Interlogix VR7230-2DRDT-FC, VR7230-2DRDT-FC-R3 Specsheet
VT/VR7200-2DRDT Series
IFS 2-Channel Digitally Encoded Video
and 2 Bi-Directional Data Multiplexer
Overview
The IFS VT/VR7200-2DRDT video transmitter/data
transceiver and video receiver/data transceiver series
utilizes state-of-the-art 8-bit digital encoding and decoding
for high-quality video transmission that exceeds the
requirements of EIA RS-250C for Medium-Haul Video
Transmission. These environmentally hardened units
provide transmission of two independent video channels
and two bi-directional data channels over one single
mode or multimode optical fiber and are ideal for use
in unconditioned roadside or out-of-plant installations.
Completely transparent to and universally compatible
with any NTSC, PAL, or SECAM CCTV camera system. Data
channels can be set independently for RS-232, RS-422 and
2 or 4-wire RS-485 with tri-state support. Plug-and-play
design ensures ease of installation and no electrical or
optical adjustments are ever required. LED indicators are
provided for rapidly ascertaining equipment operating
status, and these units are available in either stand-alone
or rack mount configurations.
Application Examples
• High Performance CCTV with PTZ Control
• High Performance CCTV with Access Control
2-Channel Digitally
Standard Features
•
Real-Time Color Video Signals and 2 Bi-Directional Data
Signals on One Single Mode Optical Fiber
•
TriState Data Interfaces
•
Operating Parameters
•
Performance Variation vs. Optical Path Loss
•
Layers where Video Degradation May be a Problem
•
CCTV Camera Systems
•
Laboratory for Full Compliance with the Environmental
Requirements (Ambient Operating Temperature,
Mechanical Shock, Vibration, Humidity with Condensation,
High-Line/Low-Line Voltage Conditions and Transient
Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
•
Unconditioned Out-of-Plant Environments
•
Unconditional Equipment Protection
• Comprehensive Lifetime Warranty
Encoded Video
and 2 Bi-Directional
Data Multiplexer
Utilizes 8-bit digital encoding
and decoding for high-quality
video transmission.
up to 1.2 miles
(2 km)
Data
Communications
Data
Communications
2 Video Inputs
(Coax)
VT7220-2DRDT-R3 VR7220-2DRDT-R3
2 Video Outputs (Coax)
to monitors or switches
Control
Data
Control
Data
Remote
Panel
PTZ Control
Master
Controller
1 Fiber
9/125µm SM
ifs
International
Fiber
Systems
Incorporated
203.426.1180
ifs
International
Fiber
Systems
Incorporated
203.426.1180
Specifications
Video
Video Input: 1 volt pk-pk (75 ohms)
Input/Ouput Channels: 2
Bandwidth: 10 Hz - 6.5 MHz per channel
Differential Gain: <2%
Differential Phase: <0.7°
Tilt: <1%
Signal-to-Noise Ratio (SNR): 60 dB @ Max. Optical Loss Budget
Data
Data Channel: 2
Data Format: RS-232, RS-422, 2-w or 4-w RS-485 with Tri-State, Manchester, Bi-phase
Wavelength 1310/1550 nm, Multimode or Single Mode
Optical emitter Laser Diode
Number of fibers 1
Connectors
Optical: ST, SC or FC (see ordering information)
Power: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)
Electrical & Mechanical
Power: 12 VDC @ 500 mA (stand-alone)
Number of Rack Slots: 3
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount (Transmitter): 7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.1 cm
Surface Mount (Receiver): 7.0 x 4.9 x 3.0 in., 17.8 x 12.5 x 7.5 cm
Rack Mount: 7.7 x 5.0 x 3.0 in., 19.6 x 12.7 x 7.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
Ordering Information
Part Number Optical Pwr. Budget Max. Distance*
Multimode
62.5/125µm**
Single Mode
9/125µm
Accessories
♦
Options
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦All accessories are third party manufactured.
VT7220-2DRDT
VR7220-2DRDT
VT7230-2DRDT
VR7230-2DRDT
VT7230-2DRDT-HP
VR7230-2DRDT-HP
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-SC’ to model number for SC Optical Connector (For Single Mode equipment only)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Add ‘-HP’ to VT Model Number for 26 dB Single Mode Optical Power Budget
Add ‘-FC’ to model number for FC Optical Connector (For Single Mode equipment only)
Description
2-Channel Video Transmitter/Data Transceiver (1310/1550 nm)
2-Channel Video Receiver/Data Transceiver (1310/1550 nm)
2-Channel Video Transmitter/Data Transceiver (1310/1550 nm)
2-Channel Video Receiver/Data Transceiver (1310/1550 nm)
2-Channel Video Transmitter/Data Transceiver (1310/1550 nm)
2-Channel Video Receiver/Data Transceiver (1310/1550 nm)
Fibers Required
1
1
1
System Design
7 dB
17 dB
23 dB
1.2 miles (2 km)
31 miles (51 km)
43 miles (69 km)
Loading...