
VR14120
VR14130
VR14150
TRANSMITTER
RECEIVER
OPTICAL
PWR BUDGET
MODEL
MODEL
2 miles (3 km)
43 miles (69 km)
67 miles (108 km)
1 Fiber
9/125µm SM
AGENCY COMPLIANCE
MADE IN THE USA
Federal Supply Schedule
Contract No. GS-07F-0049M
Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J
Line / Fiber Transmission
IFS
V T/ VR14100 Series
IFS 10 Bit Digitally Encoded Video
Transmitter and Receiver
OVERVIEW
The IFS VT/VR14100 Series video transmitter and video
units utilize state-of-the-ar
true broadcast-quality video transmission that exceeds the requirements of EIARS-250C for Short-Haul Video Transmission. These
environmentally hardened units provide transmission of video over
one singlemode or multimode fiber optic cable and are ideal for use
in unconditioned road side or out-of-plant installations. As the level
of video performance is so high, the VT/VR14100 Series is ideally
suited to networks employing multiple physical layers where video
degradation may be problem, such as FDM or digitally encoded
video multiplexing links, T-1 or fractional T-1 codecs, and SONET or
ATM backbones. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera
system. Plug-and-play design ensures ease of installation and no
el
are provided for rapidly ascertaining equipment operating status,
and this equipment is available in either stand-alone or rack mount
configurations.
ctrical or o
e ptical adjustments are ever required. LED indicators
APPLICATION EX AMPLES
• High Performance CCTV (Fixed Video)
t 10-bit digital encoding and decoding for
receiver
STANDARD FEATURES
• State-of-the-Art 10-Bit Digitally Encoded Video Transmission
• Exceeds All Requirements for RS-250C Short-Haul Transmission:
True Broadcast Video Performance
• Exceptionally Low Video Distortion with Zero Performance Variation
vs. Optical Path Loss
• Ideally Suited to Networks Requiring Multiple Physical Layers Where
Video Degradation May Be a Problem
• Directly Compatible with All NTSC, PAL, or SECAM CCTV Camera
Systems
• LED Status Indicators Provide Rapid Indication of Critical Operating
Parameters
• Solid-State Current Limiters on All Power Lines Provide Equipment
Protection
• Wide Optical Dynamic Range: Optical Attenuators are Never
Required
• Exceeds NEMATS-1/TS-2 and Caltrans Traffic Signal Control
Equipment Environmental Specifications for Operating Temperature,
Shock, Vibration, Humidity, and Voltage Transient Protection
• Robust Design Ensures Extremely High Reliability In Unconditioned
Roadside Environments
• Comprehensive Lifetime Warranty
SYSTEM DESIGN
interlogix.com
Specifications
Data
Data Interface: RS-232 (data lines only), or RS-422 (see note)
Data Rate: DC - 1.5 Mbps (NRZ)
Operating Mode: Asynchronous Simplex or Full-Duplex
Bit Error Rate: <1 in 10˚
Wavelength D1010: 850 nm, MM D1010WDMA: 850/1310 nm, MM
D1010WDMB: 1310/850 nm, MM D1020: 1310 nm, MM
D1030: 1310 nm, SM D1030WDMA: 1310 nm, SM
D1030WDMB: 1550 nm, SM
Number Of Fibers D1010: 2 D1010WDMA: 1 D1010WDMB: 1 D1020: 2
D1030: 2 D1030WDMA: 1 D1030WDMB: 1
Connectors
Optical: ST
Data and Power: Terminal Block with Screw Clamps
Electrical & Mechanical
Power:
Surface Mount: 12 VDC @ 150 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 4.2 x 4.0 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
V T/VR14100 Serie s
IFS 10 Bit Digitally Encoded Video
Transmitter and Receiver
Ordering Information
Multimode 62.5/125µm** VT14120 Video Transmitter/Stand-alone module (1310 nm) 1 10 dB 2 miles (3 km)
Singlemode 9/125µm VT14130 Video Transmitter/Stand-alone module (1310 nm) 1 23 dB 43 miles (69 km)
Accessories ♦
Options Add ‘-R3’to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦
All accessories are third party manufactured.
Specifications
Video
Video Input: 1 volt pk-pk (75 ohms)
Bandwidth: 5 Hz - 10 MHz
Differential Gain: <2%
Differential Phase: <0.7°
Tilt: <1%
Signal-to-Noise Ratio (SNR): >67 dB @ Maximum Optical Loss Budget
Wavelength
Optical Emitter
Number Of Fibers
LED Indicators
VT Transmitter Unit: Video Input Sync Presence
VR Receiver Unit: Video Output Sync Presence
Connectors
Power: Terminal block with screw clamps
Video: BNC (Gold Plated Center-Pin)
Optical: ST, SC, or FC (see ordering information)
Electrical & Mechanical
Power:
Surface Mount: +12 VDC @ 500 mA
Rack: From Rack
Number of Rack Slots 2
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.0 x 2.0 in., 17.8 x 10.2 x 5.1 cm
Rack Mount: 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)
North America
T 855-286-8889
Part Number Description Fibers Required Optical Pwr. Budget Max. Distance*
VR14120 Video Receiver/Stand-alone module (1310 nm) 1 10 dB 2 miles (3 km)
VR14130 Video Receiver/Stand-alone module (1310 nm) 1 23 dB 43 miles (69 km)
VT14150 Video Transmitter/Stand-alone module (1550 nm) 1 27 dB 67 miles (108 km)
VR14150 Video Receiver/Stand-alone module (1550 nm) 1 27 dB 67 miles (108 km)
PS12VDC1.5A-U 12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
1310 nm, Multimode
1550 nm, Singlemode
Laser Diode (all models)
1
Latin America
T 561-998-6114
Video Input Overload
Operating Power
Video Output Overload
Optical Carrier Detect/ Link-Lock
Operating Power
Specifications subject to change without notice.
Interlogix is par t of UTC Building & Industrial Systems,
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
© 2013 United Technologies Corporation
a unit of United Technologies Corporation.
Agency Compliance
Complies with FDA Performance
interlogix.com
All rights reser ved.
V T/ VR1410 0 Se r ies
Loading...