Interlogix VR71230-R3 Specsheet
GE
VT/VR71230-R3
Security
The IFS VT/VR71230-R3 video transmitter and video
receiver utilize state-of-the-art 8-bit digital encoding and
decoding for high-quality video transmission that exceeds
the requirements of EIA RS-250C for Medium-Haul Video
Transmission. These environmentally hardened units
provide transmission of twelve independent video channels
over one single mode or multimode optical fiber and are
ideal for use in unconditioned roadside or out-of-plant
installations. Completely transparent to and universally
compatible with any NTSC, PAL, or SECAM CCTV camera
system. Plug-and-play design ensures ease of installation
and no electrical or optical adjustments are ever required.
LED indicators are provided for rapidly ascertaining
equipment operating status, and these units are available in
rack-mount configuration only.
IFS 12-Channel Digitally Encoded
Video Multiplexer
Standard FeaturesOverview
• 8-Bit Digitally Encoded Video Transmission Transmits 12
Real-Time Color Video Channels on One Optical Fiber
• Exceeds All Requirements for RS-250C Medium-Haul
Transmission: Extremely High Video Performance
• Exceptionally Low Video Distortion with Zero Performance
Variation vs. Optical Path Loss
• Ideally Suited to Networks Requiring Multiple Physical
Layers where Video Degradation may be a Problem
• Tested and Certified by an Independent Testing
Laboratory for Full Compliance with the Environmental
Requirements (Ambient Operating Temperature,
Mechanical Shock, Vibration, Humidity with Condensation,
High-Line/Low-Line Voltage Conditions and Transient
Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
• Directly Compatible with All NTSC, PAL, or SECAM CCTV
Camera Systems
• Robust Design Ensures Extremely High Reliability In
Unconditioned Out-of-Plant Environments
• LED Status Indicators Provide Rapid Indication of Critical
Operating Parameters
• Solid-State Current Limiters on All Power Lines Provide
Equipment Protection
• Includes R3 Rack
• Comprehensive Lifetime Warranty
12-Channel
Digitally Encoded
Video Multiplexer
Utilizing state-of-the-art 8-bit
digital encoding and decoding for
high-quality video transmission.
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
Agency compliance
Specifications
Video
Video Input: 1 volt pk-pk (75 ohms)
Input/Output Channels: 12
Bandwidth: 10 Hz - 6.5 MHz
Differential Gain: <2%
Differential Phase: <0.7°
Tilt: <1%
Signal-to-Noise Ratio (SNR): >60 dB @ Maximum Optical Loss Budget
Wavelength 1310/1550 nm, Single Mode or Multimode
Opticalemitter Laser Diode
Numberoffibers 1
Connectors
Optical: ST, SC or FC (see ordering information)
Video: BNC (Gold Plated Center-Pin)
Electrical&Mechanical
Power: 115/230 VAC
Number of Rack Slots: 6
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Rack Mount: 19.0 x 7.0 x 5.3 in., 48.3 x 17.8 x 13.3 cm
Shipping Weight: < 12 lbs./5.4 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
*NOTE: All optical terminations need to be epoxy polished with a minimum back reflection of -30 dB.
System Design
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
12 Video Inputs
(Coax)
VT71230 VR71230
up to 22 miles
(36 km)
1 Fiber
9/125m SM
12 Video Outputs (Coax)
to monitors or switches
Ordering Information
PartNumber OpticalPwr.Budget Max.Distance*
Multimode
62.5/125μm**
Single Mode
9/125μm
Options
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth.
** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
VT71220-R3
VR71220-R3
VT71230-R3
VR71230-R3
Add ‘-C’ to Model Number for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Add ‘-SC” to Model Number for SC Connector
Add ‘-FC’ to Model Number for FC Optical Connector
Description
12 Channel Video Transmitter/Multiplexer (1310/1550 nm)
12 Channel Video Receiver/Demultiplexer (1310/1550 nm)
12 Channel Video Transmitter/Multiplexer (1310/1550 nm)
12 Channel Video Receiver/Demultiplexer (1310/1550 nm)
FibersRequired
1
1
6dB
12 dB
1.2 miles (2 km)
22 miles (36 km)
Loading...